Professional Documents
Culture Documents
Page 1 from 4
1. Information
Page 2 from 4
3. Heat exchanger
Reflex Longtherm
brazed one-way heat exchanger from stainless steel (1.4404) with copper solder
vacuum-soldered. Sizes R..B-14 to R..B-110 with threaded connection, R..B-235
with DIN flanged connection.Approval according to Pressure Equipment Directive
2014/68/EC. With CE mark.
Type RLB-110-30
Number of plates 30
Plate thickness 0.30 mm
Volume primary side (k2/k3) 2.30 l
Volume secondary side (k4/k1) 2.30 l
Plate material AISI 316L
Sealing material copper
Max. perm. operating temperature 230 °C
Max. perm. operating pressure 25 bar
Connection AG 2 1/2"
Connection material AISI 316L
Connection variant Pipe with thread
Height 466 mm
Height k2-k3/k4-k1 378 mm
Width 258 mm
Width primary-secondary 170 mm
Depth 84 mm
Weight 20.96 kg
Capacity 75 kW
Inlet temperature k2/k3 35.0 °C
Outlet temperature k2/k3 40.0 °C
Inlet temperature k4/k1 60.0 °C
Outlet temperature k4/k1 50.0 °C
Liquid k2/k3 water
Liquid k4/k1 water
Volume flow k2/k3 12.98 m³/h
Volume flow k4/k1 6.55 m³/h
Pressure loss k2/k3 20.00 kPa
Pressure loss k4/k1 20.00 kPa
Heat exchanger surface 3.3 m²
Pollution factor 0.534 m²K/kW
k-value clean 4198.9 W/m²K
k-value dirty 1294.7 W/m²K
Oversize 224.3 %
Calculated pressure losses k2/k3 // 5.87 kPa / 19.86 kPa
k4/k1
Connections Pressure losses k2/ 0.01 kPa / 0.03 kPa
k3 // k4/k1
Internal volume flow k2/k3 // k4/k1 6.55 m³/h / 12.95 m³/h
Internal flow rate k2/k3 // k4/k1 0.3 m/s / 0.5 m/s
Page 3 from 4
3. Heat exchanger
Longtherm RLB-110-30
Reflex Longtherm
Threaded fitting with brass threaded end and brass union nut in a set (2 pieces), for
on-site installation.
Type R_B-110
Inlet connection G 2 1/2"
Outlet connection R 2"
Depth 66 mm
Weight 1.00 kg
Reflex Longtherm
Threaded fitting with steel welding end and brass union nut in a set (2 pieces), for on-
site installation.
Type R_B-110
Inlet connection G 2 1/2"
Diameter 60 mm
Depth 50 mm
Weight 1.00 kg
Reflex Longtherm
Standing support and lifting eyes in a stainless steel set. Comprising two standing
feet and two eyes, which are fitted on site on the front and back plate.
Type R_B-110
Height 70 mm
Width 240 mm
Depth 320 mm
Page 4 from 4
3. Heat exchanger
Weight 2.96 kg
Type R_B-110-30
Colour black
Insulation material
Outer material
Insulation strength 25 mm
Max. perm. operating temperature 110 °C
Height 184 mm
Width 322 mm
Depth 530 mm
Weight 0.40 kg