Professional Documents
Culture Documents
BE
Interactive Practical Electronics System – I.P.E.S.
It consists of a set of components and circuits for performing
(DC, SYNCHRONOUS AND experiments.
STEPPER MOTOR) The lessons included in this module can be developed in:
- Standard mode: using the switches of the equipment and
consulting the handbook;
-Computerized mode: the interactive software version of
the handbook - SW-D-MCM13/EV - interfaced to the module
via Control Unit SIS3-U/EV, is used. This software inserts circuit
variations and faults automatically enabling the development
of lessons even without teacher’s assistance.
MCM13/EV
Experiment Board for analysis of DC, synchronous and stepper
motors. It contains all the pre-assembled electronic components
needed to construct the experiment circuits and divided into
functional circuit blocks which can be interconnected and
modified by means of supplied jumpers and connection cables.
TRAINING PROGRAM:
ELECTRONICS AND SYSTEMS
TECHNICAL SPECIFICATIONS:
• Printed circuit board with protective treatment and mimic
diagram
REQUIRED
• 2 mm sockets for test points and connections
• Jumpers for quick circuit modification PSLC/EV POWER SUPPLY
POWER SUPPLY UNIT ±12 Vdc – 0.5A
• 37-pin connector for Interface Control Unit SIS3-U/EV
- NOT INCLUDED -
• 8-pole female DIN connector for Power Supply Unit PSLC/EV +5 Vdc – 2A
• Fault simulation
OPTIONAL
20B-E-BE-MCM13-0
PERSONAL COMPUTER
ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com BE 65