Professional Documents
Culture Documents
Examples of work plans found online - Instructables DIY Phone Pouch | We All Sew | Nutella Brownies
🔎 What?
C1: Outline a plan, which considers the use of resources and time, sufficient for peers to be able to follow to create the solution.
1. Describe all steps needed to create your product. In this step plan:
● List all tools you will need for each step.
● List all materials you will need for each step (where appropriate).
● Record the estimated time it should take to complete each step.
● Outline safety precautions for each step (where appropriate).
● Outline/describe what each step entails (bullet point sequence of smaller ‘sub-steps’).
● Present photographs and/or screenshots that illustrate the production process of your product (if found)
2. Summarize the materials and tools of the project in the following:
● Cutting List
● Tools List
3. Extension: Present photographs of your pattern & prototype (if complete)
Consider
Despite the fact that every student has their own project, it is likely your plan has some of the following ‘steps’:
- Create seams
- Iron fabric
- Mark out pattern A
- Cut pattern A
- Press seams on part A with iron
- Pin part A to part B
- Sew part A to part B
- Apply rivets/eyelets/snap buttons
- Sew on snap-buttons/velcro/zipper
The student lists some of the The student lists the main The student lists the steps in a The student outlines a
main steps in a plan that steps in a plan that contains plan, which considers time plan, which considers the
contains some details, some details, resulting in and resources, resulting in use of resources and time,
resulting in peers having peers having difficulty peers being able to follow the sufficient for peers to be
significant difficulty following following the plan to create plan to create the solution. able to follow to create the
the plan to create the solution. the solution. solution.
1/9
Design Folder Sustainable Design - Jane Doe (7DET8)
Source(s) (MLA format): Cecilia, Mayra. "The Simplest Way to Line a Bag of Any Kind" ["The Simplest Way
to Line a Bag of Any Kind"]. so-sew-easy, edited by Mayra Cecilia, 1st ed.,
so-sew-easy.com/simplest-way-line-bag-kind/. Accessed 24 Apr. 2020. Court, Crafting With. "Pocket T-shirts DIY." cut out
and keep, 25 Jan. 2015, www.cutoutandkeep.net/projects/pocket-t-shirt-diy. Accessed 24 Apr. 2020. "How to Sew a Button."
Wikihow, 29 Mar. 2019, www.wikihow.life/Sew-a-Button.
Accessed 24 Apr. 2020. "BACKSTITCH – How to Backstitch – Easy Step by Step." blog. treasurie,
treasurie, blog.treasurie.com/how-to-back-stitch/
#How_to_Backstitch_Tutorial_Step_by_Step. Accessed 24 Apr. 2020.
EX. Prepare fabric - Fabric scissors 20m Cut the legs of the jeans just below the pockets. Open the legs by
- Denim jeans cutting along the thick seam (inside leg).
Be careful with the rotary cutter so that your cuts are precise.
1 Measer the bag -ruler 30 m Height of both side measure the key sticking areas
-tank top Measer the hand and the bottom
Marking pen
2 Cut a pieces Marking pen 15 m Cut a piece of fabric to what measurements were takes of the last
fabric to match Fabric scissors bag
the Fabric
measurements Ruler
2/9
Design Folder Sustainable Design - Jane Doe (7DET8)
Stuff the exterior of your bag into the lining. They'll be right sides
together. \
1. Tuck your straps down into the bag, and pin them in
place. The raw edges of your straps should be flush to
the top raw edge of your bag. You should be able to look
down into your bag and see the wrong side of the
exterior.
2. Pin around the top of the bag, through all layers.
3. Leave yourself a 76.2-127 opening, and place a pin
parallel to the top of the bag there.
4. Beginning at the end of the pin you placed parallel, sew
a 5/8″ seam around the top of the bag and stop at the
beginning of the pin.
5. You'll now have a small opening.
6. Trim your seam allowance to 6.35, leaving the seam
allowance intact at the opening. Watch out for pins! You'll
have a few pins holding your strap or handles in place.
7. Reach into the opening of the bag and grab the lining.
8. Pull the lining through the opening, and keep pulling until
you also pull the exterior through the opening.
9. Keep pulling until you've pulled all the fabric through the
opening and have something that resembles a long tube,
with your lining on one side and the exterior of your bag
on the other side.
10. Now, tuck the lining of the bag down into the exterior of
your bag so that you have something that resembles a
normal tote!
11. Press the opening that you pulled your bag through,
closed and pin it.
12. Press around the entire top of the bag. Next, topstitch
around the top of your bag, through the lining and the
exterior a scant 6.35 from the edge.
13. Trim your threads, gently poke out the corners of your
bag, and you're done!
3/9
Design Folder Sustainable Design - Jane Doe (7DET8)
4.Fold the seams for your pocket. Fold the sides of your fabric
between 6.35 and 12.7. Fold the sides and bottom of the pocket
first. Fold the top of the pocket last; this fold should be ½” to 1”.
