Professional Documents
Culture Documents
CERTIFICATE
This is to certify that the work embodies in this project entitled “fabrication of
multipurpose sieving machine” being submited by Vikash Mishra (14ESHME029)
for partial fulfillment of the requirement for the award of “Bachelor of Technology
in Mechanical Engineering” discipline to “Rajasthan Technical University Kota
(Raj.)” during the academic year 2016-2017 is a record of bonafide piece of work,
carried out by him under my supervision and guidance in the “Department of
Mechanical Engineering”, Shrinathji Institute of Technology & Engineering,
Upli oden, Nathdwara (Raj.).
CERTIFICATE OF APPROVAL
The major project entitled “Development of fabrication of multipurpose sieving
machine” submitted by Vikash Mishra (14ESHME029) has been examined by us and is
hereby approved for partial fulfillment of degree “Bachelor of Technology in
Mechanical Engineering” for which it has been submitted. It is understood that by this
approval the undersigned do not necessarily endorse or approve any statement made,
opinion expressed or conclusion drawn here in, but approve the dissertation only for the
purpose for which has been submitted.
Date: Date:
DECLARATION
I hereby declare that this project is based on my original work expect for citation & quotation
which have been duly acknowledgement. I also declare that it has not been previously &
concurrently submitted for any other degree or awarded at Shrinathji Institute of Technology
and Engineering.
Name of Student
ACKNOWLEDGEMENT
We wish to express us deep sense of gratitude to words our guide Mr. Gajendra Singh
panwar (Assistance professor), Shrinathji institute of technology and engineering for his
guidance and encouraging support which were in valuable for the completion of this work.
Words are inadequate in offering our thanks to Mr.Yogesh Tamboli (Head Department of
Mechanical Engineering), Shrinathji institute of technology and engineering for his
encouragement and co-operation in carrying out the project work.
Our since thanks are due to Mr. I.V. Trivedi (Chief Adviser ) , Shrinathji institute of
technology and engineering and Mr. Jaydeep Ameta ( Director Administrative ) Shrinathji
institute of technology and engineering for their special support.
We take immense pleasure in thanking all the faculty members, staff members and our
colleagues for their valuable assistance in the project work.
We would like to express our special thanks to our family, friends and all those who helped
us directly or indirectly in completion of this project work.
Name of Student
Vikash Mishra(14ESHME029)
ABSTRACT
In the present era, constructions are one of the boons for the economic growth in any country.
A rapid change has taken place in this field from the past decades. Also time and cost are the
important aspects in the construction field. Various equipments are used during construction,
some are manually operated and some other power driven. If a trial has made in transforming
the manual operated equipment to a power driven, time can minimized in performing the
same operation. Among various manually operated equipments used in the construction field,
sand filtering equipment as a vital role and of more use.
In this project, attempt has made to fabricate a power driven multi- purpose sieving machine
for sand filtering in the construction field. Sieving machine is a machine used to separate the
fine sand from sand. The main application of this sieving machine is mainly in construction
filed. It is also used in packing of grains in industry and in flour mills. The main advantage of
this machine is to reduce the work of man who is working in construction filed, moreover it is
economical.
The main working principle of this machine is converting rotary motion of a given motor in
to reciprocating motion of a tray. It is also called screening machine. Initially design has been
done for sieving machine and then fabricated according to the design. The reciprocating
motion occurred to the mesh is basically a single slider crank mechanism. A mesh has fixed
to the reciprocating tray, upon which the sand grains are placed. During the reciprocating
process the fine grained sand is collected at the bottom and remaining sand is dumped into
the waste box.
LIST OF CONTENT
1 Certificate 6
2 Certificate of approval 66
3 Declaration 666
4 Acknowledgment 66
5 Abstract 6
6 List of content 66
7 List of Table 666
8 List of Figures 6666
9 Abbreviation 6
10 1 CHAPTER-1 1
11 1 Introduction 1
12 1.1 General 2
13 1.2 Sieving 2
14 1.3 Idea generation 3
15 1.4 Purpose of the project 3
16 1.5 Applications of multipurpose sieving machine 3
17 1.6 Advantage of the project 4
18 1.7 Objective of the work 4
19 1.8 Process plan 4
20 1.9 Flow Chart 5-6
21 1.10 Layout of the report 7
22 2 CHAPTER-2 8
23 2 Literature survey 9-10
24 3 CHAPTER-3 11
25 3 Multipurpose Sieving Machine 12
26 3.1 Specifications 12
27 3.2 Components overview 12
28 3.3 Shaft 13
29 3.4 Flywheel 14
30 3.5 Pulley definition 15-17
31 3.6 V belts 18
32 3.7 Motor 19
33 3.8 Bearings 20
34 3.8.1 Types of rolling contact bearings 21
LIST OF TABLES
SN. Table No. Title of Table Page No.
1 4.1 Chemical composition of mild steel 30
2 4.2 Physical composition of mild steel 31
3 4.3 Mechanical properties of mild steel 31
4 4.4 Range of welding cables 42
LIST OF FIGURES
SN. FIGURE NO TITLE PAGE NO.
1 1.1 flow chart of process planning 5-6
2 3.1 Shaft 13
3 3.2 Flywheel 14
4 3.3 Pulley 15-16
5 3.4 V Belt 17
6 3.5 Belt 18
7 3.6 Motor 19
8 3.7 Bearing 20
9 3.8 Caster wheels 22
10 3.9 Nut and bolt 23
11 3.10 Collecting sheet 24
12 4.1 Main frame 27
ABBREVIATION