Professional Documents
Culture Documents
MENU
SPONSORED SEARCHES
well control school prices drilling rig volume calculator
Post Views:692
Kick penetration is one of the most critical concerns for stripping operation because a kick height will change due to change of hole geometry. In this this
article, we will describe about this situation.
This is will be happened when the string penetrates the kick.Height of influx will increase when the drillstring penetrates a kick; therefore, hydrostatic
pressure decreases and casing pressure increases in order to compensate this situation.
If the casing is maintained constant while penetrating the kick, you will have high chance to take more influx because of underbalance situation (Figure
1). This article will teach you about how to determine pressure increment while penetrating into the kick, what to look for, etc.
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 1/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
Figure 1 – Height of Influx increases when the drillstring penetrates into it.
However, if the constant surface pressure is utilized for the stripping operation, you must account for pressure increment due to height of influx change.
The equation below is for calculating the increase in casing pressure.
Hole TD = 12,000’MD/12,000’TVD
Drill pipe = 5”
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 2/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
Hole and 6.5” drill collar capacity = (11.752 -6.52) ÷ 1029.4 = 0.0931 bbl/ft
∆CP = 37 psi
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 3/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
The increase in casing pressure required for this scenario is 37 psi. This figure tells you that you need to let casing pressure increase by 37 psi in order
to compensate to hydrostatic loss.
Practically, you should have the safety factor which is greater than casing pressure increase required for kick penetration and for this case, the safety
factor must be more than 37 psi. This will prevent the underbalance situation when the influx is penetrated and you don’t need to worry about the time
when the influx penetration will actually happens.
For gas kick, it is impossible to use either the constant pressure method or the volume accounting method because gas will migrate. You must have the
method to control the bottom hole pressure and deal with increase in surface pressure due to gas migration. For gas kick, the volumetric control stripping
technique must be used. This technique will account for volume of pipe bled back and surface pressure increase. We will discuss this technique
separately in a next topic.
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 4/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
0
Shares
Tagged off bottom kill, pipe off bottom, Well Control. Bookmark the permalink.
About DrillingFormulas.Com
Working in the oil field and loving to share knowledge.
View all posts by DrillingFormulas.Com →
« Excellent Rig Component Illustration Definitions of Various Offshore Drilling Rig Types and Generations »
I am not sure what you are trying to prove with this article. In one place you talk about drilling into a kick, then stripping operations, then
mud weight safety factor. All your math is correct, it is just the problem with what you are trying to present.
As I am sure you are well aware of is the standard response of the drilling crew when you encounter a reverse drilling break. And that is to
stop drilling, check for flow, if there is flow shut-in and record all information. Then make the decision to either circulate out the kick or drill
ahead.
Reply
Thank you for the thought and provision of this web pages.
Its so good to find it. Many thanks to this group of people.
Reply
Leave a reply
Comment
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 5/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
Name *
Email *
Website
Post Comment
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Categories
Select Category
email address
Click Here
Search on Drillingformulas.com
Search
Custom Search
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 6/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
Drillingformulas.com on Facebook
Drillingformulas.…
344 K mentions J’aime
2 amis aiment ça
OilfieldPix.com
Oilfield Acronyms
Recent Comments
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 7/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
DrillingFormulas.Com on What are differences between Full Opening Safety Valve (TIW valve) and Inside BOP valve (Gray Valve)?
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 8/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 9/10
06/05/2020 Kick Penetration For Stripping Operation - Drilling Formulas and Drilling Calculations
www.drillingformulas.com/kick-penetration-for-stripping-operation/ 10/10