Professional Documents
Culture Documents
17 02 2017 14 11 23 3100494 PDF
17 02 2017 14 11 23 3100494 PDF
To: ______________________________________________________________________________
Work/Project: _________________________________________________________________________
Type of sample: Concrete Cubes/Concrete Cylinders/Bricks/Cores/Tuff Tiles/Pavers
Specimens received on: 00-00-17 Tested on: 00-00-17 Sample condition (Dry/Wet)
Reference: CIIT/Sahiwal/Civil/MT-lab/2017/ Date: 00-00-2017
- BS-3921 standard requires the average of ten clay brick samples for crushing strength and water absorption.
- BS-5328 standard requires the mean of two cube sample strength at 28 days as characteristic strength.
- ACI 318-08 standard requires mean of two sample (6"diax12" cylinder) strength at 28 days as compressive strength.
Note: Test results refer to the supplied samples only. The Department/laboratory is not
responsible for the sampling, originality and on site conditions (Mix proportion, W/C ratio,
compaction, curing and quality of ingredients). The test results are recommended to be
interpreted in the light of above factors by the engineer.