Professional Documents
Culture Documents
2. 13.5 Requirements given in this Clause are in Requirements given in this Clause are in
(Page 136) addition to those given in Clause 16.11 addition to those given in Clause 16.14
3. 15.2.6.1 (4) When large bars are used, adequate crack When large bars are used, adequate crack
4.
(Page 159)
15.11
(Page 166)
12.
C
control shall be ensured either by using
surface reinforcement as per Clause
16.2.4.2, or by calculation as per Section
control shall be ensured either by using
surface reinforcement as per Clause
16.5.4 (4), or by calculation as per
Section 12.
fctd (t) is the design tensile strength at time fctd (t) is the design tensile strength at time
of release ‘t’ (Refer Clause 6.4.3.3) taken of release ‘t’ (Refer Clause 6.4.2.3) taken
as 0.7 ftm (t)/γc as 0.7 fctm (t)/γc
IR
5. 16.7.1 (3)
(Page 185) ac < 0.5 hc ac ≤ 0.5 hc
16.7.1 (4)
(Page 185) In corbels with ac > hc In corbels with ac > 0.5 hc
As Amended: