Professional Documents
Culture Documents
379
K0725
Handwheels 2-spoke
plastic
Material:
H Handwheel reinforced and stabilised polyamide.
H2 Centre plugs polyamide.
Tapped bush steel.
Version:
Handwheel oil and grease resistant, black (RAL 9011),
satin finish.
Centre plugs, grey (RAL 7035 cod. 13).
D H7
Sample order:
K0725.0080X08
On request:
Other cap colours,
special versions.
H1
D1 L1
380
K0725
Handwheels 2-spoke
plastic, with revolving grip
Material:
L1 Handwheel reinforced and stabilised polyamide.
H Centre plugs polyamide.
H2 Tapped bush steel.
Tapped insert for cylinder grip brass.
Version:
Handwheel oil and grease resistant, black (RAL 9011),
satin finish.
Centre plugs, grey (RAL 7035 cod. 13).
D H7
Sample order:
K0725.4080X08
A
On request:
Other cap colours,
D4
H1 special versions.
D1 L2
L
381
K0725
Handwheels 2-spoke
plastic, with folding grip
Material:
L3 Handwheel reinforced and stabilised polyamide.
H Centre plugs polyamide.
Tapped bush and insert for cylinder grip steel.
Version:
Handwheel oil and grease resistant, black (RAL 9011),
satin finish.
Centre plugs, grey (RAL 7035 cod. 13).
Tapped bush and insert for folding grip black oxidised.
D H7
D2
Sample order:
K0725.6130X12
A
On request:
Other cap colours,
D4
special versions.
D1 H1
L1 L2
L
382
Notes
383
K0671
Handwheels
DIN 950 grey cast iron
DIN 98 Form E
DIN 39 Form E
D2 H7
D1 Material:
D3
D3
Handwheel grey cast iron.
Grip steel.
L1
Version:
Wheel rim turned and polished.
Radial and axial run-out of rim < IT 12.
Sample order:
L3 K0671.4080X10
On request:
Hubs with square socket or plastic-coated handwheels.
keyway DIN 6885-1
B3 P9
H7
D2
T
384
K0671
Handwheels
DIN 950 grey cast iron
KIPP Handwheels DIN 950 grey cast iron, with fixed grip
Order No. Order No. D1 D2 D2 D3 L1 L3 B3 B3 T T No.of fixed grip
hub without slot hub with slot series 1 series 2 series 1 series 2 series 1 series 2 spokes DIN 39
Form E
K0671.2080X10 K0671.3080X10 80 10 - 25 16 29 3 - 11,4 - 3 ø16 x M6 x 50
K0671.2080X12 K0671.3080X12 80 - 12 25 16 29 - 4 - 13,8 3 ø16 x M6 x 50
K0671.2100X10 K0671.3100X10 100 10 - 26 17 33 3 - 11,4 - 3 ø16 x M6 x 50
K0671.2100X12 K0671.3100X12 100 - 12 26 17 33 - 4 - 13,8 3 ø16 x M6 x 50
K0671.2125X12 K0671.3125X12 125 12 - 33 18 36 4 - 13,8 - 3 ø20 x M8 x 64
K0671.2125X14 K0671.3125X14 125 - 14 33 18 36 - 5 - 16,3 3 ø20 x M8 x 64
K0671.2140X14 K0671.3140X14 140 14 - 33 19 39 5 - 16,3 - 3 ø20 x M8 x 64
K0671.2140X16 K0671.3140X16 140 - 16 33 19 39 - 5 - 18,3 3 ø20 x M8 x 64
K0671.2160X14 K0671.3160X14 160 14 - 37 20 40 5 - 16,3 - 3 ø25 x M10 x 80
K0671.2160X16 K0671.3160X16 160 - 16 37 20 40 - 5 - 18,3 3 ø25 x M10 x 80
K0671.2180X16 K0671.3180X16 180 16 - 36 22 43 5 - 18,3 - 3 ø25 x M10 x 80
K0671.2180X18 K0671.3180X18 180 - 18 36 22 43 - 6 - 20,8 3 ø25 x M10 x 80
K0671.2200X18 K0671.3200X18 200 18 - 38 24 45 6 - 20,8 - 3 ø25 x M10 x 80
K0671.2200X22 K0671.3200X22 200 - 22 38 24 45 - 6 - 24,8 3 ø25 x M10 x 80
