Professional Documents
Culture Documents
net/publication/326096965
Nonwovens
CITATIONS READS
0 6,938
2 authors:
Some of the authors of this publication are also working on these related projects:
All content following this page was uploaded by Awais Khatri on 01 July 2018.
CONTENTS
10.1 Introduction...............................................................................................271
10.2 Market Overview and Application........................................................272
10.3 Nonwoven Technology............................................................................274
10.3.1 Raw Materials..............................................................................274
10.3.2 Web Formation Methods............................................................275
10.3.3 Web Bonding Methods...............................................................276
10.3.4 Finishing Methods......................................................................278
10.4 Composite Nonwovens............................................................................279
10.5 Characterization of Nonwovens.............................................................280
10.6 Testing of Nonwovens..............................................................................281
10.6.1 Dimensional Properties..............................................................281
10.6.1.1 Fiber Segment Orientation Distribution.................281
10.6.1.2 Pore Size Distribution................................................282
10.6.1.3 Fabric Uniformity.......................................................282
10.6.2 Mechanical Properties................................................................282
10.6.3 Wetting and Liquid Absorption................................................283
Bibliography.........................................................................................................283
10.1 Introduction
Nonwoven fabrics represent the third group of fabric forms after woven and
knitted. According to the American Society for Testing Materials (ASTM D
1117-80) “a nonwoven is a textile structure produced by the bonding or inter-
locking of fibers, or both, accomplished by mechanical, chemical, thermal or
solvent means and combinations thereof.” A nonwoven fabric is a porous
felt or sheet of oriented or random fibers merged by chemical adhesion,
mechanical needle punching, and thermal fusion. One of the key benefits
of nonwoven construction is that it is generally fabricated in a single con-
tinuous process directly from the fibrous materials to the finished product.
271
272 Advanced Textile Testing Techniques
Moreover the high production rate and low labor cost prompt the invention
of novel nonwoven products. Nonwoven fabrication methods can produce
a wide range of unique characteristic fabrics. Suitable fibrous materials, web
formation, bonding agents, and finishing treatments of nonwovens can alter
their wide range of properties. The exceptional features of nonwoven fab-
rics make them ideal for numerous day-to-day applications. Nonwovens can
be engineered into medical textiles, geotextiles, and insulation and filtration
media supplies.
retail value during recent years. Personal care wipes, baby wipes, and cos-
metic wipes have topped $8 billion in recent years.
Nonwoven filtration media have shown continuous growth driven by cus-
tomer demand for clean air and drinking water as well as increased fuel effi-
ciency in vehicles and infrastructural improvements. According to the data
released by INDA the nonwoven filtration market grew from $3.5 billion
in 2014 to $4.6 billion in 2019. Needle punched fabrics are on the path of
growth and global producers in the market are optimistic about the future.
According to the recent estimation by EDANA, needle punched fabrics were
among the top products in Europe in the year 2014. The data also show that
the needle punching process grew by 9.1% from 2013 to 2014.
The production of spun laced, wet laid, and laminate nonwoven films, pri-
marily used in surgical gowns, drapes, and sterile tray wraps, were products
gaining in demand in the United States. These high-end products tend to
prevent potential blood-and alcohol-borne pathogens from coming in contact
with surgical staff and reduce small particle contamination of the surgical
site by staff and the environment. According to the data published by INDA,
the fast production rate means that the medical nonwovens market is fore-
cast to grow by 4% per year from 271,000 tonnes in 2012 to 332,000 tonnes in
2017. There is also considerable growth forecast in the area of nonwoven film
laminates. Furthermore, current trade and industry developments in China
promote the production of nonwovens for filters and disposable medical
textiles. With respect to customer requirement, China maintains standards
that encourage the individual to purchase convenient items, promoting the
increased production of disposable products. According to the latest 2016
report by INDA, banana-fiber-based hygiene products, facial exfoliating
cushions, and stretchable adhesives for disposable wear are top of the novel
nonwoven products.
Japan is one of the leading producers of hygienic baby diapers. The pro-
duction volume of these increased significantly between 2012 and 2015.
