Professional Documents
Culture Documents
List of Approved Makes - As Per Contract
List of Approved Makes - As Per Contract
Doors:
Main Doors / Internal Doors Red Miranti door frames (125 x 65)
Door Jamb and Soffit in Bath/WC Granite
Door Fixtures:
Main door Night Latch, D type Handle, Tower bolt,
Main Door: (heavy duty ISI marked
Aldrop, Door eye, Magnetic door Holder, Safety Chain,
dyed aluminium fixtures & fittings)
Hinges
Internal Door: (heavy duty ISI Mortise Latch with lever handle, Tower bolt, Magnetic
marked dyed aluminium fixtures & door Holder, Hinges
fittings)
Mortise Latch with lever handle, Tower bolt, Magnetic
Doors in Bath / WC
door Holder, Hinges
Painting:
One coat of cement primer and 2 coats of Oil Bound
Internal surfaces: Distemper
Two coats of synthetic enamel paint over a coat of wood
Doors: primer on door frame and edges of shutter over beeding
patti.
Bath One light point, one 16 Amp. Socket point, exhaust fan
A3 Plastering Works
(i) Readimix Plaster
(ii) Cement Based Wall Putty
A4 Flooring / Paving
(i) Tiles
(ii) Ceramic Tiles
c) For use of material from a BIS listed / certified manufacturer, the Contractor shall furnish a copy of the valid BIS certificate t
d) In case of non-availability of any item / material among approved manufacturers / brands, alternate manufacturers / brand
proposed along with required credentials for MHADA’s approval.
e) MHADA / PMC reserves the right to accept/reject any new brand(s) proposed by the Contractor.
f) Samples of all materials, fittings etc. to be incorporated in the work shall be submitted by the Contractor and got it approved
Wherever particular make or its equivalent is mentioned in the item schedule, the decision of the PMC in selection of particula
the Contractor. The approved samples will be kept in custody of the PMC till completion of the work. Materials not conformin
List of Approved Materials
Recommended Make / Manufacturers
Vyara / Dazzle / Basant Beton / Green Concrete / Techno Concrete / Conwood / Automatic / Super Tiles
ufacturers, who are in the market for the last three years with valid I.S. License, shall be considered for approval. Only
the Contractor shall furnish a copy of the valid BIS certificate to the MHADA before procuring the material.
oved manufacturers / brands, alternate manufacturers / brands conforming to BIS / BS equivalent etc. shall be
l.
and(s) proposed by the Contractor.
work shall be submitted by the Contractor and got it approved from the PMC, before supply in bulk at site of work.
item schedule, the decision of the PMC in selection of particular make or its equivalent shall be final and binding on
the PMC till completion of the work. Materials not conforming strictly to the approved samples will be rejected.