Professional Documents
Culture Documents
MONOBLOCK
DIRECTIONAL CONTROL VALVE
SDM080
Features
Simple, compact and heavy duty designed monoblock valves from 1 to 6 sections for open and closed centre hydraulic systems.
H Fitted with a main pressure relief valve and a load check valve.
H Available with parallel or tandem circuit.
H Optional carry--over port.
H Diameter 14 mm -- 0.55 in interchangeable spools.
H Available manual, with microswitches and remote with flexible cables spool control kits.
Additional information
This catalogue shows the product in the most standard configurations.
Please contact Customer Service Dpt. for more detailed information or
special request.
WARNING!
All specifications of this catalogue refer to the standard product at this date.
Walvoil, oriented to a continuous improvement, reserves the right to
discontinue, modify or revise the specifications, without notice.
WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN 6th edition November 2000:
INCORRECT USE OF THE PRODUCT. This edition supercedes all prior documents.
2 DAT001E
SDM080
Contents
Contents
Working conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Dimensional data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Hydraulic circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Performance data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Ordering codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Inlet relief options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Spool options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
“A” side spool positioners . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
“B” side options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Inlet and outlet port options . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation and maintenance . . . . . . . . . . . . . . . . . . . . . . . . 24
DAT001E 3
SDM080
Working conditions
This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40°C tempera-
ture.
4 DAT001E
SDM080
Dimensional data
WALVOIL
MADE IN ITALY
Valve code MADE IN ITALY
100820001
SDM080/2
P0000001
61.5
2.42
24
0.95
15
0.59
0.32
8
P T
M8 n.3 threads
3.62
176.5
2.72
6.95
92
61.5
2.42
69
2.36
60
0.37
35.5
1.40
32.25
9.5
1.27
24 10.5
0.95 0.41
M8
Posit. 1
10.5
0.41
15°
46.5
1.83
Posit. 0
15
15°
0.59
Posit. 2
M8 32 32 32
33.7 21 1.26 1.26 1.26
1.33 0.83 16 F
90 0.63
3.54 E 5
0.2
96
3.78
0.67
17
0.94
24
1.57
40
E F Weight E F Weight
TYPE TYPE
mm in mm in kg lb mm in mm in kg lb
SDM080/1--P 95 3.74 64 2.52 2.5 5.5 SDM080/4--P 191 7.52 160 6.30 5.5 12.2
SDM080/2--P 127 5.00 96 3.78 3.5 7.7 SDM080/5--P 223 8.78 192 7.56 6.5 14.3
SDM080/3--P 159 6.26 128 5.04 4.5 9.9 SDM080/6--P 255 10.04 224 8.82 7.5 16.5
Standard threads
BSP UN--UNF METRIC
PORT
(ISO 228/1) (ISO 11926--1) (ISO 6149--1)
DAT001E 5
SDM080
Hydraulic circuit
Standard execution with left inlet in relation to the lever pivot box and top inlet and outlet ports (PSA configuration).
P T
T2
Pressure line
Outlet line
T2
T2 T2
175 175
2500 2500
NOTE -- A simmetrical body allows the reverse assembly of spools and relative control kits (right inlet ED).
6 DAT001E
SDM080
Performance data (pressure drop vs. flow)
Open centre
From upper inlet to upper outlet (PSA configuration).
40
(bar) 540
(psi)
30 6 sections
A1 A2 A3 A4 A5 A6
Pressure drop
T 360
P 4 sections
20
2 sections
B1 B2 B3 B4 B5 B6 180
10
0
0 10 20 30 40
Flow (l/min)
40
(bar) 540
(psi)
30
A1 A2 A3 A4 A5 A6 P®A6(B6)
Pressure drop
T 360
P
20 P®A1(B1)
B1 B2 B3 B4 B5 B6 180
10
0
0 10 20 30 40
Flow (l/min)
40
(bar) 540
(psi)
30
Pressure drop
A1 A2 A3 A4 A5 A6 360
A1(B1)®T
P T 20
A6(B6)®T
180
B1 B2 B3 B4 B5 B6 10
0
0 10 20 30 40
Flow (l/min)
DAT001E 7
SDM080
Ordering codes
following
Example: 1st section
section
1. 2. 3. 4. 5. 6.