Total production increased by 2.8% to reach 14.7 billion units. The growth of
baby diapers shows a growing export business of 246,000 tonnes. The largest
percentage of Japanese diapers is exported to China and represents 165,000
tonnes. Japanese diapers tend to be of higher quality than Chinese ones of
export quality. Consequently, many Chinese buyers choose Japanese-made
diapers even though they are more costly. On the other hand, India has shown
a high production rate of baby diapers, disposable wipes, and hygiene prod-
ucts in recent years. The growing rate of disposable hygiene products in India
is expected to exceed China by 2035. The growing market demand for sanitary
and hygiene products in India offers a very promising rise in the future of the
nonwovens industry. According to data released by INDA, production lines of
needle punched nonwovens, installed in May 2014, represent 50 crore INR of
total investment with a target to exceed 100 crore INR over the next 3 years.
Nonwoven automotive products in North America have been substan-
tially increased due to the amount of nonwovens going into vehicles.
274 Advanced Textile Testing Techniques
However, North America has lagged behind Europe where green technol-
ogy fuel and green energy recyclability have been regulated by government.
Automotive nonwovens are 15%–30% lighter than conventional materials
and reduce the weight of a vehicle by 2 kg, resulting in 30% less impact on
the environment.
10.3 Nonwoven Technology
10.3.1 Raw Materials
Fundamentally all organic and nonorganic fibers and filaments are used in
nonwoven fabric manufacturing. The selection of fibrous materials depends
on the required properties of the fabric, the cost factors, and the demands
of further manufacturing. Cotton is one of the most widely used materials
for nonwoven baby diapers, baby wipes, and hygiene products. The recent
explosion in the diversification of sanitary nonwovens has spurred interest
in cotton as a valuable, natural, and sustainable component fiber. Cotton
nonwovens were exclusively made from combing waste, to produce soft and
absorbent fabrics with good bulk and bonding properties.
The huge application of nonwovens to cleaning purposes, wound dress-
ings, and filtration media has regenerated the demand for manmade fibrous
materials so that they now hold the major share. Spun laced viscose rayon
is extensively used in hygiene and medical applications, due to its being
highly moisture absorbent, soft, and biodegradable. Dull, high bulk, soft,
and absorbent viscose rayon are aimed at medical and hygiene purposes.
Their low cost, ease of processing with all types of web formation, and web
bonding methods make them an ideal choice for fabrication. For filtration
of hot, saturated, and volatile materials, coarse denier (more than 40 denier)
viscose rayon filaments are used and recommended for gravity filtration.
Viscose filtration products are biodegradable, cost effective, can hold a high
liquid capacity, and are resistant to coolant continuants. Acetate multilayered
lofted structures with a continuous fibrous matt are highly recommended
for acoustic damping, absorbent cores, thermal insulation, and wound care
applications. In synthetic fibers, polyester is most widely used for the fabri-
cation of tea bags and sanitary and filtration purposes. Due to the low cost
and high suitability for many product applications, polyester filaments and
staple cut fibers are generally used for polyester tapes in electrical applica-
tions. Polypropylene also represents a major segment in durable products
such as floor coverings, geotextiles, hygiene disposal, and needle punched
geotextiles. Polyamide holds a 20%–25% part in nonwovens for interlinings.
Figure 10.1 shows sections of the applications of nonwoven fabrics for dif-
ferent end uses.
Nonwovens 275
5.9%
1.5% 4.6% 7.2%
Hygiene products
2.2%
Durable nonwovens
6.6%
Disposable nonwovens 19.7%
Medical 1.1%
Table top
Food pads
Wipes (other)
Wipes (industrial) 13.1%
Wipes (personal) 2.9%
Diapers
Adult incontinence
35.1%
FIGURE 10.1
Sections of the applications of nonwoven fabrics for different end uses.
Dry-laid web formation is one of the old techniques and is very similar to the
felting process. For the production of dry-laid web, carding machines and
web lappers are used to layer the fibrous batt. The fibrous web layers are sub-
sequently felted using heat, moisture, and agitation. The dry-laid web forma-
tion technique, such as fiber preparation, blending, carding, and garneting
are innovations of the textile industry. These processes prepare staple fibers,
blend them, and layer the fiber batt in a dry state. In dry-laid web formation,
the fibers are collected into a web form by parallel lapping, cross-lapping, or
aerodynamic (air laid) lap forming and then bonded by means of mechani-
cal needles, hydro-entanglement, chemical adhesives, and thermal bonding
methods. The simple way of fabricating a nonwoven web is by the parallel
lapping of carded webs. In this method, several carded webs are layered over
each other to form the fibrous batt structure. In this procedure, the mass per
unit area of the batt can be increased by laying several webs over each other.
