Professional Documents
Culture Documents
SEC. - PAGE
Automatic transfer switch controllers for 2 power sources
ATL 100 type modular version for controlling 2 power sources with single phase control ...................................... 26 - 6
ATL 600 and ATL 601 type non expandable for controlling 2 power sources............................................................ 26 - 6
ATL 610 type expandable with EXP modules for controlling 2 power sources ......................................................... 26 - 6
ATL 800 type expandable with EXP modules for controlling 2 power sources and 1 tie breaker ............................. 26 - 7
Automatic transfer switch controllers for 3 power sources
ATL 900 type expandable with EXP modules for controlling 3 power sources and 2 tie breakers ........................... 26 - 8
Enclosed automatic transfer switches ATS
ATP series with ATL 600 automatic transfer switch controller and contactors ........................................................ 26 - 9
Accessories
Dual power supply module ....................................................................................................................................... 26 - 10
Communication devices, software and accessories ................................................................................................. 26 - 11
Dimensions ............................................................................................................ 26 - 12
Wiring diagrams ...................................................................................................... 26 - 13
Technical characteristics ............................................................................................ 26 - 16
26
Page 26-10
ATL DPS1
• Module specifically designed to control
power supply voltage of motorised circuit
breakers and changeover switches
• Continuous monitoring of supply line status
• Management via microcontroller
management.
26 Automatic transfer switch controllers
ATL series
ATL 100 ATL 600 - ATL 601 ATL 610 ATL 800 ATL 900
POWER SUPPLY
Rated DC supply voltage –– 12/24VDC (ATL 601) 12/24VDC 12/24/48VDC 12/24/48VDC
Rated AC supply voltage 110...230VAC 110...240VAC (ATL 600) 110...240VAC 110...240VAC 110...240VAC
Frequency 45...66Hz 45...66Hz 45...66Hz 45...66Hz 45...66Hz
FRONT PANEL / HOUSING
Backlit display –– LCD graphic 128x80 pixel LCD graphic 128x80 pixel LCD graphic 128x80 pixel LCD graphic 128x112 pixel
Languages –– 5 5 8 8
Size Modular housing (3U) 144x144x52.2mm/ 144x144x52.2mm/ 240x180x45mm/ 240x180x45mm/
5.67x5.67x2.05” 5.67x5.67x2.05” 9.45x7.09x1.77” 9.45x7.09x1.77”
Degree of protection IP40 on front / IP40 / optional IP65 IP40 / optional IP65 IP65 IP65
IP20 terminals
Expandable with EXP series modules –– –– 2 modules 3 modules 3 modules
VOLTAGE AND CURRENT MEASUREMENT INPUT
Power sources that can be controlled –– 2 2 2 3
Voltage inputs per line 1 phases + neutral 3 phases + neutral 3 phases + neutral 3 phases + neutral 3 phases + neutral
Rated voltage Ue 110...230VAC 480VAC 480VAC 600VAC 600VAC
Current inputs –– –– –– –– 4 (by 5A or 1A CTs)
Frequency range 45…65Hz 45…65Hz 45…65Hz 45…65Hz 45…65Hz
BUILT-IN DIGITAL INPUTS AND OUTPUTS
Number of inputs –– 6 6 8 12
Number of outputs 3 7 7 7 11
Contact configuration 3 NO 6 NO + 1 changeover 6 NO + 1 changeover 4 NO + 3 changeover 6 NO + 4 changeover +
1 SSR
INTERFACE
Programming with NFC technology –– –– ––
Front optical USB communication port –– with CX 01 with CX 01 with CX 01 with CX 01
Front optical Wi-Fi communication port –– with CX 02 with CX 02 with CX 02 with CX 02
USB communication –– –– EXP10 10 EXP10 10 EXP10 10
RS232 communication –– –– EXP10 11 EXP10 11 EXP10 11
RS485 communication –– –– EXP10 12 (built-in) (built-in)
Ethernet communication –– –– EXP10 13 EXP10 13 EXP10 13
Profibus communication –– –– EXP10 14 EXP10 14 EXP10 14
Communication via modem –– –– –– EXP10 15 EXP10 15
FUNCTIONS
Number of tie breakers that can be managed –– –– –– 1 2
Programmable source type (utility or generation) ––
Closed transition –– –– ––
Non-priority load management –– –– ––
Switching management with power thresholds –– –– –– ––
PLC logic –– –– ––
Timers –– –– ––
System layout available on display –– –– –– 6 14
Custom system layouts –– –– ––
User alarms ––
Limits ––
Event logging –– 100 100 250 250
Real time clock with backup reserve energy –– ––
Acoustic alarms –– –– ––
Analogue inputs –– –– –– EXP10 04 EXP10 04
Analogue outputs –– –– –– EXP10 05 EXP10 05
Accessory for alarm remoting –– –– –– –– RGK RR
26-2
26 Automatic transfer switch controllers
For 2 power sources
ATL 600 - ATL 601 - ATL 610
NON-STOP CONTROL!
