Professional Documents
Culture Documents
BUTTERFLY VALVES
FM725G FM725
GENERAL VALVES
Features & Benefits • Rugged construction: Ductile
• Manufactured to Iron Body for all sizes
BS EN 593: 2009 • Stainless Steel disc as standard
• Complies with Pressure • Epoxy paint coated as standard
Equipment Directive 97/23/EC • Low operating torques
• Suitable for Gearbox • Double regulating features
or Actuator operation on gearboxes
ØM
1 H
2 Screw Carbon Steel ASTM A194 Gr.2H
I
2
ØB
5
P
5 Upper Shaft Stainless Steel ASTM A276 420 7
G
10
7 Long Bushing - PTFE
8 Seat + Backing Ring - EPDM + Aluminium
C°
9 Disc Stainless Steel ASTM A351 CF8M
10 Pin Stainless Steel ASTM A276 431
ØL
ØE 13
Kv Values
SIZE DISC POSITION ( ˚ )
(mm) 10 20 30 40 50 60 70 80 90
700 31 1568 3148 5740 8650 12931 19695 30187 42818
800 39 2065 4144 7557 11927 17830 27157 41621 33086
900 225 2638 5821 11020 17490 28113 45413 68854 75688
PRESSURE RATING: DN700 - DN900 PN16 END CONNECTIONS: Flanges to BS EN 1092 PN16
TEMPERATURE RATING: -20°C to 120°C ACTUATOR MOUNTING FLANGES: ISO 5211: 2001
Valid as of 060215
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or
omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.