Professional Documents
Culture Documents
Product Guide
ASME B30.5
Imperial 85%, Metric 85%
Features
• 22,7 t (25 USt) capacity • Tilt steering wheel
• 21,6 m (71 ft) four-section full-power boom • Load sensing hydraulic piston pump
• 13,6 t (15 USt ) deck carrying ability • Proportional hydraulic controls
GROVE GCD25
The new GCD25 is a 22 t (25 USt) capacity carrydeck crane, offering a four-section
21,6 m (71 ft) boom, four-wheel drive/four-wheel steer capability. It also has a four-
position pivoting boom head for low head room clearance and out and down
outriggers that can be setup in several modes depending on jobsite requirements.
Features
Best-in-class reach
A 5,1 m (17 ft) swingaway extension added to the 21,6 m
(71 ft) main boom provides an impressive 28,9 m (95 ft)
tip height with a capacity of 2268 kg (5000 lb).
Operator cab
Simple operator cab features hydraulic joystick controls,
tilt steering wheel and easy-to-set up graphic RCL system.
Also features 12 volt DC charging port, cup holder and
comfortable suspension seat. Optional enclosed cab
features split door design for additional comfort.
Options
• Convenience package includes pintle hitches and light
grilles
• Lighting package includes amber strobe light and boom-
mounted work lights
• Below-deck winch
• Air-conditioning
• RCL with Work Area Definition system
• K-100™ synthetic rope
Easy to transport
Exceptional capacity for its operational footprint. This compact
design offers the lightest overall GVW in its class to enhance
transportability.
Manitowoc Crane Care when you need it. Manitowoc Finance helps you get right to
The assurance of the world’s most advanced crane work generating profits for your business.
service and support to get you back to work fast. Financial tools that help you capitalize on
opportunity with solutions that fit your needs.
Table of contents
Dimensions..................................................................................................................................................................... 5
Load handling................................................................................................................................................................. 16
Specifications.................................................................................................................................................................. 18
Symbols glossary............................................................................................................................................................. 20
4
Dimensions and weights
m 1994 mm
1994 mm (78.50”)
(78.50”)
0° Boom Head
8794 mm
Boom Head 60° Boom Head 3484 mm 3484 mm (28' 10")
60° Boom Head (11’ 5”) (11’ 5”) 2655 mm
3484 mm (7' 10")
2076 mm
(11’ 5”) 7206 mm
m (81.73”) 1994 mm (23' 8")
(78.50”) 6139 mm 1067 mm
1994 mm (20' 2") (3' 6")
(78.50”) 5960 mm
30° Boom Head (19' 7")
Boom Head 80° Boom Head
80° Boom Head 931 mm 931 mm
1994 mm 1571 mm (3’ 0”) 22° (3’ 0”) 22° Optional
(78.50”) (61.85”) 931 mm 332 mm 332 mm 29 mm
1571 mm (3’ 0”) (1’ 1”) (1’ 1”)
Ground Plane Ground Plane (0' 1") Optio
22°