K0671.2250X22 K0671.3250X22 250 22 - 46 28 50 6 - 24,8 - 5 ø32 x M12 x 100
K0671.2250X26 K0671.3250X26 250 - 26 46 28 50 - 8 - 29,3 5 ø32 x M12 x 100
K0671.2315X26 K0671.3315X26 315 26 - 54 33 56 8 - 29,3 - 5 ø32 x M12 x 100
K0671.2315X30 K0671.3315X30 315 - 30 54 33 56 - 8 - 33,3 5 ø32 x M12 x 100
K0671.2400X30 K0671.3400X30 400 30 - 68 38 63 8 - 33,3 - 5 ø36 x M16 x 112
K0671.2400X34 K0671.3400X34 400 - 34 68 38 63 - 10 - 37,3 5 ø36 x M16 x 112
K0671.2500X34 K0671.3500X34 500 34 - 79 45 72 10 - 37,3 - 5 ø36 x M16 x 112
K0671.2500X40 K0671.3500X40 500 - 40 79 45 72 - 12 - 43,3 5 ø36 x M16 x 112
KIPP Handwheels DIN 950 grey cast iron, with revolving grip
Order No. Order No. D1 D2 D2 D3 L1 L3 B3 B3 T T No.of revolving
hub without slot hub with slot series 1 series 2 series 1 series 2 series 1 series 2 spokes grip DIN 98
Form E
K0671.4080X10 K0671.5080X10 80 10 - 25 16 29 3 - 11,4 - 3 ø16 x M6 x 54,5
K0671.4080X12 K0671.5080X12 80 - 12 25 16 29 - 4 - 13,8 3 ø16 x M6 x 54,5
K0671.4100X10 K0671.5100X10 100 10 - 26 17 33 3 - 11,4 - 3 ø16 x M6 x 54,5
K0671.4100X12 K0671.5100X12 100 - 12 26 17 33 - 4 - 13,8 3 ø16 x M6 x 54,5
K0671.4125X12 K0671.5125X12 125 12 - 33 18 36 4 - 13,8 - 3 ø20 x M8 x 67
K0671.4125X14 K0671.5125X14 125 - 14 33 18 36 - 5 - 16,3 3 ø20 x M8 x 67
K0671.4140X14 K0671.5140X14 140 14 - 33 19 39 5 - 16,3 - 3 ø20 x M8 x 67
K0671.4140X16 K0671.5140X16 140 - 16 33 19 39 - 5 - 18,3 3 ø20 x M8 x 67
K0671.4160X14 K0671.5160X14 160 14 - 37 20 40 5 - 16,3 - 3 ø25 x M10 x 83
K0671.4160X16 K0671.5160X16 160 - 16 37 20 40 - 5 - 18,3 3 ø25 x M10 x 83
K0671.4180X16 K0671.5180X16 180 16 - 36 22 43 5 - 18,3 - 3 ø25 x M10 x 83
K0671.4180X18 K0671.5180X18 180 - 18 36 22 43 - 6 - 20,8 3 ø25 x M10 x 83
K0671.4200X18 K0671.5200X18 200 18 - 38 24 45 6 - 20,8 - 3 ø25 x M10 x 83
K0671.4200X22 K0671.5200X22 200 - 22 38 24 45 - 6 - 24,8 3 ø25 x M10 x 83
K0671.4250X22 K0671.5250X22 250 22 - 46 28 50 6 - 24,8 - 5 ø32 x M12 x 105,5
K0671.4250X26 K0671.5250X26 250 - 26 46 28 50 - 8 - 29,3 5 ø32 x M12 x 105,5
K0671.4315X26 K0671.5315X26 315 26 - 54 33 56 8 - 29,3 - 5 ø32 x M12 x 105,5
K0671.4315X30 K0671.5315X30 315 - 30 54 33 56 - 8 - 33,3 5 ø32 x M12 x 105,5
K0671.4400X30 K0671.5400X30 400 30 - 68 38 63 8 - 33,3 - 5 ø36 x M16 x 117
K0671.4400X34 K0671.5400X34 400 - 34 68 38 63 - 10 - 37,3 5 ø36 x M16 x 117
K0671.4500X34 K0671.5500X34 500 34 - 79 45 72 10 - 37,3 - 5 ø36 x M16 x 117
K0671.4500X40 K0671.5500X40 500 - 40 79 45 72 - 12 - 43,3 5 ø36 x M16 x 117
385
K0160
Handwheels
DIN 950, aluminium
DIN 98 Form E
DIN 39 Form E
D2 H7
D1 Material:
D3
D3
Handwheel aluminium.
Fixed grip aluminium, axle part steel, black oxidised.
L1 Revolving grip aluminium, axle part steel, galvanized
and blue chromed.
Version:
Wheel rim turned and polished.
Radial and axial run-out of rim < IT 12.
L3
Sample order:
K0160.4080X10
keyway DIN 6885-1
On request:
B3 P9 Hubs with square socket or plastic-coated handwheels.