PSA PSC
1. Body kit * 8 AE AEK
TYPE CODE DESCRIPTION AEK
1-- P 5KC5113000 Parallel 1 section
2-- P 5KC5123000 Parallel 2 sections
3-- P 5KC5133000 Parallel 3 sections
4-- P 5KC5143000 Parallel 4 sections
5-- P 5KC5153000 Parallel 5 sections
6-- P 5KC5163000 Parallel 6 sections I
Include body, seals and load check valve.
8D2
8 DAT001E
SDM080
Ordering codes
II Optional handlevers
LCB
T TYPE CODE DESCRIPTION
AL01/M8x120 170011012 For L lever box L = 120 mm / 4.72 in
AL08/M12x150 170013115 For LCB joystick L = 150 mm / 5.91 in
SV
II
DAT001E 9
SDM080
Inlet relief options
VMD080 ( T G 3 - 175)
Pressure setting in bar (standard 175 bar -- 2500 psi).
(2, 3, 4).
Adjustable spring type
Adjustment type (G, Z).
Adjustemt type
Allen wrench 5
44 max. 47
1.80 1.85
Performance data
Pressure
Pressure
0 0 0
0 10 20 30 0 10 20 30 0 10 20 30
Flow (l/min) Flow (l/min) Flow (l/min)
95%
Pressure
175 b ar
90%
2500 psi
Allen wrench 6
42 Nm / 31 lbft
10%
4
0.16 Time (”)
0.26”
RESPONSE TIME
10 DAT001E
SDM080
Spool options
Type 1
1 0 2
A B
A B
+ 5,5mm
" stroke =
+ 0.22 in
T P LC P T P T
P®A B®T
31
10
0.39 A B
1.22 1 0 2
24
0.95 A B
0.71
Æ14
T P LC P T P T
133
5.24
P--A--B--T closed, with flow through line (LC) open
1 0 2
A B
A B
-- 5,5mm
A stroke =
- 0.22 in
T P LC P T P T
P®B A®T
Performance data
20 = Type 1 20
F
Qin = 25 l/min
Flow
Flow
F Y
= Type 1CS J
J
10 Y Qin = 12 l/min 10
F J
Y F P(on ports) = 63bar/900psi Y
J Y P(on ports) = 100bar/1450psi F
0 J P(on ports) = 250bar/3600psi 0
0.0 1.0 2.0 3.0 4.0 5.0 0.0 1.0 2.0 3.0 4.0 5.0
Stroke (mm) Stroke (mm)
DAT001E 11
SDM080
Spool options
Type 1PA(55)BH
A B 1 0 2
A B
+ 5.5mm
" stroke =
+ 0.22 in
T P LC P T P T
P®A B®T
A B 1 0 2
A B
T P LC P T P T
A B 1 0 2
A B
-- 5.5mm
A stroke =
- 0.22 in
T P LC P T P T
P®B A®T
Performance data
Pressure--flow diagram
150
(bar) 2000
120 (psi)
Pressure
90
1000
60
30
0
0 2 4 6 8 10
Flow (l/min )
12 DAT001E
SDM080
Spool options
Type 1PB(190)
A B 1 0 2
A B
+ 5.5mm
" stroke =
+ 0.22 in
T P LC P T P T
P®A B®T
A B 1 0 2
A B
T P LC P T P T
A B 1 0 2
A B
-- 5.5mm
A stroke =
- 0.22 in
T P LC P T P T
P®B A®T
Performance data
Pressure--flow diagram
250 (psi)
(bar)
200 3000
Pressure
150
2000
100
1000
50
0
0 2 4 6 8 10
Flow (l/min )
DAT001E 13
SDM080
Spool options
Type 2CS
1 0 2
A B
A B
+ 5,5mm
" stroke =
+ 0.22 in
T P LC P T P T
P®A B®T
1 0 2
A B
A B
T P LC P T P T
P closed, A e B to tank
with flow through line (LC) open
1 0 2
A B
A B
-- 5,5mm
A stroke =
- 0.22 in
T P LC P T P T
P®B A®T
Performance data
20
Flow
10 Qin = 12 l/min
F
J F P(on ports) = 63bar/900psi
Y P(on ports) = 100bar/1450psi
Y
0 J P(on ports) = 250bar/3600psi
0.0 1.0 2.0 3.0 4.0 5.0
Stroke (mm)
14 DAT001E
SDM080
Spool options
Type 3CS
1 0 2
A
+ 5,5mm
" stroke =
+ 0.22 in
T P LC P T P T
P®A
Port B plugged
A
1 0 2
A