BACKLIT GRAPHIC
LCD DISPLAY
128x80 pixel, with excellent
legibility with adjustable
brightness and display of
events, alarms and
measurements in 5
languages: English, Italian,
French, Spanish and
German.
OPTICAL COMMUNICATION
PORT
The optical port on the front, using a standard
USB or Wi-Fi point, permits to communication
with a PC, smartphone and tablet, to carry out
programming, diagnostics and data download
without removing power to the electric panel.
26-3
26 Automatic transfer switch controllers
For 2 and 3 power sources
ATL 800 - ATL 900
VERSATILE CONFIGURATION
ATL
A
AT L 800
Management of 2 energy sources and 1 tie breaker.
6 preconfigured
preconfigur system layouts.
Non-priority load
l management.
Management of transition with brief parallel configuration.
RS485 built in.
in
Built-in NFC technology
t for parameter settings with
APP .
App and software:
soft
f , , , , .
GRAPHIC LCD AND 8-LANGUAGE INPUTS, OUTPUTS, INTERNAL STATISTICS AND EVENTS PROGRAMMABLE PLC LOGIC
TEXT VARIABLES, COUNTERS The statistical data recorded by the With the built-in PLC functions, new
The backlit graphic display simplifies The input and output functions are transfer switch controller is switching logic can be defined
the user interface and permits good preconfigured with the most available to the user for analysing through appropriate combinations
visibility in environments with poor frequently used settings; the user the performance of the switching of input, output and internal variable
lighting. For ATL 800 and ATL 900 can easily modify the predefined system. A cyclical internal memory signals.
the texts are available in 8 configuration and adapt the switch records up to 250 events, providing
languages: English, Italian, French, to their application requirements. useful information on the history of
Spanish, German, Portuguese, All the inputs and outputs can be the system controlled. TIMER
Polish and Russian. configured. There are various types 8 timer variables are available for
The new interface allows the user to of programmable internal variables: use in the system’s PLC logic, in
see, clearly and simply: - Limit thresholds BUILT-IN CALENDAR CLOCK combination with the outputs or
- System status - Remote control variables A built-in calendar clock with user alarms. Each timer variable has
- Measurements - User alarms backup reserve energy permits each an input variable that controls it.
- Statistical data - Programmable counters event to be identified using the time When this variable changes state,
- Threshold control - Timer. and date on which it occurred. so does the timer variable, but it
- Alarm pop-up windows. The limit, counter and enabled timer remains in the new state only for the
statuses are available for display on time specified then returns
dedicated pages. automatically to the starting
BUILT-IN RS485 COMMUNICATION
condition.
Thanks to the built-in RS485
communication port, ATL 800 and
ATL 900 are already set up for NFC CONNECTION
remote supervision and control. Programming the parameters via
In addition to this communication tablet and smartphone is now
port, the user can install two further possible also through NFC wireless
types of communication from those technology.
available in the EXP… expansion Bringing a smartphone or tablet
MAINTENANCE COUNTERS modules. with NFC connection enabled close
Two counters can be used for to the display of the ATL 800-900
scheduling maintenance on the activates the APP and the
transfer systems installed: the first DUAL AC/DC SUPPLY switch connected is recognised
for recording the operating time and ATL switches can deal with all automatically. It will then be
the second for monitoring the supply solutions demanded by the possible to modify the parameters
number of switching operations. market. The best and safest solution and program the ATL.
Exceeding the limit set on the is the simultaneous use of AC and
counters activates the DC supply. The switches can then
corresponding alarm. be supplied by the AC line available USB AND WI-FI COMMUNICATION
and, during switching, in the INTERFACES
absence of the AC line, the switch ATL 800 and ATL 900 feature a front
will be supplied by the battery via optical port for programming via
HIGH PROTECTION RATING the DC inputs. Non-stop control! optional USB (CX 01) or Wi-Fi
The controller front and the frame AC supply ensures supply during (CX 02) communication interface.
seal have been designed to warrant system monitoring and DC supply Advantages:
an IP65 protection degree. guarantees constant supply during - Not necessary to disconnect the
switching. supply from the panel to connect
to the switch
- Electrical safety (no physical
connection)
- Convenience of operating on the
front.