A parallel-laid web formation system is extensively used in the production
of fleeces for relatively light weight adhesive bonded fabrics used for clean-
ing cloths and hygienic products. The production setup for dry-laid webs
is raised slightly above floor level to permit the working of the conveyor
276 Advanced Textile Testing Techniques
Wind up
FIGURE 10.2
A schematic illustration of dry-laid web formation.
belt to pass underneath. The consecutive webs fall onto the conveyor lattice
forming a batt with a condensed web. In the cross-laying method the card-
ing machines are placed at right angles to each other to the main conveyor.
The carding web moves transversely across the main conveyor belt, which
moves to form a zigzag design sheet formation. These kinds of webs have
high stress dispersion abilities as compared to the parallel style web form-
ing system. Moreover, only a few zigzag layers can produce lighter weight
fabrics with high stress recovery. An air-laid web forming system utilizes
the air current dispersing method to lay and blend man-made fibrous webs.
Very low weight fabrics with dimensional stability can be fabricated by this
method. Usually a very low amount of binder is required to bind air-laid
webs. Figure 10.2 shows a schematic illustration of dry-laid web formation.
The wet-laid web forming system is designed to fabricate short fibers
dispersed in liquid, which are subsequently layered. Figure 10.3 shows a
schematic illustration of wet-laid web formation. The wet-laid method is
specifically suitable for the large scale production of disposable products,
such as tea bags, aprons, gloves, napkins, and surgical gauze.
Polymer-laid or spun laced nonwoven webs are fabricated directly by
polymer extrusion. In the basic polymer-laid method, sheets of synthetic fila-
ments are polymer extruded and delivered onto a moving conveyor belt to
form a randomly oriented continuous filament web. Figure 10.4 shows a sche-
matic illustration of spun-laid web formation. Polymer-laid webs are used
in a variety of applications including surgical packs and gowns, wipes and
sponges, chemical barriers, and protective clothing. The spun laced method
was first successfully commercialized by Dupont in the United States.
Long Water
fibers
Wood
pulp
Wind up
Binder impregnation
Web
formation
Drying with hot rollers
FIGURE 10.3
A schematic illustration of wet-laid web formation.
Polymer
chips feed
Extruder Liquid
polymer feed
Extrusion die
Filament attenuator
cooling and stretching
Wind up
Web laydown Calendar roller bonding
FIGURE 10.4
A schematic illustration of spun-laid web formation.
cross-laid webs by means of a warp stich. The machinery used in stich bond-
ing is the modified form of warp knitting machine, which binds the fibrous
layers by knitting columns of stitches.
Chemical bonding involves the application of chemical adhesives by
means of complete saturation, spraying, printing, power, and foaming meth-
ods. There should be an adequate compatibility between adhesives and
fibers. Usually the same polymeric materials are used to bind fibers having
the same chemical formula. The chemical bond is the effect of physical and
chemical forces that act as a boundary layer between the two polymers.
Thermal bonding utilizes thermoplastic and filaments to melt and fuse them
together by means of heat and pressure. Bi-component filaments are used to
bond webs where one component acts as a thermoplastic to facilitate thermal
bonding while the other acts to enhance the quality of the required end product.
10.3.4 Finishing Methods
A variety of finishing treatments are used to incorporate softness, drab abil-
ity, absorbency, water repellency, flame retardancy, and UV absorption.
Nonwovens 279
10.4 Composite Nonwovens
Composite nonwovens are the most important form of textiles and have a
significant role due to their facile fabrication techniques. A composite nonwo-
ven is a superficial method of coalescing system of divergent webs to obtain
precise and unique functional properties. This system provides unique char-
acteristics, such as mechanical stability, heat resistivity, thermal conductiv-
ity, antimicrobial activity, and interlaminar shearing force stability, which is
impossible with only one kind of web system. The simplest way to form a
nonwoven composite structure is to bond two or more webs in a laminating
line. The webs are bonded to each other by means of hot melted glue or latex
adhesives. In some cases, electrostatic forces or Van der Waals forces or elec-
trostatic attraction is sufficient to hold different fibrous layers to obtain the
required nonwoven composite structure. Moreover, different webs are taken
off separately unwound strands before being finally wound onto a single
wind up stand. Needle punching, hydroentanglement, and stich bonding are
the ways to fabricate a nonwoven composite structure. Usually such a struc-
ture is hydroentangled with a scrim material. The scrim is usually a woven
textile material, sandwiched between two nonwoven webs. Figure 10.5
shows the morphology of a nonwoven composite layered structure formed
Cotton web
Polyester web
FIGURE 10.5
The morphology of a nonwoven composite layered structure formed by polyester and cotton webs.
