You are on page 1of 2

BEEE Tutorial Problems – Mesh and Nodal analysis.

1. Determine the voltages at nodes 1 and 2.

2. Determine the voltages at nodes V1 and V2. Find the power dissipated by 20 ohm resistor.

3. Determine the voltages at nodes V1 and V2. Find the power dissipated by 8 and 5 ohm resistor.

4. Using nodal analysis, find the power dissipated in 9 ohm resistor.

5. Using nodal analysis find the voltage across 20 Ω resistor.

DR L.PADMAVATHI Page 1
6. Determine the loop currents using mesh analysis.

7. Determine the loop currents using mesh analysis.

8. Determine the current through 5 ohm resistance using mesh method.

9. Using Kirchhoff’s laws, find the current in 40 Ω resistors in the circuit shown.

10. Using Kirchhoff’s laws, find the current in all the resistors in the circuit shown.

DR L.PADMAVATHI Page 2

You might also like