(61.85”) 332 mm 29 m
1677 mm 1677 mm (1’ 1”) 1371 mm Ground1372Plane
mm 1371 mm 1372 mm (0' 1
(5' 6")
60° Boom Head (5' 6") (4' 6") (4' 6") (4' 6") (4' 6")
3484 mm
1677 mm 1371 mm 2502 mm 1372 mm 2502 mm
(11’ 5”) (4' 6")
(5' 6") (8' 3") (4' 6") (8' 3")
2743 mm 2743 mm
2502
1994 mm (9' 0") (9' 0")
(78.50”) (8' 3")
4704 mm 2743 mm 4704 mm
(15' 5") (9' 0") (15' 5")
80° Boom Head 3033 mm 3033 mm 5005 mm 4704 mm 5005 mm
(9' 11") (9' 11") (16' 5") (15' 5") (16' 5")
931 mm
1571 mm
3033 mm (3’ 0”) 5310 mm 5005 mm 5310 mm O
(9' 11") 22°
(61.85”) 332 mm (17' 5") (16' 5") (17' 5") 2
(1’ 1”) Ground Plane
5310 mm
803 mm 803 mm
1677 1371 mm (17' 5") 1372 mm
(2' mm
8") 3310 mm (2' 8") 3310 mm
(5' 6") (4' 6") (4' 6")
(10' 10") (10' 10") 1677 mm 1677 mm
803 mm 2502 mm
(2' 8") (5' 6") (5' 6") (8' 3")
3310 mm
2218 mm 2218 mm (10' 10") 1677 mm 2743 mm
(7' 3") (7' 3") (5' 6") (9' 0")
4704 mm
2218 mm 1434 mm 1434 mm (15' 5")
(7' 3") (4' 8") (4' 8")
3033 mm 5005 mm
(9' 11") (16' 5")
1434 mm
Ground Plane (4' 8")
Ground Plane 5310803mmmm 803 mm
(2' 8")
(17' 5") (2' 8")
1817 mm 1817 mm
(6' 0") Ground Plane (6' 0") 803 mm 3162 mm 3162 mm 803 mm
2431 mm 2431 mm (2' 8") (10'3310
4")
mm
(10' 4") (2' 8")
(8' 0") 1817 mm (8' 0") (10' 10")mm
2409 2409 mm 1677 mm 2428 mm 2428 m
2495 mm (6' 0") 2495 mm (7' 11") 3162 mm (7' 11") (5' 6") (8' 0") (8' 0"
(8' 2") 2431 mm (8' 2") (10' 4")
2218 mm 1625 mm 1625 mm
(8' 0") 2409 mm (5' 4") 2428 mm (5' 4")
(7' 3")
2495 mm (7' 11") (8' 0")
(8' 2")
1434 mm 1625 mm
(4' 8") (5' 4")
2362 mm 2362 mm
(7' 9") 129 mm (7' 9") 129 mm
803 mm
Ground Plane
2457 mm (0' 5") 2457 mm (0' 5")
(2' 8")
(8' 1") (8' 1")
1817 mm 4915 mm 2362 mm 4915 mm
(6' 0") 3162 mm
(10' 4") (16' 2") (7' 9") (16' 2") 129 mm
2431 mm 2457 mm (0' 5")
(8' 0") 2409 mm (8' 1") 2428 mm
2495 mm (7' 11") 4915 mm (8' 0")
(8' 2") (16' 2") 1625 mm
(5' 4")
2362 mm
(7' 9") 129 mm
2457 mm (0' 5")
(8' 1")
4915 mm
(16' 2")
Grove GCD25 5
Dimensions
Dimensions
Tire size A B C D E A B C D E
8593 mm 6178 mm 5556 mm 5337 mm 3813 mm 7062 mm 4828 mm 4454 mm 4109 mm 2422 mm
17.5 x 25 (338.3 in) (243.2 in) (218.7 in) (210.1 in) (150.1 in) (278.0 in) (190.1 in) (175.4 in) (161.8 in) (95.3 in)
Two-wheel steer (radius) Four-wheel steer (radius)
A A
Boom Carrier
clearance clearance
C
Curb
clearance D
Outside turn
radius E
Inside turn
radius
Weights
GVW Front Rear
kg lb kg lb kg lb
Basic machine: including 21,6 m (71.0 ft) main boom, hoist
with 119,0 m (390 ft) of wire rope, 22,6 t (25 USt) hook block, 20 623 45,465 10 115 22,299 10 508 23,166
counterweight, Tier 4 engine, and driver.
Add: Enclosed cab with heater and defroster. 106 233 47 104 59 129
Crane weight 20 729 45,698 10 162 22,402 10 567 23,296
6
Working range
Imperial 85%
96
tension
92
88
ex
ith 17 '
84
70.5' w
80
76
oom
70.5' b
72
68
64
om
59' bo
60
52
m
47' boo
48
80˚ 75˚ 44
70˚
65˚
60˚ 40
m
55˚
35' boo
50˚ 36
45˚
40˚ 32
35˚
28
30˚
25˚ 24
oom
20˚ 20
23.0' b
15˚
16
10˚
12
5˚
0˚ 8
0
8 4 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Grove GCD25 7
Load chart
Imperial 85%
ft 23 35 47 59 70.5 ft 23 35 47 59 70.5
50,000 34,300 33,600 26,350 24,000 21,900
8.5
(64.5) (73.5) (78.5) – – 8.5 – –