H7
D2
T
386
K0160
Handwheels
DIN 950, aluminium
KIPP Handwheels DIN 950 aluminium, with fixed grip
Order No. Order No. D1 D2 D2 D3 L1 L3 B3 B3 T T No.of fixed grip
hub without slot hub with slot series 1 series 2 series 1 series 2 series 1 series 2 spokes DIN 39
Form E
K0160.2080X10 K0160.3080X10 80 10 - 25 16 29 3 - 11,4 - 3 ø16 x M6 x 50
K0160.2080X12 K0160.3080X12 80 - 12 25 16 29 - 4 - 13,8 3 ø16 x M6 x 50
K0160.2100X10 K0160.3100X10 100 10 - 29 17 33 3 - 11,4 - 3 ø16 x M6 x 50
K0160.2100X12 K0160.3100X12 100 - 12 29 17 33 - 4 - 13,8 3 ø16 x M6 x 50
K0160.2125X12 K0160.3125X12 125 12 - 31 18 36 4 - 13,8 - 3 ø20 x M8 x 64
K0160.2125X14 K0160.3125X14 125 - 14 31 18 36 - 5 - 16,3 3 ø20 x M8 x 64
K0160.2140X14 K0160.3140X14 140 14 - 36 19 39 5 - 16,3 - 3 ø20 x M8 x 64
K0160.2140X16 K0160.3140X16 140 - 16 36 19 39 - 5 - 18,3 3 ø20 x M8 x 64
K0160.2160X14 K0160.3160X14 160 14 - 36 20 40 5 - 16,3 - 3 ø25 x M10 x 80
K0160.2160X16 K0160.3160X16 160 - 16 36 20 40 - 5 - 18,3 3 ø25 x M10 x 80
K0160.2180X16 K0160.3180X16 180 16 - 37 22 43 5 - 18,3 - 3 ø25 x M10 x 80
K0160.2180X18 K0160.3180X18 180 - 18 37 22 43 - 6 - 20,8 3 ø25 x M10 x 80
K0160.2200X18 K0160.3200X18 200 18 - 43 24 45 6 - 20,8 - 3 ø25 x M10 x 80
K0160.2200X22 K0160.3200X22 200 - 22 43 24 45 - 6 - 24,8 3 ø25 x M10 x 80
K0160.2250X22 K0160.3250X22 250 22 - 49 28 50 6 - 24,8 - 5 ø32 x M12 x 100
K0160.2250X26 K0160.3250X26 250 - 26 49 28 50 - 8 - 29,3 5 ø32 x M12 x 100
K0160.2315X26 K0160.3315X26 315 26 - 54 33 56 8 - 29,3 - 5 ø32 x M12 x 100
K0160.2315X30 K0160.3315X30 315 - 30 54 33 56 - 8 - 33,3 5 ø32 x M12 x 100
K0160.2400X30 K0160.3400X30 400 30 - 65 38 63 8 - 33,3 - 5 ø36 x M16 x 112
K0160.2400X34 K0160.3400X34 400 - 34 65 38 63 - 10 - 37,3 5 ø36 x M16 x 112
K0160.2500X34 K0160.3500X34 500 34 - 79 45 72 10 - 37,3 - 5 ø36 x M16 x 112
K0160.2500X40 K0160.3500X40 500 - 40 79 45 72 - 12 - 43,3 5 ø36 x M16 x 112
387
K0161
Handwheels disc
aluminium
Material:
Disc handwheel aluminium.
Cylinder grip black Duroplast PF 31-DIN 7708.
Hub galvanized steel.
Version:
Wheel rim turned and polished.
Radial and axial run-out of rim < IT 12.
Sample order:
D2 H7
D1
D3
D3
K0161.4080X10
On request:
L1
Hubs with square socket or plastic-coated
handwheels.
L3
B3 P9
H7
D2
T
388
K0161
Handwheels disc
aluminium
389
K0162
Handwheels 2-spoke
flat rim, aluminium
Material:
Handwheels aluminium.
Cylinder grip black Duroplast PF 31-DIN 7708.
Hub galvanized steel.
Version:
Wheel rim turned and polished.
D2 H7 Radial and axial run-out of rim < IT 12.
Sample order:
D1
D3
D3
K0162.4080X10
On request:
L1
Hubs with square socket or plastic-coated handwheels.
