Professional Documents
Culture Documents
Dated: 29-02-2020
Bid Document
Bid Details
Bid End Date/Time 10-03-2020 13:00:00
Bid Life Cycle (From Publish Date) 90 (Days)
Bid Offer Validity (From End Date) 30 (Days)
Ministry/State Name Ministry Of Home Affairs
Department Name Central Armed Police Forces
Organisation Name Border Security Force (bsf)
Office Name Stc Bsf Chakur
Total Quantity 3221
Item Category Ball Point Pen , Roller Ball Pen , Photocopier Paper
with Printing , Report Cover , Gel Pen , Gel Pen , Gel
Pen , Gel Pen , Gel Pen , Gel Pen , folder binding
accessories- dak pad ,file board- flap , glossy photo
paper , transparent tape , adhesive tape spindles ,
adhesive tape spindles , adhesive tape spindles ,
Wooden Pencil , Ink for Stamp Pads , Sketch Pen
(Fibre Tip) , Gum (Paper Adhesives, Liquid Gum and
Office Paste Type) , Eraser , manual pencil sharpener
, desktop calculator-Electronics , Paper weights , pen
stand , poker or awl , ink refills , self adhesive paper
note , tag fastener , flexible transparent sheet-PVC or
Polyester , Lever Arch File , Folders-file cover
MSE Exemption For Years Of Experience Yes
And Turnover
Startup Exemption For Years Of Experience Yes
And Turnover
Bid to RA enabled No
Primary product category Folders-file cover
EMD Detail
Required No
ePBG Detail
Required No
Splitting
Bid splitting not applied.
1 / 31
Ball Point Pen ( 100 pieces )
Technical Specifications
2 / 31
TC Ball Tip (mm) 0.5 0.5
Writing Length 2500 2500
(Meter)
Model / other - *
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
3 / 31
Watermark logo No *
Details of logo - *
Colour, size and Yes *
location of logo will be
specified in purchase
order
Additional "The material shall be Yes *
Requirements for eco manufactured from
mark pulp containing not less
than 60 percent by
mass of pulp made
from materials other
than bamboo,hard
woods ,softwoods and
reed or the material
shall be manufactured
from pulp made from
100 percent waste
paper"
Physical Characteristics The photocopier paper Yes *
shall be devoid of
pinholes The surface
shall be well
calendered, quite
smooth and free from
fluff or loose flbres
Surface sizing with
starch is desirable for
avoiding fluff
The paper shall have Yes *
good dimensional
stability, thermal
stability and shall not
have any static charge
"ISO Brightness,perc 88 88
ent,Min"
"Moisture 6 6
content,percent,Max
"
Opacity, percent, 88 88
Min
One minute cobb 30 30
test, g/m2, Max
Surface strength, No pick on 12 A No pick on 12 A
Dennison(Wax Pick)
Smoothness for both 300 300
sides
(Bendsten),ml/min
"Ash content(900◦C) 16 16
,percent by
mass,Max"
4 / 31
"Taber Stiffness 2 2
,Machine
Direction(MD),Min"
Taber Stiffness 1 1
,Cross
Direction(CD),Min
"Tear Index in mN 3.5 3.5
m²/g,Machine
Direction(MD),Min"
"Tear Index in mN 4.5 4.5
m²/g,Cross
Direction(CD)Min,"
"Tensile Index 40 40
Machine Direction
(MD) ,Nm/g, Min"
Tensile Index Cross 25 25
Direction(CD),Nm/g,
Min
Size and GSM Size of paper A4 A4
Grammage 75 75
(GSM)(g/m2)
"If any other GSM, - *
please specify"
Quantity Number of sheets in 500 500
a pack(nos)
Net weight per pack 1 1
(kg)
Packing and Marking Packing "Packing as per clause *
6-1 of
IS:14490(Latest)"
The package should be Yes *
marked with
Description and size of
Paper,Quantity,Mass of
500/250 sheets
including wrapping
paper in kg/ream
Chargeable wt should
be net wt excluding the
wt of packing,Lot
Number and
month/year of
manufacturing,Name of
manufacturer
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
5 / 31
Consignees/Reporting Officer and Quantity
6 / 31
S.No. Consignee/Reporti Address Quantity Delivery Days
ng Officer
1 Manoj Kumar 413513,STC BSF CHAKUR PO 100 30
CHAKUR DISTT LATUR
STATE MAHARASTRA PIN
413513
7 / 31
Color of Ink Ink Color Red *
Physical Characteristics Writing Length 1500 1500.0 - 3000.0 Or
(Meter) higher
TC Ball Tip (mm) 0.5 0.5
Line Width (mm) 0.3 0.3
Model / other - *
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
8 / 31
S.No. Consignee/Reporti Address Quantity Delivery Days