(63.5) (73) (78)
38,750 34,500 33,000 27,800
10
(60) (71) (76.5) (80) – 10
20,800 19,300 17,900 16,650
–
(59) (70.5) (76) (79.5)
34,850 31,400 29,250 25,900
12
(54) (67) (74) (78) – 12
16,000 15,100 14,200 13,350
–
31,250 28,450 26,350 24,100 18,200 (52.5) (67) (73.5) (77.5)
14
(47) (63.5) (71) (76) (79) 12,300 12,250 11,600 11,000 10,500
14
26,700 26,050 24,000 22,400 16,750 (45.5) (63) (71) (75.5) (79)
16
(39) (59.5) (68.5) (74) (77.5)
9850 10,150 9710 9280 8870
23,150 23,500 22,100 20,750 15,500 16
18 (37) (59.5) (68.5) (73.5) (77)
(29) (55.5) (66) (72) (75.5)
21,000 21,350 20,900 19,550 14,650 18 8070 8370 8230 7910 7590
19.5 (26) (55.5) (65.5) (71.5) (75.5)
(0) (52) (63.5) (70.5) (74.5)
18,450 18,600 17,850 13,400 19.5 7090 7300 7330 7060 6810
22 – (46) (60) (67.5) (72) (0) (52) (63.5) (70) (74)
16,550 16,750 16,300 12,500 5900 6050 5900 5720
24 – (41) (57) (65) (70.5) 22 – (46.5) (60) (67.5) (72)
14,600 14,850 14,200 11,750
26 – (36) (54) (63) (68.5) 5040 5170 5150 5000
24 – (41.5) (57) (65) (70)
12,750 13,050 13,150 11,050
28 – (29) (51) (60.5) (67) 4330 4450 4520 4400
26 – (36) (54) (63) (68.5)
11,250 11,600 11,700 9800
30 – (20) (47.5) (58.5) (65.5) 3740 3850 3930 3880
10,300 10,650 10,750 9400
28 – (29) (51) (60.5) (66.5)
31.5 – (0) (45) (56.5) (64)
3250 3340 3410 3420
34 – – 9350 9480 8850 30 – (20) (47.5) (58.5) (65)
(40) (53.5) (61.5)
8460 8590 8400 2910 3010 3080 3120
36 – – (36) (51) (60)
31.5 – (0) (45) (56.5) (63.5)
7680 7830 7940 2530 2590 2640
38 – – (31) (48.5) (57) 34 – – (40) (53.5) (61)
7000 7150 7270
40 – – (25) (45.5) (55) 36 – –
2200 2260 2310
(36) (51) (59)
6400 6550 6680
42 – – (17.5) (42.5) (53) 1910 1960 2010
38 – – (31) (48.5) (57)
6000 6000 6270
43.5 – – (0) (40.5) (51.5) 1660 1700 1750
5440 5680
40 – – (25) (45.5) (55)
46 – – – (36) (48.5)
1410 1470 1510
5040 5250 42 – –
48 – – – (32.5) (46.5)
(17.5) (42.5) (53)
1230 1310 1350
50 – – –
4680 4860 43.5 – – (0) (40.5) (51.5)
(28) (44)
4350 4510 1070 1110
52 – – – (23) (41.5) 46 – – –
(36) (48.5)
4040 4190
54 – – – (16) (38.5) 48 – – –
890 930
(32.5) (46.5)
3820 3960
55.5 – – – (0) (36.5) 720 780
50 – – – (28) (44)
3620
58 – – – – (32.5) 570 630
3370
52 – – – (23) (41.5)
60 – – – – (29) 430 500
3130 54 – – – (16) (38.5)
62 – – – – (25)
330 410
64 – – – –
2920 55.5 – – – (0) (36.5)
(20)
2720 270
66 – – – – 58 – – – – (32.5)
(13)
2620 NOTE: ( ) Boom angles are in degrees. 80088569
67 – – – – (0)- S/N
GCD25
NOTE: ( ) Boom angles are in degrees. 80088568
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
8
Load chart
Imperial 85%
ON OUTRIGGERS FULLYpounds
EXTENDED - 360°
NOTES:
NOTES: 1. 17 ft boom extension may be used for single line lifting service only.
2. WARNING:
1. 17 ft. boom extension may beOperation
used for ofsingle
this machine with service
line lifting heavier loads
only.than the
capacities listed is strictly prohibited. Machine tipping with boom
2. WARNING: Operation of this
extension machine
occurs rapidly with heavieradvance
and without loads than the capacities listed is strictly prohibited. Machine tipping
warning.
with boom extension occurs rapidly and without advance warning.