L3
B3 P9
H7
D2
T
390
K0162
Handwheels 2-spoke
flat rim, aluminium
KIPP Handwheels 2-spoke, aluminium, flat wheel rim, with fixed cylinder grip
Order No. Order No. D1 D2 D2 D3 L1 L3 B3 B3 T T Fixed
hub without slot hub with slot series 1 series 2 series 1 series 2 series 1 series 2 cylinder
grip
K0162.2080X10 K0162.3080X10 80 10 - 24 16 28 3 - 11,4 - ø18 x M6 x 40
K0162.2080X12 K0162.3080X12 80 - 12 24 16 28 - 4 - 13,8 ø18 x M6 x 40
K0162.2100X10 K0162.3100X10 100 10 - 26 17 33 3 - 11,4 - ø18 x M6 x 40
K0162.2100X12 K0162.3100X12 100 - 12 26 17 33 - 4 - 13,8 ø18 x M6 x 40
K0162.2125X12 K0162.3125X12 125 12 - 31 18 33,5 4 - 13,8 - ø21 x M8 x 50
K0162.2125X14 K0162.3125X14 125 - 14 31 18 33,5 - 5 - 16,3 ø21 x M8 x 50
K0162.2160X14 K0162.3160X14 160 14 - 36 20 39 5 - 16,3 - ø26 x M10 x 80
K0162.2160X16 K0162.3160X16 160 - 16 36 20 39 - 5 - 18,3 ø26 x M10 x 80
K0162.2200X18 K0162.3200X18 200 18 - 42 24 45 6 - 20,8 - ø26 x M10 x 80
K0162.2200X20 K0162.3200X20 200 - 20 42 24 45 - 6 - 22,8 ø26 x M10 x 80
K0162.2250X22 K0162.3250X22 250 22 - 48 28 51 6 - 24,8 - ø28 x M12 x 90
K0162.2250X26 K0162.3250X26 250 - 26 48 28 51 - 8 - 29,3 ø28 x M12 x 90
KIPP Handwheels 2-spoke, aluminium, flat wheel rim, with revolving cylinder grip
Order No. Order No. D1 D2 D2 D3 L1 L3 B3 B3 T T Revolving
hub without slot hub with slot series 1 series 2 series 1 series 2 series 1 series 2 cylinder
grip
K0162.4080X10 K0162.5080X10 80 10 - 24 16 28 3 - 11,4 - ø18 x M6 x 40
K0162.4080X12 K0162.5080X12 80 - 12 24 16 28 - 4 - 13,8 ø18 x M6 x 40
K0162.4100X10 K0162.5100X10 100 10 - 26 17 33 3 - 11,4 - ø18 x M6 x 40
K0162.4100X12 K0162.5100X12 100 - 12 26 17 33 - 4 - 13,8 ø18 x M6 x 40
K0162.4125X12 K0162.5125X12 125 12 - 31 18 33,5 4 - 13,8 - ø22 x M8 x 56
K0162.4125X14 K0162.5125X14 125 - 14 31 18 33,5 - 5 - 16,3 ø22 x M8 x 56
K0162.4160X14 K0162.5160X14 160 14 - 36 20 39 5 - 16,3 - ø26 x M10 x 80
K0162.4160X16 K0162.5160X16 160 - 16 36 20 39 - 5 - 18,3 ø26 x M10 x 80
K0162.4200X18 K0162.5200X18 200 18 - 42 24 45 6 - 20,8 - ø26 x M10 x 80
K0162.4200X20 K0162.5200X20 200 - 20 42 24 45 - 6 - 22,8 ø26 x M10 x 80
K0162.4250X22 K0162.5250X22 250 22 - 48 28 51 6 - 24,8 - ø31 x M12 x 102
K0162.4250X26 K0162.5250X26 250 - 26 48 28 51 - 8 - 29,3 ø31 x M12 x 102
391
K0163
Handwheels disc
similar to DIN 950, aluminium
Material:
L3
Handwheel aluminium.
Version:
Wheel rim turned and polished.
Radial and axial run-out of rim < IT 12.
Sample order:
L1 K0163.0080X10
On request:
D2 H7
D1
D3
D3
B3 P9
H7
D2
T
392
K0164
Handwheels disc
with revolving grip
Form D L2
pilot hole
H
H2
Material:
Duroplast PF 31, black.
D5
D6
D3
D4
D2
D
Hubs nickel-plated steel or bright stainless steel
1.4305.
Revolving grip, metal parts nickel-plated or stainless
L1
steel 1.4305, bright.
Version:
D7
High-gloss polished.
H1 Sample order:
K0164.0125X08
L3 L4
Note:
The handwheel is supplied with the grip loose.
Form E
On request:
reamed hole
Other reamed holes.
D1
KIPP Handwheels disc, with revolving grip, metal parts stainless steel
Order No. Order No. Size D D1 D2 D3 D4 D5 D6 D7 H H1 H2 L1 L2 L3 L4
Form D Form E
K0164.2100X06 K0164.3100X10 1 100 -/10 H7 29 22 20 6/ - 79 M6 12/ - 9 8 29,5 19 39 54,7
K0164.2125X08 K0164.3125X12 2 125 -/12 H7 34 26 21 8/ - 101 M6 15/ - 9 8 34 24 46 54,7
K0164.2140X08 K0164.3140X14 3 140 -/14 H7 39 30 25 8/ - 110 M8 16/ - 12 8 38,5 27 52 82,2
K0164.2160X10 K0164.3160X16 4 160 -/16 H7 43 33 30 10/ - 128 M8 20/ - 12 8 41,3 30,1 57 82,2
- K0164.3160X18 4 160 18 H7 43 33 30 - 128 M8 - 12 8 41,3 30,1 57 82,2
393
K0165
Handwheels disc
without grip
Form D L2
pilot hole
L1 Material:
Black Duroplast PF 31.