26-4
26 Automatic transfer switch controllers
For 2 and 3 power sources
ATL 800 - ATL 900
ATL 900: management of three sources and two tie breakers EXPANDABILITY
A single transfer switch controller can ATL 800 and ATL 900 functionality
be used to manage applications which can be extended thanks to the
in the past required several transfer EXP… series expansion modules.
switch controllers in a cascade Three expansion slots are available,
connection. and while the switch is restarting
24 system layouts are available. the modules are recognised and
configured entirely automatically.
4 current inputs The following EXP… modules are
The current inputs permit the available:
monitoring of the demand load and - Digital I/O modules EXP10...
defining of the correct switching - Analogue I/O modules
strategy. Knowing the power demanded - USB, RS232, RS485, Ethernet and
by the system and the rated power of Profibus communication modules
the sources, ATL900 can select the best - GPRS/GSM modem.
Since the additional modules are
source available that can supply the
loads correctly. shared with other LOVATO Electric 26
products, it is possible to save in
management costs, guaranteeing
flexibility and ease of installation,
above all when the system has
already been commissioned.
MAX
3
26-5
26 Automatic transfer switch controllers
For 2 power sources
Non expandable Order code Description Qty Wt General characteristics ATL 100
per ATL 100 is a single phase automatic transfer switch controller in
pkg modular housing. It monitors 2 single phase voltage inputs and it
connects to the output the line that is within the limits.
n° [kg] The priority line is the line 1. The 2 outputs can control contactors
ATL 100 Automatic transfer switch 1 0.300 or motorized changeover switches to perform the transfer
controller for 2 power between the lines.
sources with single phase
control, modular housing, Operational characteristics ATL 100
110…230VAC supply – Self-powered
ATL 600 Automatic transfer switch 1 0.600 – Input voltage range: 80…300VAC
ATL 100 – Frequency range: 45…66Hz
controller with LCD display and
optical port for 2 power sources – 2 relay outputs with 1 NO contact 4A 250VAC
with three phase control – 1 relay output with 1 NO contact 3A 250VAC
(144x144mm/5.7x5.7”),
110...240VAC supply General characteristics ATL 600 - ATL 601 - ATL 610
The automatic transfer switch controllers ATL 600 / ATL 601 /
ATL 601 Automatic transfer switch 1 0.600 ATL 610 are used for the automatic or manual switching of the
controller with LCD display and load from the MAIN LINE to a stand-by or emergency SECONDARY
new optical port for 2 power sources
with three phase control
LINE and vice versa. They have two outputs for the “automatic”
and/or “manual” control of contactors or motorised circuit
(144x144mm/5.7x5.7”), breakers and switches.
12/24VDC supply The main features are:
– Supply input
• Single in AC for ATL 600
ATL 600 • Single in DC for ATL 601
• Dual in AC and DC for ATL 610
– Measurement inputs for three phase + neutral voltage values;
Expandable with Order code Description Qty Wt also suitable for 1 and 2 phase lines
per – 128x80 backlit graphic LCD to view measurements, events
EXP… modules pkg and alarms in 5 languages (English, Italian, French, Spanish
and German)
n° [kg] – 2 status indication LEDs
ATL 610 Automatic transfer switch 1 0.680 – 6 programmable digital inputs
controller with LCD display and – 7 programmable relay outputs
optical port for 2 power sources – Viewing of L-L and L-N voltage values of the controlled lines
with three phase control – Status viewing of contactor or motorised circuit breakers and
(144x144mm/5.7x5.7”), switches
110...240VAC supply and – Configuration programming of lines, control and supervision
12/24VDC, expandable with parameters for emergency demand of generating set
EXP… series modules – Event logging
– Microprocessor supervision of functions; including virtual real
time clock for ATL 610
– Communication interface by front optical port with CX 01 or
ATL 610 Order code Description CX 02 dongle using USB or Wi-Fi
– Compatible with and , supervision and
EXPANSION MODULES FOR ATL 610 energy management software, remote control and
Snap on fixing of two modules on ATL 610 rear. configuration software and with the application for
Inputs and outputs. Android/iOS
– Modbus-RTU, ASCII and TCP communication protocol.
EXP10 00 4 opto-isolated digital inputs
EXP10 01 4 opto-isolated static outputs CONTROL FUNCTIONS OF THE LINES
EXP10 02 2 digital inputs and 2 static outputs, – Phase sequence and phase loss
opto-isolated – Minimum and maximum voltage
– Voltage asymmetry
EXP10 03 2 relay outputs 5A 250VAC – Minimum and maximum frequency.
