Professional Documents
Culture Documents
• For the circuit, use superposition to find 𝑖. Calculate the power delivered to the
resistor.
Obtain 𝑣 0 in the circuit using source transformation.
• For the circuit, calculate the value of R that will make the energy stored in the
capacitor the same as that stored in the inductor under dc conditions
• For the circuit, calculate the value of R that will make the energy stored in
the capacitor the same as that stored in the inductor under dc conditions
• For the circuit 𝑖𝑥 = 6 cos 10 3 𝑡 A, find the average power absorbed by the 50
resistor.
• Use Nodal analysis to find V in the circuit.
• Use mesh analysis to find Vo in the circuit. Let
𝑣 𝑠1 = 120 cos(100𝑡 + 90 0 ); 𝑣 𝑠2 = 80 cos(100𝑡)
Find 𝑖0 in the circuit using superposition.
Use the method of source transformation to find 𝐈𝐱 in the circuit.
Find Vx in the circuit
For the three coupled coils in the circuit, calculate the total inductance
• For the circuit, find 𝑍𝑒𝑞 and use that to find current 𝐼. Let 𝜔 = 10 𝑟𝑎𝑑/𝑠
6. For the circuit shown here, find the equivalent resistance. All resistors are 1
Ohm.
1/4/2024
Calculate the equivalent resistance at terminals a-b for each of the circuits.
Calculate the equivalent resistance at terminals a-b for each of the circuits.
• i(t) = ?
• Vc(t) = ?
• three impedances (10+j 8) ohms are connected in star across a 400 V 3 phase
supply. Determine the line and phase current
• three impedances (10+j 8) ohms are connected in star across a 400 V 3 phase
supply. Determine the total power consumed?
• In a three-phase four-wire system the line voltage is 400V and non-inductive
loads of 5 kW, 8 kW and 10 kW are connected between the three conductors
and the neutral. Calculate the current in each phase and the current in the
neutral conductor.
1/4/2024