Hub nickel-plated steel or bright stainless steel 1.4305.
D5
D3
D4
D2
Version:
D
High-gloss polished.
Sample order:
K0165.0100X06
H2
On request:
H Other reamed holes.
L3
Form E
reamed hole
D1
394
K0256
Handwheels
H
The transverse hole is positioned
H1
at 90° to the keyway
D7
H2
D H7
by precise rotation and secure grip. Novo·Grip
D3
D2
handwheels can be mounted and safely used on
A1 high-performance products.
0,5 Material:
Black grey thermoplastic.
Version:
L1 Steel parts black oxidised.
D1
Sample order:
assembly example K0256.108008
Note:
key/keyway cap
keyway DIN 6885-1
connection
The hub cap is supplied loose.
B3 P9 DIN 6885 The handwheels can be secured using a transverse pin
or by parallel key connection together with a DIN 6912
shaft socket head screw and a DIN 7349 washer.
Versions with transverse bore are fastened using the
ISO 4026 (DIN 913) grub screws.
DH7
bush
washer DIN 7349
socket head screw
DIN 6912
KIPP Handwheels
Order No. Order No. Size D D1 D2 D3 A1 H H1 L1 B3 T
without keyway with keyway
K0256.108008 K0256.10800802 1 8 80 25 19 2,5 17,5 13 37,5 -/2 -/9
K0256.108010 K0256.10801003 1 10 80 25 19 2,5 17,5 13 37,5 -/3 -/11,4
K0256.108012 K0256.10801204 1 12 80 25 19 2,5 17,5 13 37,5 -/4 -/13,8
K0256.210010 K0256.21001003 2 10 100 28 19 3 20 13 44 -/3 -/11,4
K0256.210012 K0256.21001204 2 12 100 28 19 3 20 13 44 -/4 -/13,8
K0256.312512 K0256.31251204 3 12 125 35 25 4 23,5 18,5 53 -/4 -/13,8
K0256.312514 K0256.31251405 3 14 125 35 25 4 23,5 18,5 53 -/5 -/16,3
K0256.312516 K0256.31251605 3 16 125 35 25 4 23,5 18,5 53 -/5 -/18,3
K0256.416014 K0256.41601405 4 14 160 45 25 5,6 28 18,5 64,5 -/5 -/16,3
K0256.416016 K0256.41601605 4 16 160 45 25 5,6 28 18,5 64,5 -/5 -/18,3
395
K0257
Handwheels
with revolving grip
L1
H
The transverse hole is positioned H1
at 90° to the keyway
D7
H2
Material:
Black grey thermoplastic.
D H7
D2
Version:
D3
A
Sample order:
K0257.108008
Note:
D5
396
K0258
Handwheels
with fold-down grip
L1
H
Material:
D H7 Black grey thermoplastic.
D2
D3
Version:
D4 A1
A
Steel parts black oxidised.
Sample order:
K0258.108008
D5
D6 0,5 L2 Note:
D1 L The hub cover is supplied loose.
The handwheels can be secured using a transverse pin
or by parallel key connection together with a DIN 6912
keyway DIN 6885-1 socket head screw and a DIN 7349 washer.
B3 P9 Versions with transverse bore are secured using the
ISO 4026 (DIN 913) grub screw.
For assembly example, see K0256.
DH7
397
K0259
Handwheels
with safety grip
L1
H
The transverse hole is positioned H1
at 90° to the keyway D7
H2
Material:
Black grey thermoplastic.
Version:
D H7 Steel parts black oxidised.
D3
D2
Sample order:
K0259.108008
D4 A1
A
Note:
The hub cover is supplied loose. The handwheels can
be secured using a transverse pin or by parallel key
D5
398
K0184
Handwheels
Material:
tapped hole reamed hole view "A" Handwheel Duroplast PF 31.
„A“ Bush steel, black oxidised.
D4 -0,2 Version:
High-gloss polished, black.
Sample order:
K0184.70112
H
H1
H2
D1 D2 H8
D3 -0,2 D
KIPP Handwheels
Order No. Version D D1 D2 D3 D4 H H1 H2
K0184.70110 tapped hole 70 M10 - 30 26,5 33,5 23 11,5
K0184.70112 tapped hole 70 M12 - 30 26,5 33,5 23 11,5
K0184.83112 tapped hole 83 M12 - 35 31,5 40 28 14
K0184.83116 tapped hole 83 M16 - 35 31,5 40 28 14
K0184.70212 reamed hole 70 - 12 30 26,5 33,5 23 11,5
K0184.70214 reamed hole 70 - 14 30 26,5 33,5 23 11,5
K0184.83214 reamed hole 83 - 14 35 31,5 40 28 14
K0184.83216 reamed hole 83 - 16 35 31,5 40 28 14
399
K0262
Positioning wheels
Version:
Blue chromed steel.