EXP10 06 2 relay outputs, normally open contact
EXP10... 5A 250VAC Operational characteristics ATL 600 - ATL 601 - ATL 610
EXP10 07 3 relay outputs, normally open contact – Power supply
5A 250VAC • Power supply voltage: 110...240VAC (ATL 600);
12...24VDC (ATL 601); 12...24VDC/110...240VAC (ATL 610)
EXP10 08 2 opto-isolated digital inputs and 2 5A relay
– Voltage measurement inputs
outputs 250VAC • Rated voltage Ue: 100...480VAC (L-L)
Communication ports. • Measuring range: 50...576VAC (L-L)
EXP10 10 Opto-isolated USB interface • Frequency range: 45...65Hz.
– Programmable digital inputs
EXP10 11 Opto-isolated RS232 interface • Negative inputs
EXP10 12 Opto-isolated RS485 interface – Programmable relay outputs
EXP10 13 Opto-isolated Ethernet interface • 5 each with 1 normally open contact (NO - SPST) rated 8A
250VAC
EXP10 14 Opto-isolated Profibus-DP interface • 2 each with 1 changeover contact (NO/NC - SPDT) rated 8A
250VAC
EXP... expansion modules fixing on ATL 610 – Enclosure
• Flush-mount housing: 144x144mm/5.7x5.7”
• IEC degree of protection: IP40 on front; IP65 with optional
seal EXP80 01; IP20 at rear.
Operational characteristics
EXP… expansion module fixing on ATL 800 – Power supply
• Power supply voltage: 100...240VAC;
12/24/48VDC
– Voltage measurement inputs
• Rated voltage Ue: 100...600VAC (L-L)
• Frequency range: 45...65Hz.
– Programmable digital inputs
• Negative inputs
– Programmable relay outputs
• 2 each with 1 normally open contact (NO - SPST) rated
12A 250VAC
MAX • 2 each with 1 normally open contact (NO - SPST) rated
3 8A 250VAC
• 3 each with 1 changeover contact (NO/NC - SPDT)
8A 250VAC
– Enclosure
• Flush-mount housing: 180x240mm/5.7x5.7”
• IEC degree of protection: IP65 on front; IP20 at back.
Compliance
Compliant with standards: IEC 60947-6-1, IEC 60947-4-1.
Automatic transfer
switch controller type
ATL 600
26
Terminal blocks
Accessories Dimensions
page 26-10 and 11 page 26-12 26-9
26 Automatic transfer switch controllers
Accessories
Dual power supply module Order code Description Qty Wt General characteristics
per ATL DPS1 is capable of measuring and controlling voltages
pkg at its inputs selecting the most ideal to connect to the output.
It is suitable to supply motorised circuit breakers and
n° [kg] changeover switches in automatic switching systems of 2
ATL DPS1 For controlling and 1 0.300 three phase supply lines.
selecting supply for The two voltage inputs of the module are independent and
contactors 110...230VAC insulated; each is capable of supplying the internal
configurable measuring circuit managed by the microcontroller.
It reduces the number of components and improves
installation safety.
Main ATL DPS1 features include:
– Voltage value selectable via bypass terminals
– Minimum and maximum voltage tripping thresholds
– 2 single phase L+N inputs
– 1 single phase L+N output
– L1 priority line
ATL DPS1
– Use with motorised control units powered at 110VAC or
230VAC
– Output voltage monitoring
– Internal relay self-diagnosis
– Indicating LEDs for abnormal conditions and status of
110VAC 230VAC inputs and outputs.
MIN MAX MIN MAX Operational characteristics
Line absent < 88V > 152V < 176V > 288V – Rated supply voltage: 110...230VAC configurable
– Frequency: 50/60Hz
Line present < 92V > 144V < 185V > 273V – Input voltage range: 80…300VAC
– Voltage tripping thresholds min / max: 80% and 120% of
Using the thresholds above ATL DPS1 outputs one of the power supplies available according to the logic preset value
shown in the table: – 2 line inputs L1-L2: Single phase, between phase and
neutral
Status LED Status LED Output LED ATL DPS1 Alarm LED – Current output: 4A max
Line 1 Line 1 Line 2 Line 2 Output contact Fault – Priority line: L1 when both input values are within limits
– Fixed delay time between line switching: 0.5s
OK ON <MIN OR >MAX OFF ON - from line 1 ON ON - OK Closed OFF – 4 status indication LEDs for voltage of each line within
OK ON OK ON ON - from line 1 ON ON - OK Closed OFF limits, voltage present at output, relay output anomaly
<MIN OR OFF OK ON ON - from line 2 ON ON - OK Closed OFF – Mounting: 35mm DIN rail (IEC/EN 60715)
>MAX or screw-type by means of removable clips
– Modular housing, 3 module
<MIN OFF <MIN OFF OFF OFF OFF Open OFF – IEC degree of protection: IP40 on front; IP20 at rear.
>MAX OFF <MIN OR >MAX OFF OFF OFF ON Open ON
Certifications and compliance
<MIN OR OFF >MAX OFF OFF OFF ON Open ON
Certifications obtained: cULus, EAC, RCM.