ng Officer
1 Manoj Kumar 413513,STC BSF CHAKUR PO 30 30
CHAKUR DISTT LATUR
STATE MAHARASTRA PIN
413513
9 / 31
Color of Ink Ink Color Green *
Physical Characteristics Writing Length 100 100.0 - 3000.0 Or
(Meter) higher
TC Ball Tip (mm) 0.5 0.5
Line Width (mm) 0.3 0.3
Model / other - *
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
10 / 31
S.No. Consignee/Reporti Address Quantity Delivery Days
ng Officer
1 Manoj Kumar 413513,STC BSF CHAKUR PO 30 30
CHAKUR DISTT LATUR
STATE MAHARASTRA PIN
413513
11 / 31
S.No. Consignee/Reporti Address Quantity Delivery Days
ng Officer
1 Manoj Kumar 413513,STC BSF CHAKUR PO 50 30
CHAKUR DISTT LATUR
STATE MAHARASTRA PIN
413513
12 / 31
S.No. Consignee/Reporti Address Quantity Delivery Days
ng Officer
1 Manoj Kumar 413513,STC BSF CHAKUR PO 10 30
CHAKUR DISTT LATUR
STATE MAHARASTRA PIN
413513
13 / 31
S.No. Consignee/Reporti Address Quantity Delivery Days
ng Officer
1 Manoj Kumar 413513,STC BSF CHAKUR PO 100 30
CHAKUR DISTT LATUR
STATE MAHARASTRA PIN
413513
14 / 31
Consignees/Reporting Officer and Quantity
15 / 31
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
16 / 31
No.of pieces per box 12 12
(Nos.)
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
17 / 31
S.No. Consignee/Reporti Address Quantity Delivery Days
ng Officer
1 Manoj Kumar 413513,STC BSF CHAKUR PO 20 30
CHAKUR DISTT LATUR
STATE MAHARASTRA PIN
413513
18 / 31
Latest
ISI Marked No No
CM/L Number - *
Physical Properties Fibre Tip Diameter 1.8 *
(mm)
Cap With Pocket Clip With Pocket Clip
Packing Packing (Packet) 12 Nos of different 12 Nos of different
Colours Colours
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
Gum (Paper Adhesives, Liquid Gum And Office Paste Type) ( 40 pieces )
Technical Specifications
19 / 31
Name of the Lab - *
Address of the Lab - *
Material Material Type B Type B
Packing Size Packing Size (Grams) 200 200
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
Eraser ( 25 packet )
Technical Specifications
20 / 31
1 Manoj Kumar 413513,STC BSF CHAKUR PO 25 30
CHAKUR DISTT LATUR
STATE MAHARASTRA PIN
413513
21 / 31
* As per GeM Category Specification
22 / 31
Specification Specification Name Values Bid Requirement
(Allowed Values)
Material Material Glass Glass
Shape Shape Cubical *
Weight Weight (approx.) 125 125
(gm)
Transparency Transparency Transparent Transparent
General Characteristics Art work/Logo inside no no
of the shell
Does not got broken on yes *
fall from 1m height on
a concrete floor
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
23 / 31
(Nos)
Number of Pens in 2 2
the Pen Stand (Nos)
Design Design As per Photograph *
Uploaded
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
24 / 31
treatment on Blade
plating Material
Dimensions
* Specifications highlighted in bold are the Golden Parameters.
* Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by
Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
25 / 31
Consignees/Reporting Officer and Quantity
26 / 31
Tag Fastener ( 1000 set )
Technical Specifications
27 / 31
STATE MAHARASTRA PIN
413513
28 / 31
STATE MAHARASTRA PIN
413513
29 / 31
* As per GeM Category Specification
1) Subject to provisions of Public Procurement (preference to `Make in India`) order 2017 notified
vide Department of Industrial Policy and Promotion Ministry of Commerce and Industry order dated
31st July2018 the following types of Paper Paper Board and Newsprint where sufficient domestic
30 / 31
manufacturing capacity and local competition is available minimum local content is specified as
below: Type of Paper - Photocopier Paper with Printing Relevant BIS Standard - IS 14490:1997
Minimum Local Content (%) - 75
2) The minimum local content shall be reckoned with reference to ex-factory price (pre-GST) on
which the manufacturer has paid GST.
3) The Public Procurement of paper for office supplies and printing of textbooks should be certified
to be manufactured in India by paper mill that does not import more than 25% of its total raw
material consumed.
---Thank You---
31 / 31