Sample order:
K0262.21066 (cap colour traffic red)
H
H1
Note:
T
D1 H8
H3
400
K0275
Deltawheels
SW
Ø5
D
Sample order:
K0275.050051 (colour signal green)
Note:
Δ Add the desired colour here. No colour code is
required for black grey.
H1
black grey signal green ∆ = 1 traffic red ∆ = 2 bright yellow ∆ = 3 traffic blue ∆ = 4
RAL 7021 RAL 6032 RAL 3020 RAL 1021 RAL 5017
KIPP Deltawheels
Order No. Size D D1 H H1 SW
(square)
K0275.05005Δ 1 50 12,5 10 7,3 5
K0275.05006Δ 1 50 12,5 10 7,3 6
K0275.06306Δ 2 63 15,8 12,6 9 6
K0275.06307Δ 2 63 15,8 12,6 9 7
K0275.08008Δ 3 80 20 16 12 8
K0275.08009Δ 3 80 20 16 12 9
401
K0726
Ball grips revolving
Material:
H Ball Duroplast PF 31.
Bush and screw steel or stainless steel 1.4305.
H1
Version:
H2 B Ball glossy black.
Steel blue chromed.
Stainless steel bright.
SW1
D1
D2
Sample order:
D
K0726.061
L H
H1
H2 B
SW1
D1
D2
SW2
402
K0684
Crank handles offset
similar to DIN 468
Material:
Crank arm malleable or ductile iron.
Form F
with fixed handle Version:
D1
Blasted.
H2
L2
403
K0685
Crank handles straight
similar to DIN 469
Material:
H1 Form F Crank arm malleable or ductile iron.
with fixed handle
Version:
Blasted.
D1
Form D
with revolving handle Sample order:
K0685.120X22
S
L1
H2
L2
404
K0727
Crank handles aluminium
D3
R Material:
Aluminium.
D H7
H
Grip thermoplastic.
Version:
H3
H2
Grip black.
D1 Sample order:
K0727.100
Notes
405
K0997
Crank handles aluminium
with fold-away grip
H1 Material:
Crank AlSi9Cu3 (3.2163).
H Cylinder grip thermoplastic (PA6) and steel.
Version:
Crank plastic powder coated, black.
Thermoplastic black.
Steel parts black oxidised.
H2
H3
Sample order:
A K0997.1110
L Note:
Similar to DIN 469.
reamed hole
D2
D1
D H7
square socket
SW
406
K0996
Crank handles aluminium
with revolving grip
Material:
H1 Crank AlSi9Cu3 (3.2163).
Revolving grip thermoplastic (PA6) and steel (1.0718).
H
Version:
Crank plastic powder coated, black.
H2
Thermoplastic black.
H3
D1
D H7
square socket
SW
407
K0998
Crank handles aluminium
with safety grip
Material:
H1
Sample order:
H3
K0998.1110
A
L Note:
Similar to DIN 469.
reamed hole
D2
D1
D H7
square socket
SW
408
K0999
Crank handles stainless steel
with revolving grip
Material:
Crank stainless steel 1.4308.
Axle pin stainless steel 1.4305.
Revolving grip stainless steel 1.4305.
Retaining ring stainless-steel 1.4310.
H1
Version:
Bright.
H
Sample order:
K0999.3110
H2
Note:
H3
reamed hole
D1
D2
D H7
square socket
SW
409
K0266
Crank handles
with fold-down grip
L1
L
Novo·Grip crank handles have standard centre
distances. These handles come with fold-down
grips, highly reinforced plastics and can be
mounted on round or square shafts. They can be
H
L2 Material:
reamed hole D H7 or Black grey thermoplastic.
square socket SW keyway DIN 6885-1
Version:
A
B3 P9 Steel parts black oxidised.
Sample order:
K0266.1108
Note:
B
DH7
410
K0659
Crank handles
with revolving grip
L1
Novo·Grip crank handles set the trend in all fields.
L
They combine sophisticated technology with easy
handling and universal application.
Material:
Black grey thermoplastic.
H
Version:
H1
L2
Steel parts black oxidised.
reamed hole D H7 or
square socket SW
Sample order:
K0659.3108
A keyway DIN 6885-1
B3 P9 Note:
The hub cap and the revolving grip are supplied loose.
To assemble the handle simply screw the grip into the
existing hole. Novo·Grip crank handles can be secured
to a shaft by using a transverse pin or by parallel key
B
H7
411
K0268
Crank handles
with safety grip
L1
Material:
Arm and grip black grey thermoplastic.
L
Version:
Steel parts black oxidised.
Sample order:
K0268.1108
H
H1
L2
Note:
The hub cover is supplied loose.
reamed hole D H7 or The crank handles can be secured to the shaft
square socket SW by cross-pinning or by parallel key together with
keyway DIN 6885-1
A a DIN 6912 socket head screw and DIN 7349
B3 P9 washer.