>MAX
Compliant with standards: IEC/EN 61010-1,
OK ON ON - Fault IEC/EN 61010-2, IEC/EN 61000-6-2, IEC/EN 61000-6-4,
>MIN ON OFF OFF Open ON
<MIN OR >MAX OFF Internal relays IEC/EN 60947-1, IEC/EN 60947-6-1, UL508 and
C22.2 n° 14.
OK ON Open ON
<MIN OR OFF >MIN ON OFF OFF Internal
>MAX relays
Dimensions
26-10 page 26-12
26 Automatic transfer switch controllers
Accessories
EXC M4G 01 For ATL 800 and ATL 900, featuring built-in NFC technology,
the LOVATO application is available for parameter
programming.
Available only for Android devices.
See section 29 for details.
EXC CON 01
The EXC CON 01 converter allows “Slave” devices connected
on an RS485 network to interface with a “Master” featuring
Ethernet port:
– Kit comprising MOXA NPORT5230 converter and DIN rail
mounting accessory DK35
– Programming via web interface
RGK RR
– Power supply not included.
See section 30 for details.
EXC M4G 01
The EXC M4G 01 gateway allows “Slave” devices connected
26
on an RS485 network to interface with a “Master” via 4G
network.
RGK RR
It is an expansion unit for remoting statuses and alarms.
RGK RR can be connected at a maximum distance of
1000m/39.37” using the static output of the ATL 900.
RGK RR has 12 output relays, 7 normally open
(2.5A 250VAC/C38) and 5 changeover contacts
(5A 250VAC/B300).
26-11
26 Automatic transfer switch controllers
Dimensions [mm (in)]
45 (1.77”)
98.3 (3.87”)
90 (3.54”)
138 (5.43”)
137 (5.39”)
144 (5.67”)
64.5 (2.54”)
Ø4.2 (0.16”)
73 (2.87”) 9.2
EXP 10... (0.36”)
(2 max)
160 (6.30”)
EXP 10...
(2max)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
L
H
TR
SG
45 (1.77”)
98.3 (3.87”)
90 (3.54”)
107 (4.21”)
96 (3.78”)
99.6 (3.92”)
D2
D20 D2
D29 D2
D28 D19
D1 D21
D2 D3
D30 D2
D22
__
+
INP
19 20 21 22 23 24 25 26 27 27 29 30 31 32 33 34 35 36
Ø4.2 (0.16”)
116 (4.57”) 46.5 (1.83”)
ENCLOSED AUTOMATIC TRANSFER SWITCHES ATS ENCLOSED AUTOMATIC TRANSFER SWITCHES ATS
ATP 0045... - ATP 0060... - ATP 0080... - ATP 0100... ATP 0125... - ATP 0160...
400 (15.75”) 200 (8.16”) 400 (15.75”) 250 (9.84”)
500 (19.68”)
600 (23.62”)
26-12
26 Automatic transfer switch controllers
Wiring diagrams
ATL 100
Connection diagrams
R1
N1
R2
N2
S1
S2
T1
T2
F1❶ F2❶
KM1 KM2
ALARM Y1 Y2
KM2 KM1 Open 230V~
Closed 110V~
KM1 KM2
R
N
S
T
L1
L2
N1
N2
F1❶ F2❶
L1
L2
N1
N2
L1/L L1/N L2/L L2/N F1❷ F2❷ F3❶ F4❶
LINE 1 LINE 2
KM1 KM2 7 6 5 4
7 6 5 4 KM1 KM2
KM1 KM2
Closing pos. II
Closing pos. I
Common +
Closing pos. I
2 3 2 3
Open all pos. 0
Common +
2 3 2 3
2 (N) 2 (N)
