Professional Documents
Culture Documents
Wall thickness
Barg Y 0.4 E = weld quality factor (weld efficiency) W = weld joint strength reduction factor
0.8 to 1.5 MM is Industrial
Psig Ca 0.8 Standard practice Y = coefficient from Table 304.1.1, valid for t < D /6
PSI (S)
mm
MM
or internal pressure
https://www.littlepeng.com/single-post/2017/07/12/ASME-B313-Quality-Factors
https://www.littlepeng.com/single-post/2017/07/13/ASME-B313-Weld-Joint-Strength-Reduction-Factors
https://www.pipingengineer.org/pipe-thickness-calculator/