Two actions must be made to bring the safety grip
into an operating position:
- Swing the grip out until it stops (90°).
- Push the grip in until it locks.
B
DH7
412
K0728
Crank handles balanced
D4
L2
D H7 Material:
Steel.
H
Version:
galvanized.
D3 D1 D2 Sample order:
L L
K0728.108
Note:
Fixed handle DIN 39.
Notes
413
K0740
Cylindrical grips revolving
with hexagon socket
Material:
SW Grip thermoplastic.
Steel parts galvanized.
Version:
D3
D2
D1
Black satin finished.
D
Sample order:
K0740.08230620
L1 L
Note:
Cylindrical grips can be screwed onto our handwheels,
crank handles etc.
414
K0774
Cylindrical grips revolving
Material:
SW Grip thermoplastic.
Steel parts galvanized.
Version:
Black satin finished.
D2
D1
D
Sample order:
L1
K0774.08230600
L2 L Note:
Cylindrical grips can be screwed onto our handwheels,
crank handles etc.
415
K0775
Cylindrical grips fold-down
Material:
L1 Grip thermoplastic.
L Steel parts black oxidised.
Version:
Black satin finished.
Sample order:
K0775.10260890
Note:
Cylindrical grips can be screwed onto our handwheels,
L2
SW
L3
416
K1000
Cylindrical grips revolving
stainless steel
Material:
L1 L Axis stainless steel 1.4305.
Revolving grip stainless steel 1.4305.
Snap ring stainless-steel 1.4310.
D1
D2
D
Version:
Bright.
SW Sample order:
K1000.105
Assembly:
Screw in using hexagon socket in axis.
417
K0263
Cylindrical grips revolving
L1 L Version:
Steel parts black oxidised.
Sample order:
K0263.104
Note:
Cylindrical grips are supplied assembled and can be
screwed onto our handwheels, crank handles etc.
418
K0264
Cylindrical grips fold-down
Version:
Steel parts black oxidised.
Sample order:
K0264.104
H
Note:
Cylindrical grips are supplied assembled and can be
D
T
D1
A1 L
419
K0265
Cylindrical grips
safety automatic return
Sample order:
K0265.104
Note:
Two actions must be made to bring the safety grip
into an operating position:
H
A1 L
420
K0166
Machine handles fixed
steel, DIN 39 Form E
L1
Material:
L2 L3 Grip and screw steel.
Version:
Grip and screw galvanized and blue chromed.
D4
D3
D1
Sample order:
K0166.0616050
SW
Note:
Machine handle suitable for DIN 950 handwheels.
K0167
Machine handles fixed
aluminium, DIN 39 Form E
Material:
L1 Grip aluminium.
Screw steel.
L2 L3
Version:
Grip polished.
Screw black.
D4
D3
D1
Sample order:
K0167.0616050
SW
Note:
Machine handle suitable for DIN 950 handwheels.
421
K0168
Machine handles revolving
steel, DIN 98 Form E
Material:
L3 Grip and screw steel.
L2 L4
Version:
D3
D1
D4
K0168.0616055
Note:
SW L1 Machine handle suitable for DIN 950 handwheels.
K0169
Machine handles revolving
aluminium, DIN 98 Form E
Material:
Grip aluminium.
L3 Screw steel.
L2 L4
D6
Version:
Grip polished.
Axle part galvanized and blue chromed.
D3
D1
D4
Sample order:
K0169.0616055
SW
Note:
L1
Machine handle suitable for DIN 950 handwheels.
422
K0170
Taper grips revolving
Material:
L6 L5 Black Duroplast PF 31.
Axle and threaded bush galvanized steel or bright
stainless steel.
Version:
SW
D7
D8
High-gloss polished.
Sample order:
K0170.105007
L7 mounting aid D9
Note:
To mount unscrew the axle.
K0651
Taper grips revolving
oval
Material:
L1 L D3 Duroplast PF 31, black.
Axle steel, nickel-plated or bright stainless steel
1.4305.
Snap ring stainless steel 1.4310.
Version:
D2
D1
High-gloss polished.
Sample order:
K0651.106009
L2 SW
Note:
The grips are suitable for disc handwheels with
revolving taper grip K0164.
423
K0172
Taper grips
Material:
H Duroplast PF 31, black.
Bush and stud galvanized steel.
Form C
with moulded thread Version:
D1
D4
D3
High-gloss polished.
D
Sample order:
H1 K0172.106
T Note:
H2
The versions K0172.205 and K0172.206 have a brass
bush.
The versions K0172.208 and K0172.2081 have a
Form E copper-plated steel bush.
with threaded bush
D1
On request:
Other colours.
T1
Form F
with external thread
D2
424
K0173
Handwheel washers
Material:
90° Steel 1.0718.