GCD25 - S/N 7
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Grove GCD25 9
Load chart
Imperial 85%
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
10
GCD25 - S/N 8
Working range
Metric 85%
29.3
ion
extens
28,1
m
26,8
with 5,1
25,6
21,5 m
24,4
23,2
boom
22,0
21,5 m
20,7
boom
19,5
18,0 m
17,1
boom
15,9
14,3 m
14,8
60˚ 12,2
55˚
50˚
10,7 m
11,0
45˚
40˚ 9,8
35˚
8,5
30˚
7,3
boom
25˚
20˚ 6,1
7.0 m
15˚
4,9
10˚
3,7
5˚
0˚ 2,4
1,2
0
2,4 1,2 0 1,2 2,4 3,4 4,9 6,1 7,3 8,5 9,8 11,0 12,2 13,4 14,6 15,9 17,1 18,3 19,5 20,7 22,0 23,2 24,4 25,6
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Grove GCD25 11
Load chart
Metric 85%
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
12
Load chart
Metric 85%
kilograms - 360°
ON OUTRIGGERS FULLY EXTENDED
NOTES: NOTES:
1. 5.2 m boom1.extension
5,2 m boom extension
may be usedmay be used
for single forlifting
line singleservice
line lifting service only.
only.
2. WARNING:2.Operation
WARNING: ofOperation of this
this machine withmachine
heavierwithloadsheavier
than theloads than the
capacities capacities
listed listed
is strictly is
prohibited. Machine tipping
strictly prohibited.
with boom extension Machine
occurs rapidly andtipping
without with boomwarning.
advance extension occurs rapidly and without
advance warning.
GCD25 - S/N 7
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Grove GCD25 13
Load chart
Metric 85%
6,1 4290 2620 5.All rubber lifting depends on proper tire infla-
tion, capacity and condition, Capacities must
6,7 3655 2210
be reduced for lower tire inflation pressures,
7,3 3155 1875 Damaged tires are hazardous to safe opera-
7,9 2740 1595 tion of crane,
8,5 2400 1355 6.For pick and carry operation, the boom,
9,1 2115 1150 using the shortest practical boom length,
must be centered over front of machine,
9,8 1870 975 Maximum speed is 4,0 km/h,
10,4 1660 825
7.On rubber lifting with boom extension not
11,0 1475 690 permitted,
11,6 1315 575
12,2 1170 470
12,8 1040 375
13,4 1030 325
14,0 930 275
14,6 830 225
15,2 745 175
15,0 670 125
16,5 595 –
17,1 550 –
17,7 485 –
18,3 430 –
18,9 380 –
19,5 330 –
20,1 280 –
20,4 255 –
80090347
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
14
Transportation and lifting data
NO. / UNIT
TIE DOWN
TIE DOWN
PURPOSES OTHER THAN THOSE DESIGNATED ON CHART
FITTING
TOW
LIFT
IS PROHIBITED. FITTING CAPACITIES ARE MAXIMUM
ALLOWABLE LOADS PER INDIVIDUAL FITTING.
LIFT LIFT LIFT TOW FORE
& AFT SIDE DOWN
2. RIGGING PERSONNEL SHALL BE RESPONSIBLE FOR
PROPER SELECTION AND PLACEMENT OF ALL SLINGS 9,1 27,2 27,2 0,9 27,2
AND LOAD HANDLING DEVICES. A 4 X X X
[10] [30] [30] [1] [30]
3. DIMENSIONS AND WEIGHTS SHOWN ARE ESTIMATED FOR
LARGEST CONFIGURATION AVAILABLE. WEIGHTS DO NOT
B 4 X 1,8
INCLUDE BOOM EXTENSION AND OR JIB, UNLESS [2]
OTHERWISE INDICATED.
4. RIGGING PERSONNEL SHALL VERIFY DIMENSIONS AS 0,9
C 1 X [1]
REQUIRED FOR CLEARANCE.
5. DO NOT USE COUNTERWEIGHT LIFT LOCATIONS OR BOOM 0,9
SLING POINT FOR LIFTING OR TIE DOWN OF ENTIRE CRANE. D 1 X [1]
6. LIFTING OF THE COUNTERWEIGHT TO BE ACCOMPLISHED
WITH A PROPERLY RATED 1/2 INCH EYEBOLT.
C 8794 mm
D (346.2")
C.G.
G.V.W. 22 083 kg 1389 mm
(48,684 lb) (54.7")
5309 mm
3343 kg C.G. 3333 mm
BOOM WEIGHT (7369 lb) (209")
(131.2") TOTAL UNIT (W/ BOOM EXTENSION) 80048584
AREA 1
13 610 kg
(30,000 lb)
OR
AREA 2
6805 kg
(15,000 lb)
1. Maximum travel speed with any or all loads – 4,0 km/h (2.5 mph)
2. Loads to be transported on smooth level firm surfaces only.
3. Boom must be retracted and in center forward position, and lowered as much as the load allows.
4. Pick and carry loads may be transported on either Deck Area 1 or Deck Area 2; combined loading of
Deck Area 1 and Deck Area 2 not permitted.