Battery Battery
1 (L) - terminal 1 (L) - terminal
1 1 1 1
Pos. I Pos. II Pos. I Pos. II
4A maximum fuses
1A maximum fuses
QF2
5 ATL6... QF2
5 ATL6...
ATL600
ATL610
L1 L1
ATL601
ATL610
ATL601
ATL610
ATL600
ATL610
6 L2 6 L2
LINE 2 LINE 2
7 L3 7 L3
8 N 8 N
AC DC AC DC
Q1 Q2 LINE 1 LINE 2 AUX DIGITAL INPUTS SUPPLY SUPPLY Q1 Q2 LINE 1 LINE 2 AUX DIGITAL INPUTS SUPPLY SUPPLY
_ _
INP 1
INP 2
INP 3
INP 4
INP 5
INP 6
INP 1
INP 2
INP 3
INP 4
INP 5
INP 6
~~ + ~~ +
COM
COM
L1 N1 L2 N2 L1 N1 L2 N2
10
11
12
22
23
24
10
11
12
22
23
24
15
16
17
18
19
20
21
15
16
17
18
19
20
21
13
14
31
32
13
14
31
32
25
26
27
28
29
30
25
26
27
28
29
30
9
L L
OUT OUT
N N
DUAL POWER SUPPLY DUAL POWER SUPPLY
L1 L2 L3 N L1 L2 L3 N
LOAD LOAD
Q1
CLOSING 1
CLOSING 2
OPENING ALL
POWER SUPPLY
CLOSING
CLOSING
OPENING
OPENING
1 - 2 OPENED
1 CLOSED
2 CLOSED
POWER SUPPLY
POWER SUPPLY
TRIP COIL
TRIP COIL
TRIP
TRIP
STATUS
STATUS
INTERLOCK
INTERLOCK
Q2
Q1 Q2
For the correct programming of inputs and outputs, consult the installation manuals available at www.LovatoElectric.com.
26
26-13
26 Automatic transfer switch controllers
Wiring diagrams
ATL 800
Power connection diagrams Power connection diagrams
Two breakers Two breakers and a tie breaker
LINE 1 LINE 2 LINE 1 LINE 2
L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N
QF1 QF1
1 L1 1 L1
2 L2 2 L2
LINE 1 LINE 1
3 L3 3 L3
4 N 4 N
QF2
5
6
L1
L2
ATL800 QF2
ATL800
5 L1
LINE 2
7 L3 6 L2
8 N LINE 2
7 L3
8 N
BRK1 BRK2
BRK1 BRK2
L1 L2 L3 N TB1
LOAD
L1 L2 L3 N L1 L2 L3 N
LOAD 1 LOAD 2
CLOSE LINE 1
CLOSE LINE 2
ATL800 EXP1003
OPEN LINE 1
OPEN LINE 2
ATL800
CLOSE TB1
OPEN TB1
CLOSE LINE 1
CLOSE LINE 2
OPEN LINE 1
OPEN LINE 2
OUT 1
OUT 2
OUT 3
OUT 4
A1 A2 -- +
OUT 1
OUT 2
OUT 3
OUT 4
53 54 26 27 55 56 57 39 40 43 58 59 60 41 44 45 14 12 11 24 22 21
A1 A2 F1A T3.15A
53 54 26 27 55 56 57 39 40 43 58 59 60 41 44
L N - +
AC AUX SUPPLY
12 - 48V=
BATTERY
F1A T3.15A
L N
12 - 48V=
BATTERY
AC AUX SUPPLY
BRK2
INTERLOCK
BRK1
INTERLOCK
CLOSING
CLOSING
OPENING
OPENING
L
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
TRIP
INTERLOCK
TRIP
TRIP
INTERLOCK
INTERLOCK
STATUS
STATUS
STATUS
BRK1 BRK2 FROM ATLDPS1
CLOSING
OPENING
CLOSING
OPENING
POWER SUPPLY
POWER SUPPLY
TRIP
TRIP
STATUS
STATUS
INTERLOCK
INTERLOCK
FROM ATLDPS1 N
For the correct programming of inputs and outputs, consult the installation manuals available at www.LovatoElectric.com.
26-14
26 Automatic transfer switch controllers
Wiring diagrams
ATL 900
Power connection diagrams Power connection diagrams
Three breakers Three breakers and two tie breakers
LINE 1 LINE 2 LINE 2 LINE 1 LINE 2 LINE 3
L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N
QF1 QF1
1 L1 1 L1
2 L2 2 L2
LINE 1 LINE 1
3 L3 3 L3
4 N 4 N
QF2
5
6
L1
L2
ATL900 QF2
5
6
L1
L2
ATL900
LINE 2 LINE 2
7 L3 7 L3
8 N 8 N
QF3 QF3
9 L1 9 L1
10 L2 10 L2
LINE 3 LINE 3
11 L3 11 L3
12 N 12 N
BRK1 BRK2 BRK3 BRK1 BRK2 BRK3
13 S1-1 13 S1-1
14 S1-2 14 S1-2
15 S1-3 15 S1-3
CURRENT CURRENT
16 S1-4 TB1 TB2 16 S1-4
17 S2 17 S2
TA1
18 S2 18 S2
TA2
TA3
TA4
L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N
LOAD LOAD 1 LOAD 2 LOAD 3
CLOSE LINE 2
CLOSE LINE 3
ATL900
OPEN LINE 1
OPEN LINE 2
OPEN LINE 3
OUT 1
OUT 2