D2 Stainless steel 1.4305.
Version:
S
D3 Sample order:
for countersunk screw K0173.00416
ISO 2009 and ISO 10642
Note:
These washers are screwed onto the end of a
shaft using DIN EN ISO 2009 or DIN EN ISO 10642
countersunk screws to secure handwheels and crank
handles with parallel key fastening option.
countersunk
screw ISO 2009
ISO 10642
shaft washer
handwheel
425
K0408
Position indicators
asse tion 1, 3
22
posi
mbly
12,7 20° torque support
Material:
Housing polyamide 6.
assembly
position 2, 4 Hollow shaft steel.
Screen plastic.
Ø6
18
Ø10 H7
Ø13,8
Ø16
Version:
Impact-resistant housing.
9,3
Note:
Position indicators allow direct reading of input
measurement values at a glance.
In addition, the value indicated per spindle rotation
(corresponding spindle pitch) can be selected and
1 2 3 4 the various indicator values can be operated by
e. g. K0408.01001111
a transmission gear. The position indicators are
e. g. K0408.01001111
0100 = 1mm increments = assembly position 1 distinguished by their small construction with very
1 = decimal places clear display.
They are especially suitable for small spindle distances
and small shaft diameters and they have a torque
Count direction (1 - 2): Colour (1 - 2):
support that is located in a drillhole on the other side.
426
K0409
Position indicators
asse tion 1, 3
posi
5 torque support
mbly
33
20°
assembly
position 2, 4
Ø6
22
47
Ø14 H7
Ø19,7
Material:
Housing polyamide 6.
16,5
1 2 3 4 Note:
e. g. K0409.01002111 e. g. K0409.01002111 Position indicators allow direct reading of input
0100 = 1 mm increments = assembly position 1 measurement values at a glance.
2 = decimal places In addition, the value indicated per spindle rotation
(corresponding spindle pitch) can be selected and
Count direction (1 - 2): Colour (1 - 2):
the various indicator values can be operated by
a transmission gear. The position indicators are
distinguished by their small construction with very
1 clear display and fine scale.
They are especially suitable for small spindle distances
2 1 and small shaft diameters and they have a torque
2 support that is located in a drillhole on the other side.
427
K0410
Position indicators
asse tion 1, 3
posi
6 torque support
mbly
48
20°
Ø6
assembly
position 2, 4
30
67,5
Material:
Ø20 H7
Ø27
Ø40
Housing polyamide 6.
Hollow shaft steel.
25,5
Screen plastic.
3,5 Grub screw steel.
2 seal
grub screw M5 30 2 Version:
Impact-resistant housing.
38,5 Hollow shaft black oxidised.
Grub screw black.
Dial black, digits white.
428
K0411
Position indicators
freely programmable
22,5 4,5
fitting
48 length torque support
45°
Material:
Housing plastic.
Hollow shaft steel.
Ø6
30
Ø30 H7
Version:
29
429
K0771
Position indicators
freely programmable
Material:
grub screw M4 18,3 Housing plastic.
fitting Hollow shaft steel.
33 length 3,5 torque support Screen LCD display.
3
45° Grub screw steel.
Version:
Hollow shaft black oxidised.
Grub screw black.
Ø6
22
Ø14 H7
52
K0771-12
21,5
430
Sample order for programmed position indicators
K0411 and K0771
Order code:
K0411. _ _ _ _ _ _ _ _ _ _
Indicator after Decimal point position: Assembly position: Count direction: Colour: Zero-point position:
one rotation:
2 1
Angle mode: Angle mode: The Zero-point position
(resolution 0.1°) If you want the display to can be delayed by 5 sec.
If you want the display to be in angle mode, the by means of a parameter,
be in angle mode, enter decimal point is best put in
1 in order to avoid accidental
03600. position 1. zero setting.
431
K0412
Reducing bushings
A
D2
Material:
Steel.
Ø D1 H7
Ø D f7 Version:
Black oxidised.
Sample order:
L K0412.1408 (diameter D1=8)
Note:
Reducing bushes are used for adapting the diameter
between position indicator and positioning spindle.
K0413
Intermediate plates
K0413.041 K0413.091
5 6
Ø6
Ø6
Material:
30
22
67,5
47
Plastic
Ø40 H9
Ø28
Ø30
Sample order:
16,5
25,5
K0413.041
Note:
12
Intermediate plates are used for mounting shaft collars
14
and radial shaft seals.
15
432
K0414
Mounting brackets
L
A ±0,1
= = view X-X
B ±0.3 Material:
X B1 Housing aluminium
Ø D3 +0,2
6,2
Ø D2 +0,2
+0,3
Clamping lever plastic.
Version:
Housing anodized.
D +0,
A4 ±0,1
A2 ±0,1
06
Sample order:
H
K0414.09121
D1
A3
Note:
H1
A1 ~30
Mounting position
433
434