Professional Documents
Culture Documents
Technical data
? PN 10 - 40
? DN 50/50 - 800/800
? Flanged (type AKD) or butt-weld ends (type AKDS)
? Bolted bonnet
? Wedge
? -10°C to + 400°C
? Material: DN 50-200: C 22.8
DN 250-300: P 265 GH (HII)
? Face-to-face length:
Flanged variant :
PN 10-25 EN 558-1/15 (prev.: F5)
PN 40 EN 558-1/26 (prev.: F7)
Weld end variant:
PN 10-25 EN 12982/15 (prev.: DIN 3202/T2/ S8)
PN 40 EN 12982/26 (prev.: DIN 3202/T2/ S9)
Applications
? Industrial, power station and process engineering systems
? Shipbuilding
? Water, steam, gas, oil and other non-aggressive media
V57 - 04/03
Menú Performance
Movable wedges
Wedge holder
Your benefit:
Your benefit:
? Precise alignment to the
? No additional loads on
body seats
wedges caused by
? Wedge segments are easy
operating forces
to replace
PN 10-40: DN 50-200
V57 - 04/03
Menú Performance
PN 10-40: DN 50-200
V57 - 04/03
Menú Performance
V57 - 04/03
Menú Performance
Technical data
? PN 10 - 40
? DN 80/80 - 400/400
? Flanged (type AKK) or butt-weld ends (type AKKS)
? Bolted bonnet
? with internal shaft
? -10°C to + 400°C
? Materials: DN 80-200: St 35.8
DN 250-400: P 265 GH (HII)
? Face-to-face length:
Flanged variant:
PN 10-40 EN 558-1/1 (prev.: F1)
Weld end variant:
PN 10-40 EN 12982/64 (früher DIN 3202/T2 Reihe S9)
Applications
? Industrial, power station and process engineering systems
? Shipbuilding
? Water, steam, gas, oil and other non-aggressive media
V57 - 04/03
Menú Performance
V57 - 04/03