OUT 3
OUT 4
OUT 5
OUT 6
A1 A2
53 54 26 27 55 56 57 39 40 43 58 59 60 41 44 61 62 63 42 45
F1A T3.15A
L N
AC AUX SUPPLY
12 - 48V=
BATTERY
INTERLOCK
INTERLOCK
CLOSING
CLOSING
OPENING
OPENING
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
INTERLOCK
STATUS
INTERLOCK
INTERLOCK
TRIP
STATUS
STATUS
TRIP
TRIP
FROM ATLDPS1
CLOSE LINE 2
CLOSE LINE 3
ATL900
OPEN LINE 1
OPEN LINE 2
OPEN LINE 3
CLOSE TB1
CLOSE TB2
OPEN TB1
OPEN TB2
OUT 1
OUT 2
OUT 3
OUT 4
OUT 5
OUT 6
A1 A2
53 54 26 27 55 56 57 39 4043 58 59 60 41 44 61 62 63 42 45 50 51 14 12 11 24 22 21 14 12 11 24 22 21
F1A T3.15A
L N
AC AUX SUPPLY
12 - 48V=
BATTERY
CLOSING
CLOSING
CLOSING
CLOSING
OPENING
OPENING
OPENING
OPENING
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
POWER SUPPLY
TRIP
INTERLOCK
STATUS
TRIP
TRIP
TRIP
TRIP
INTERLOCK
INTERLOCK
INTERLOCK
INTERLOCK
STATUS
STATUS
STATUS
STATUS
FROM ATLDPS1
ATL DPS1
Connection diagram
LINE 1 LINE 2
L N L N
26
ATL DPS1
L N 11 14 Y1 Y2
OUT ALARM OPEN 230V
CLOSED 110V
For the correct programming of inputs and outputs, consult the installation manuals available at www.LovatoElectric.com.
26-15
26 Automatic transfer switch controllers
Technical characteristics
ATL 100 ATL 600 ATL 601 ATL 610 ATL 800 ATL 900
AC POWER
IEC rated insulation Us 110...230VAC 100...240VAC 12/24VDC 100...240VAC 100...240VAC 100...240VAC
Operating range 80...300VAC 90...264VAC –– 90...264VAC 90...264VAC 90...264VAC
Frequency 45...66Hz 45...66Hz –– 45...66Hz 45...66Hz 45...66Hz
Immunity time for micro-breaking –– ≤25ms (110VAC) ≤25ms (110VAC) ≤40ms (110VAC) ≤40ms (110VAC)
–– ≤250ms (220VAC) ≤250ms (220VAC) ≤200ms (220VAC) ≤200ms (220VAC)
Immunity time for micro-breaking –– –– ≤25ms (110VAC) ≤20ms (110VAC) ≤20ms (110VAC)
(with EXP expansions)
–– –– ≤120ms (220VAC) ≤100ms (220VAC) ≤100ms (220VAC)
DC POWER
Rated battery voltage –– –– 12-24VDC 12-24-48VDC 12-24-48VDC
Operating range –– –– 7.5...33VDC 7.5...57.6VDC 7.5...57.6VDC
Maximum power consumption –– –– 230mA at 12VDC and 400mA at 12VAC; 510mA at 12VAC;
120mA at 24VDC 220mA at 24VDC; 260mA at 24VDC;
100mA at 48VDC 135mA at 48VDC
Maximum power consumption/dissipation –– –– 2.9W 4.W 6.5W
VOLTMETER INPUTS
Max. rated voltage Ue 110...230VAC L-N 480VAC L-L 480VAC L-L 600VAC L-L 600VAC L-L
(277VAC L-N) (277VAC L-N) (346VAC L-N) (346VAC L-N)
Measuring range 80...300VAC 50...576VAC L-L 50...576VAC L-L 50...720VAC L-L 50...720VAC L-L
(333VAC L-N) (333VAC L-N) (415VAC L-N) (415VAC L-N)
Frequency range 45...65Hz 45...65Hz 45...65Hz 45...65Hz 45...65Hz
Measurement method True root mean square True root mean square True root mean square True root mean square True root mean square
(TRMS) (TRMS) (TRMS) (TRMS) (TRMS)
Measuring input impedance >8MΩ L-N >0.5MΩ L-N, >0.5MΩ L-N, >0.55MΩ L-N, >0.55MΩ L-N,
>1.0MΩ L-L >1.0MΩ L-L >1.10MW L-L >1.10MW L-L
Connection method 1 phase and neutral One-phase, two-phase, three-phase line with or without neutral and balanced three-phase
AMMETER INPUTS
Rated current Ie –– –– –– –– 1A~ o 5A~
Measuring range –– –– –– –– for 5A scale: 0.02 - 6A~
for 1A scale: 0.02 - 1.2A ~
Type of input –– –– –– –– Shunt supplied by current
transformer external
(low voltage) 5A max.