Pin each of these folds down
5.Iron all the folds in place. Using your iron, iron down all the
folds. Remove the pins as necessary.
6.
Sew the hem at the top of your pocket. This will be the part of
your pocket that remains open.
7.Place your pocket on your T-shirt. Put on your T-shirt and pin
the pocket to the location you want it. Take the T-shirt with the
pocket off. Laying the T-shirt and pocket flat, move the pocket
around slightly to make sure it’s on straight. Pin the pocket down
for sewing. Do not put pins through both sides of the shirt. Make
sure your pins are only pinning the pocket to the front side of the
shirt.
8.Sew the pocket to the T-shirt. Make sure you only have the
pocket and front side of the T-shirt under your machine. You do
not want to sew the pocket through both sides of the T-shirt.
Start on one side of the pocket and sew around the edge of the
pocket. Get as close to the edge of the fabric as you can. For the
corners, lift the foot and leave the needle in. Rotate the fabric the
necessary amount. Continue sewing until you reach the other
side in the pocket. Your pocket should be sewn on with one
continuous seam. Do not sew the top of the pocket shut!
9.Enjoy your pocket T-shirt!
2
Thread the needle. Simply pull the thread through the
needle so that there is an equal length of thread extending
from both sides.
3
Tie a knot at the end of the thread. One way to tie a knot
is to wrap the thread around your finger as shown, roll the
thread between your fingers, and pull it tight. If you
doubled the thread, tie the ends together. Leave a long
tail of thread, whether you are doubling the thread or
using a single thread to sew the button.
4
Position the button on the fabric. Line the button up with
the other buttons on the garment. Also check the
buttonhole. Close the opposite flap or panel where you
want it and make sure that the button lines up with the
buttonhole.
5
Push the threaded needle up through the fabric and
through one hole in the button. Pull the thread all the way
through on each stitch
6
Place a straight pin. Place a straight pin beneath the button, between the stitch you have made
and where the next stitch will go, in order to keep the button from being stitched too tight. Then,
push the needle down through the next hole and through the fabric. Pull the thread all the way
through. It's best to hold the button in place so it does not move.
4/9
Design Folder Sustainable Design - Jane Doe (7DET8)
7
Restart the process. Bring the needle up through the first hole
again and pull the thread all the way through the fabric
9On the last stitch, push the needle through the material, but not
through a hole in the button.
10
Remove the straight pin.
11
Wrap the thread. Wrap the thread six times around the
thread between the button and the material to reinforce
the shank you have created.
12
13
5/9
Design Folder Sustainable Design - Jane Doe (7DET8)
14
Put the needle down through the fabric (position 1) and bring it
up 1/4 inch (6mm) away (position 2).
Pull the thread through up to the knot at the end. This is exactly
the same as sewing a running stitch.
You might choose 1/4 (6mm) long stitches the first time you
practice your backstitch and aim for 1/8 inch (3mm) stitches after
6/9
Design Folder Sustainable Design - Jane Doe (7DET8)
Finer fabrics will require smaller stitches than thicker fabrics such
as denim. When I need to sew really small stitches I use my craft
magnifying lamp to make them extra neat.
This is probably a little excessive for most projects but when I’m
photographing my work up close, I want to impress you! Just do
your best! Even if the stitches look a little uneven and wonky they
will be really strong.
Take a small backstitch in the fabric inserting the needle in the
same place you started. (Position 3 which is the same as position
1)
Because this is our first stitch, this means we will be inserting the
needle at the knot.
If your first stitch was 1/4 inch (6mm) then this means you will
bring the needle up 1/4 inch in front of the second stitch.
If you need really neat stitching you could even measure and
mark equal distances with a ruler. Don’t forget, the smaller your
stitches the stronger the seam will be.
\Step 3: Backstitch
STEP 4: PULL NEEDLE THROUGH
Pull the needle through to reveal your very first back stitch!
Step 4: Backstitch
STEP 5: REPEAT
Repeat all the way along your seam until you reach the end. This
means placing the needle in at first stitch and up at an equal
distance from the second stitch.
7/9
Design Folder Sustainable Design - Jane Doe (7DET8)
as neat as possible.
Backstitches
ALTERNATIVES TO BACKSTITCH
If you are having trouble with the back and forth motion of
backstitch, then substitute a running stitch. This is the easiest
hand stitch you could ever learn and is a simple up and down
motion. While not quite as strong, if you take small stitches you
will still get a great result.
Here you can see how running stitch looks different to backstitch.
Notice the gaps between stitches in the running stitch.
]
14 00m
Cutting list
# Material and Dimensions Quantity Needed for
2 botton 2 botton
8/9
Design Folder Sustainable Design - Jane Doe (7DET8)
...
Tools
# Name of Tool Quantity Needed for
1 button 2
2 -ruler 1
3 -tank top 1
4 Marking pen 1
Tread 2
Bag 1
9/9