Professional Documents
Culture Documents
Options
• Stainless steel- add “SS” to model number (304 SS)
• “T” handle
SAE Straight Thread
• 1/4", 3/8", 1/2" SAE ports available (consult factory) "T" Handle Tapered Pipe Thread
• Viton Seals
J
accumulates. It is especially needed when starting up a hydrau-
B
lic system.
It is easily installed. Please make sure when installing Lenz
bleed valve to position the vent opening away from operating
C
personnel. Always open the bleed valve slowly, some weepage
will occur when the valve is opened.
T
ABV Dimensional Detail A
OVERALL
BODY HEIGHT BODY CENTER
T PORT HEX CLOSED HEIGHT CAP HEX TO VENT OPEN T HANDLE HANDLE
MODEL THREAD A B C H J HEIGHT WIDTH DIA
1/8" NPT IN 0.68 1.66 1.26 0.56 0.56 1.79 1.79 0.25
2-ABV
MM 17.2 42.1 32.0 14.0 14.0 45.4 45.4 6.4
1/4" NPT IN 0.68 1.80 1.40 0.56 0.56 2.05 1.79 0.25
4-ABV
MM 17.2 46 35.5 14.0 14.0 52.0 45.4 6.4
3/8" NPT IN 0.68 1.80 1.41 0.56 0.56 2.05 1.79 0.25
6-ABV
MM 17.2 45.7 35.8 14.0 14.2 52.0 45.4 6.4
1/2" NPT IN 0.88 1.86 1.44 0.56 0.57 2.05 1.79 0.25
8-ABV
MM 22.3 47.2 36.5 14 14.4 52 45.4 6.4
7/16"-20 SAE IN 0.69 1.82 1.31 0.56 0.5 1.84 1.79 0.25
A-4ABV
MM 17.5 46 33.3 14.0 12.7 46.7 45.4 6.4
9/16"-18 SAE IN 0.69 1.66 1.24 0.56 0.55 1.97 1.79 0.25
A-6ABV
MM 17.5 42 32 14 13.9 50 45.4 6.4
3/4"-16 SAE IN 0.88 1.86 1.13 0.56 0.54 1.76 1.79 0.25
A-8ABV
MM 22.3 46 28.7 14 13.7 44.7 45.4 6.4
Ordering Code
A — 4ABV — SS