T P LC P T P T
1 0 2
A
-- 5,5mm
A stroke =
- 0.22 in
T P LC P T P T
A®T
Performance data
20 20
Flow
Flow
F J
10 Qin = 12 l/min 10
J F
F P(on ports) = 63bar/900psi
Y Y
Y P(on ports) = 100bar/1450psi
0 J P(on ports) = 250bar/3600psi 0
0.0 1.0 2.0 3.0 4.0 5.0 0.0 1.0 2.0 3.0 4.0 5.0
Stroke (mm) Stroke (mm)
DAT001E 15
SDM080
”A” side spool positioners
1 0 2
0 0
A - 10
--75 B
- 20
C
- 30
38 --150
1.50 --5.5 --4.5 --3.5 --2.5 --1.5 --0.5 0 0.5 1.5 2.5 3.5 4.5 5.5
Stroke (mm)
1 0 2
Wrench 9 Wrench 9
9.8 Nm / 7.2 lbft 9.8 Nm / 7.2 lbft
8D kit 8D2 kit
Allen wrench 4 Allen wrench 4
6.6 Nm / 4.9 lbft 6.6 Nm / 4.9 lbft
M8
M6
37
1.46
44 84
1.73 3.31
16 DAT001E
SDM080
“A” side spool positioners
With detent
9B kit
Allen wrench 4 1 0 2
6.6 Nm / 4.9 lbft
Wrench 5
9.8 Nm / 7.2 lbft
Operating features
Unlocking force . . . . . . . . . . . . . . . . . : 200 N / 45 lbf ±10%
72.5
2.85
10B kit
Allen wrench 4
6.6 Nm / 4.9 lbft
1 0 2
Wrench 5
9.8 Nm / 7.2 lbft
Operating features
Unlocking force . . . . . . . . . . . . . . . . . : 200 N / 45 lbf ±10%
72.5
2.85
11 kit
Allen wrench 5
9.8 Nm / 7.2 lbft 1 0 2
Allen wrench 4
6.6 Nm / 4.9 lbft
Operating features
Locking force . . . . . . . . . . . . . . . . . . . : 100 N / 22.5 lbf ±10%
Unlocking force . . . . . . . . . . . . . . . . . : 100 N / 22.5 lbf ±10%
38
1.50
11B kit
Allen wrench 4
6.6 Nm / 4.9 lbft
1 0 2
Wrench 5
9.8 Nm / 7.2 lbft
Operating features
Unlocking force . . . . . . . . . . . . . . . . . : 200 N / 45 lbf ±10%
72.5
2.85
DAT001E 17
SDM080
“A” side spool positioners
Allen wrench 4
25.5 Bracket for 5MIC100
6.6 Nm / 4.9 lbft
M3 1 1.00 microswithc
Microswitch n.2 threads 0.04
0.32
on request
8
58.5
2.32
Rocker arm to Allen wrench 2.5
actuate micro- 6.6 Nm / 4.9 lbft
switch
P T
B1 B2
P
T
A1 B1 A2 B2
P1 T1
T2
175
2540
Ex.: SDM080/2--P(TG3--175)/18MS3L/18MS3L/PSA -- KM 2 S 51
51 = with bracket for IP51 microswitch fixing
Assembling kit
67 = with bracket for IP67 microswitch fixing
18 DAT001E
SDM080
“A” side spool positioners
1 0 2
Other configurations
8MS1 kit
microswitch operation in
position 1
Notch Allen wrech 2.5 -- 6.6 Nm / 4.9 lbft
9.8 Nm / 7.2 lbft
1 0 2
8MS2 kit
microswitch operation in
position 2
1 0 2
1.00 0.55 33 6
1.30 0.24
Æ
M3
2.52
M4
64
55.5
2.19
30.2
1.19
27.1
1.07
Stroke
21 4 Stroke
0.10
2.5
0.16 18 4
1.5
0.83
0.06
0.71 0.16
68
2.68
Operating features Operating features
Current / voltage max. . . . . . . . . . . . . : 15 A / 480 VAC Current / voltage max . . . . . . . . . . . . . : 5 A / 250 VAC
: 0,25 A / 250 VDC : 0,25 A / 230VDC
Weather protection . . . . . . . . . . . . . . . : IP51 Weather protection . . . . . . . . . . . . . . . : IP67
DAT001E 19
SDM080
”B” side options
Lever box L
Reinforced nylon with protection boot lever pivot box; it can be rotated 180° (L180 configuration).