5. Lifting is not permitted when carry deck is loaded except for loading and unloading carry deck.
6. The maximum pick and carry loads may be transported on Deck Area 1 provided the load is centered
over the front axle and cribbed directly on the frame rails.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
WEIGHT REDUCTIONS FOR LOAD HANDLING DEVICES
Grove GCD25 15
5,2 m (17 ft) FIXED OFF EXTENSION HOOK BLOCKS and HEADACHE BALLS:
1. Maximum travel speed with any or all loads – 4,0 km/h (2.5 mph)
2. Loads to be transported on smooth level firm surfaces only.
3. Boom must be retracted and in center forward position, and lowered as much as the load allows.
Load handling
4. Pick and carry loads may be transported on either Deck Area 1 or Deck Area 2; combined loading of
Deck Area 1 and Deck Area 2 not permitted.
5. Lifting is not permitted when carry deck is loaded except for loading and unloading carry deck.
6. The maximum pick and carry loads may be transported on Deck Area 1 provided the load is centered
over the front axle and cribbed directly on the frame rails.
5,2 m (17 ft) FIXED OFF EXTENSION HOOK BLOCKS and HEADACHE BALLS:
*Stowed - N/A 22,7 t (25 ton), 2 sheave hook block 215 kg+ (475 lb+)
*Erected 508 kg (1120 lb) 5,7 t (6.25 ton) headache ball 48 kg+ (105 lb+)
*Reduction of main boom capacities +Refer to rating plate for actual weight.
When lifting over swingaway and/or jib combina- NOTE: All load handling devices and boom attach-
tions, deduct total weight of all load handling ments are considered part of the load and suitable
devices reeved over main boom nose directly allowances MUST BE MADE for their combined weights.
from swingaway or jib capacity. Weights are for Grove furnished equipment.
LIFTING SERVICE,
SIZE GENERAL TRAVEL &
LOAD
(FRONT LOAD EXTENDED TRAVEL
SPEED
& RANGE
INDEX STATIC, CREEP &
REAR)
4,0 km/h (2.5 mph)
OTR 17.5x25
20 PR ----- 7,6 (110)
E3/L-3
GCD25 - S/N 11
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
16
Load handling
LIFTING AREA DIAGRAM
SIDE
15° 15°
30° 30°
FRONT REAR
SIDE
If synthetic rope is installed on the hoist, the following capacity reductions apply:
PERMISSIBLE NOMINAL
HOISTS CABLE SPECS.
LINE PULLS CABLE LENGTH
The approximate weight of 16 mm (⁄”) wire rope is 1,1 kg/m (0.72 lb/m).
The approximate weight of 18 mm synthetic rope is 0,24 kg/m (0.16 lb/m).
*With certain boom and hoist tackle combinations, the allowable line pull may be
limited by hoist performance. Refer to Hoist Performance table for lift planning to
ensure adequate hoist performance on drum rope layer required.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Grove GCD25 17
Specifications
Carrier (cont’d)
Brakes
Hydraulic actuated internal wet-disc service brake acting on all four
Fuel tank capacity wheels. Dash mounted toggle switch with light for activating or release of
189 L (50 gal) the dry disc parking brake mounted on the transmission output yoke.
DEF (diesel exhaust fluid): 19 L (5 gal)
Tires
Transmission Standard: 17.5 x 25 bias
Powershift with four speeds forward and three speeds reverse. Stalk
Optional: 17.5R25 radials
mounted direction shifter with rotary gear selection.
Oscillation lockouts
Manual switch to engage and disengage the rear axle lockouts. Engage
when lifting on rubber and in crab steer mode, disengage to allow
oscillation when traveling over rough terrain.
Extension
Boom extension Insert Steering
20
Notes
Grove GCD25 21
Notes
22
Notes
Grove GCD25 23
Manitowoc Cranes
Regional headquarters
Americas Europe, Middle East, Africa China Greater Asia-Pacific
Manitowoc, Wisconsin, USA Dardilly, France Shanghai, China Singapore
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Tel: +65 6264 1188
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Fax: +65 6862 4040
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062
Manitowoc Crane Care when you need it. Manitowoc Finance helps you get right to
The assurance of the world’s most advanced crane service and work generating profits for your business.
support to get you back to work fast. Financial tools that help you capitalize on opportunity with
solutions that fit your needs.