Measurement type –– –– –– –– True root mean square
(TRMS)
Overload capacity –– –– –– –– -20% Ie
Overload peak –– –– –– –– 50A for 1 second
Burden –– –– –– –– <0.6VA
MEASUREMENT ACCURACY
Mains and genset voltage ±0.25% f.s. ±1 digit ±0.25% f.s. ±1 digit ±0.25% f.s. ±1 digit ±0.25% f.s. ±1 digit ±0.25% f.s. ±1 digit
DIGITAL INPUTS
Number of inputs –– 6 6 8 12
Type of input –– Negative Negative Negative Negative
Input current –– <8mA <8mA <8mA <8mA
Low input signal –– ≤2.2V ≤2.2V ≤2.2V ≤2.2V
High input signal –– ≥3.4V ≥3.4V ≥3.4V ≥3.4V
Input signal delay –– ≥50ms ≥50ms ≥50ms ≥50ms
CALENDAR CLOCK
Backup reserve power –– –– Backup capacitor Backup capacitor Backup capacitor
Operation without power voltage –– –– 5 min approx. 14 days approx. 14 days approx.
RELAY OUTPUTS
Number of outputs 3 7 7 7 10
Configuration – 2NO: AC1 - 4A 250VAC; – 6NO: AC1 - 8A 250VAC; – 6NO: AC1 - 8A 250VAC; – 2NO: AC1 - 12A 250VAC; – 3NO: AC1 - 12A 250VAC;
1.5A 250V~ AC15 AC15 -1.5A 250VAC; B300 AC15 -1.5A 250VAC; B300 AC15 - 1.5A 250VAC; B300 AC15 - 1.5A 250VAC; B300
– 1NO: AC1 - 3A 250VAC; – 1 changeover: – 1 changeover: – 2NO: AC1 - 8A 250VAC; – 3NO: AC1 - 8A 250VAC;
DC1 - 3A 30VDC AC1 - 8A 250VAC, AC1 - 8A 250VAC, AC15 - 1.5A 250VAC; B300 AC15 - 1.5A 250VAC; B300
DC1 - 8A 30VDC; DC1 - 8A 30VDC; – 3 changeover: – 4 changeover:
AC15 - 1.5A 250VAC, AC15 - 1.5A 250VAC, AC1 - 8A 250VAC, AC1 - 8A 250VAC,
B300 30VDC1A B300 30VDC1A DC1 - 8A 30VDC; DC1 - 8A 30VDC;
Auxiliary service Auxiliary service AC15 - 1.5A 250VAC; AC15 - 1.5A 250VAC;
B300 30VDC 1A B300 30VDC 1A
Auxiliary service Auxiliary service
Mechanical / electrical endurance 1x107 / 1x105 operations 1x107 / 1x105 operations 1x107 / 1x105 operations 1x107 / 1x105 operations 1x107 / 1x105 operations
STATIC OUTPUT
Output type –– –– –– –– NO
Operating voltage –– –– –– –– 10-30V
Maximum current –– –– –– –– 50mA
26-16
26 Automatic transfer switch controllers
Technical characteristics
ATL 100 ATL 600 ATL 601 ATL 610 ATL 800 ATL 900
AMBIENT CONDITIONS
Operating temperature -30...+70°C
Storage temperature -30...+80°C
Relative humidity <80% (IEC/EN 60068-2-78)
Maximum pollution degree 2
Overvoltage category 3
Measurement category III
Climatic sequence Z/ABDM (IEC/EN 60068-2-61)
Shock resistance 15g (IEC/EN 60068-2-27)
Vibration resistance 0.7g (IEC/EN 60058-2-6)
HOUSING
Version Modular housing 3 modules Flush-mount
(DIN 43880)
Material Polyamide RAL 7035 Polycarbonate
IEC degree of protection IP40 on front IP40 on front IP65 on front
IP20 on terminals IP65 with optional gasket IP20 on terminals
IP20 on terminals
Weight 300g 600g 680g 1000g 1800g
CERTIFICATIONS AND COMPLIANCE
Certifications obtained EAC cULus (ATL 601 pending), RCM (only for ATL 600 - ATL 610), EAC
Compliance with standards IEC/EN 61010-1, IEC/EN 61010-1, IEC/EN 61010-2, IEC/EN 61000-6-2, IEC/EN 61000-6-4, IEC/EN 60947-1,
IEC/EN 61010-2, IEC/EN 60947-6-1, UL508 e CSA C22.2 n°14
IEC/EN 61000-6-2,
IEC/EN 61000-6-4,
IEC/EN 60947-1,
IEC/EN 60947-6-1
26
26-17