1 0 2
1 0 2
14°40’ 14°40’
Vertical handlever
assembly Horizontal handlever
assembly
M8
L180 configuration
2.60
66
54.7
2.15
0.83
21
103.5
4.07
46.5
1.83
30.7
1.21
1.65
42
17.1
0.32
0.67
8
Allen wrench 4
9 6.6 Nm / 4.9 lbft
0.35
Ø8H8 0.3149
0.3158
Æ 13.5
0.53
7
0.28
20 DAT001E
SDM080
”B” side options
TQ cable connection
Waterproof cap for remote control with flexible cable.
1 0 2
Wrench 13 Wrench 10
Wrench 24
Wrench 24
Flexible cable
Allen wrench 4
6.6 Nm / 4.9 lbft
81
3.19
TQ kit
T P
NOTE -- For more information concerning remote cable control require appropriate documentation.
DAT001E 21
SDM080
”B” side options
1 0 2
2nd section spool
Wrench 13
42 Nm / 31 lbft
1st section spool 1 0 2
Wrench 10
Allen wrench 4
9.8 Nm / 7.2 lbft
Pivot
Wrench 10
Allen wrench 4
9.8 Nm / 7.2 lbft
spool axis
A2--B1 B1--B2
M12
A2 B2
0.94
24
0.55
14
B2--A1
A2--A1 22 10
0.23
5.9
0.39 80.3
0.87 3.16
A1
B1--B2 B2--A1
A2
B2 B1 A1
A1
1.34
34
B1
A2--B1 B1--B2
B1--B2 A1--B2
B1--A2 10 22 A1--A2 B1
0.39 0.87 B2
A2
22 DAT001E
SDM080
Inlet and outlet options
Allen wrench 6
24 Nm / 17.7 lbft
66.5
2.62
T2
T2
175
2500
Ex.: SDM080/2--P(TG3--175)/18L/18L/PSC
175
2500
Ex.: SDM080/2--P(TG3--175)/18L/18L/AE
Allen wrench 6
P
24 Nm / 17.7 lbft A1 B1 A2 B2 T
P T
Plug M10x1 DIN906 P1 T1
Allen wrench 5
24 Nm / 17.7 lbft
T2
T2
175
2500
Ex.: SDM080/2--P(TG3--175)/18L/18L/AEK
DAT001E 23
SDM080
Installation and maintenance
The SDM080 valve is assembled and tested as per the technical specification of this catalogue.
Before the final installation on your equipment, follow the below recommendations:
-- the valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat
surface;
-- in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly
on the valve;
-- prior to painting, ensure plastic port plugs are tightly in place.
A2
A1
B2
B1
C
T
Carry--over configuration
NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and
surface finish. The manufacturer shall be consulted.
24 DAT001E
SDM080
Installation and maintenance
Ring chamfer
Body
NOTE -- All articulated parts inside cap, lever box and mechanical joystick are lubricated with synthetic base grease grade NLGI2
DAT001E 25
SDM080
Notes
The SDM080 valve can be supplied with one coat of opaque black paint (CVN configuration).
Example of specification: SDM080/2--P(TG3--175)/18L/18L/PSA--<CVN>
26 DAT001E
SDM080
DAT001E 27
WALVOIL S.P.A.
42100 REGGIO EMILIA · ITALY · VIA ADIGE, 13/D
TEL. +39.0522.932411 · FAX +39.0522.300984
E--MAIL: INFO@WALVOIL.COM · HTTP: //WWW.WALVOIL.COM
SALES DEPARTMENT
TEL. +39.0522.932555 · FAX +39.0522.932455
D1409808I
DAT001E