Professional Documents
Culture Documents
Creat de:
Telefon:
Date: 18.04.2020
Cant. Descriere
1 ALPHA1 L 25-40 180
Grundfos ALPHA1 L 25-40 180 is a high-efficiency circulator pump with permanent-magnet motor (ECM
technology).
The pump features three control modes; radiator heating mode, underfloor heating mode and constant
curve/constant speed.
Furthermore, the speed can be controlled by a low-voltage PWM (Pulse Width Modulation) signal.
The pump has a ceramic shaft and radial bearings, carbon thrust bearing, stainless-steel rotor can, bearing plate
and rotor cladding, composite impeller, all of which contribute to long life, and the pump is self-venting, which
contributes to easy commissioning as well as simple selection of control mode.
The compact design featuring pump head with integrated control box and control panel fits into most common
installations as well as boilers.
The pump and motor form an integral unit without shaft seal. The pump is of the wet-runner design. This means
the bearings are lubricated by the pumped liquid. These constructions ensure maintenance-free operation.
The pump housing is made of cast iron and is electrocoated to improve the corrosion resistance.
The motor is a synchronous permanent-magnet rotor/compact-stator motor. The pump controller is incorporated
in the control box, which is fitted to the stator housing and connected to the stator via a terminal plug.
Features ALPHA1 L
• Three constant curves/constant speed.
• Radiator heating mode.
• Underfloor heating mode.
• PWM profile for heating applications (profile A). The PWM signal is a method for generating an analog signal
using a digital source.
• Energy-optimised, complies with the ErP directive
• Unblocking screw, accessible from the front of the control box.
• Runs reliably and efficiently under even the most demanding conditions
• Adjustable and flexible installer plug, with two possible cable gland positions.
Lichid:
Lichid pompat: Apă incălzire
Gama temperaturii lichidului: 2 .. 95 °C
Densitate: 983.2 kg/m³
Tehnic:
Debitul curent calculat: 0.052 m³/h
Înălţimea de pompare rezultată pentru pompă: 4.397 m
Clasa TF: 95
Aprobări pe etichetă: CE,VDE,EAC
Date: 18.04.2020
Cant. Descriere
Materiale:
Corpul pompei (stator): Fontă
EN 1561 EN-GJL-150
Corpul pompei: ASTM A48-150B
Rotor: Compozit/PES 30 % GF
Instalaţie:
Gama temperaturii ambientale: 0 .. 55 °C
Presiune de funcţionare maximă: 10 bar
Conexiune conductă: G 1 1/2
Evaluare presiune: PN 10
Distanţa dintre porturi: 180 mm
Date electrice:
Putere de introdusă - P1: 4 .. 25 W
Frecvenţa reţelei electrice: 50 / 60 Hz
Tensiune nominală: 1 x 230 V
Curent consumat maxim: 0.05 .. 0.26 A
Grad de protecţie (IEC 34-5): X4D
Clasă de izolare (IEC 85): F
Altele:
Energie (EEI): 0.20
Greutate netă: 2.1 kg
Greutate brută: 2.2 kg
Volum de livrare: 0.004 m³
Țara de origine: DK
Nr. tarif: 84137030
Date: 18.04.2020
4.5
4.0
3.5 70
3.0 60
2.5 50
2.0 40
1.5 30
1.0 20
0.5 10
26
24
22
20
18
16
14
12
10
8
6
4
2
P1 = 17.43 W
0
Date: 18.04.2020
H ALPHA1 L 25-40 180, 1*230 V eta
Descriere Valori şi tipuri [m] [%]
Q = 0.052 m³/h
Informații generale: H = 4.397 m
Nume produs:: ALPHA1 L 25-40 180 Lichid pompat = Apă incălzire
4.5 Densitate = 983.2 kg/m³
Nr. produs:: 99160579
Numãrul EAN:: 5712607862633
4.0
5712607862633
Preţ: 137,39 EUR
3.5 70
Tehnic:
Debitul curent calculat: 0.052 m³/h 3.0 60
Înălţimea de pompare rezultată pentru
pompă: 4.397 m
2.5 50
Înălţime de pompare max.: 40 dm
Clasa TF: 95 2.0 40
Aprobări pe etichetă: CE,VDE,EAC
Model: C 1.5 30
Materiale:
1.0 20
Corpul pompei (stator): Fontă
EN 1561 EN-GJL-150
0.5 10
Corpul pompei: ASTM A48-150B
Compozit/PES 30 % Eta pompă+motor+convertizor de frecvenţă = 3.5 %
Rotor: 0.0 0
GF 0 0,5 1,0 1,5 2,0 2,5 Q [m³/h]
Instalaţie: P1
[W]
Gama temperaturii ambientale: 0 .. 55 °C 25
Presiune de funcţionare maximă: 10 bar
Conexiune conductă: G 1 1/2 20
Evaluare presiune: PN 10
Distanţa dintre porturi: 180 mm 15
Lichid:
10
Lichid pompat: Apă incălzire
Gama temperaturii lichidului: 2 .. 95 °C 5
Densitate: 983.2 kg/m³
P1 = 17.43 W
Date electrice: 0
Putere de introdusă - P1: 4 .. 25 W
Frecvenţa reţelei electrice: 50 / 60 Hz
Tensiune nominală: 1 x 230 V
Curent consumat maxim: 0.05 .. 0.26 A
Grad de protecţie (IEC 34-5): X4D
Clasă de izolare (IEC 85): F
Protecție motor: FĂRĂ
Protecţie termică: ELEC
Control:
Poziţia cutiei cu conexiuni: 6H
Altele:
Energie (EEI): 0.20
Greutate netă: 2.1 kg
Greutate brută: 2.2 kg
Volum de livrare: 0.004 m³
Țara de origine: DK
Nr. tarif: 84137030
Date: 18.04.2020
Configurare 2.5 50
Alegeţi Tipul de Hidraulică Paralel
Număr total de pompe 1 2.0 40
Design pompă
1.5 30
Material pompă Fontă sau oțel inox
Condiţii de Funcţionare 1.0 20
Frecvenţă 50 Hz
0.5 10
Fază 1 sau 3
Putere motor limitată pentru pornire 5.5 kW Eta pompă+motor+convertizor de frecvenţă = 3.5 %
0.0 0
stea-triunghi 0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4 2,6 Q [m³/h]
Tensiune 1 x 230 sau 3 x 400 P1
[W]
V
25
Temparatura ambientului 20 °C
20
Costul ciclului de viata
Inclusiv economii în recuperarea energiei Nu
15
1 2 3 4
Debit 100 75 50 25 %
Înălţime de pompare 110 110 110 110 %
P1 0.017 0.017 0.017 0.017 kW
Eta total 3.4 2.5 1.7 0.9 %
Timp 410 1026 2394 3010 h/a
Consum de energie 7 18 41 51 kWh/An
Cantitate 1 1 1 1