280 Advanced Textile Testing Techniques
by polyester and cotton webs. This method provides extra strength to a non-
woven composite structure. Polypropylene, polyester, polyethylene, and
nylon are the most widely used to combine with organic and inorganic fibers
for maximizing the functionality of a composite structure. The application
of these forms of nonwovens is expected to have high demand, exclusively
in technical textiles, that is, automotive textiles, households, building and
construction reinforced materials, and surgical and filtration applications.
For the facilitation of nonwoven composites, cost saving in processing and
raw materials must be carried out so as to be able to fabricate advanced
composite structures for versatile application in the current market. In this
way, novel nonwoven composites will gain widespread recognition in the
future market.
10.5 Characterization of Nonwovens
Nonwoven fabrics are bonded together by means of chemical, thermal, or
frictional methods. The characterization of nonwovens is essential for analyz-
ing the types, size, shape, rigidity, and density of bond structure. The bond
structure is characterized in two ways: rigid solid bonds and flexible elastic
joints. For this purpose, the choice of bond structure depends on the norm
of manufacturing processes and end use application. In needle punched or
hydroentangled nonwoven fabrics, the bond is formed by interconnectivity
of fibrous layers. In needle punched fabrics, the bonds are flexible and essen-
tial fibers are capable of interchanging with the bonding limits. The extent of
the bonding points is affected by the fabrication process, that is, the depth
of needle barb penetration relative to fiber thickness, size of needle, total
number of needles that stab into the web, and punch density. In this case,
bond points depend on the fluid jets, specific energy, and number of injec-
tors. However, in chemically bonded fabrics, the fibrous layers are bonded
by means of surface adhesion or cohesion of polymers, in which the small
proportion of fiber matrixes are bonded and restricted to move only with the
bonding points. Bonding points depend on the method of binder applica-
tion, that is, print bonding, spray bonding, powder bonding, or saturation
bonding. Thermoplastic filament spun laced nonwoven fabrics are fabricated
via the melting of polymers. In this case, bonds are formed at fiber cross-
over points; as a result fibers associated with melting polymer surfaces can-
not move independently. The bond point area, land area, pressure, and the
size of adhesive units determine the nature of bonding points. Stich bonded
nonwoven fabrics are stabilized by a warp knit yarns through the fibrous
layers. In this way, the bonding units are bendable and joined by yarns and
fibers. The nature of solid bond points in nonwoven fabrics can be physically
characterized by the tensile properties, tearing and tensile strength, elasticity,
Nonwovens 281
10.6 Testing of Nonwovens
Numerous testing systems and procedures have been established for the
characterization of nonwoven fabrics:
The standards testing system for nonwovens are defined as appropriate test-
ing methods developed for reproducibility and considered to offer reliable
results with precise control for use in the exchange of nonwoven goods.
Industrial test methods are typically designed for routine characterization
that deals with the assessment, benchmarking, and quality control of the
semi-finished end product.
10.6.1 Dimensional Properties
The dimensional properties of nonwoven fabrics are often characterized in
relation to fiber orientation distribution, pore size distribution, and fabric
uniformity.
10.6.1.3 Fabric Uniformity
Fabric uniformity is the consistency of web thickness over a specified area. It
can also be elucidated as the variation of the weight or density of the nonwo-
ven fabric calculated directly by taking the specimen from different sections
of the fabric. The difference in uniformity depends on the specimen size and
weight. Therefore, to investigate the uniformity of nonwoven fabric, varia-
tion in optical density, the gray level intensity of the fabric, and electromag-
netic ray absorption systems are considered.
10.6.2 Mechanical Properties
Mechanical properties such as tensile strength, bending, rigidity, compres-
sion, and stiffness demonstrate the functionality of nonwoven fabrics. The
mechanical properties of nonwovens are tested by machine direction, cross-
direction, and bias direction. Numerous testing systems are recognized for
the analysis of mechanical properties of nonwovens. Generally, strip and
grab tests are used for analysis. In grab test methods, the central width of the
specimen is clamped by jaws at a fixed distance. The specimen extends out-
side the jaws’ width. According to the standard test method, the width size of
the nonwoven sample is 100 mm, whereas the clamping width in the central
section of the fabric is 25 mm. The fabric is stretched at a rate of 100 mm/min
(ISO standard) or 300 mm/min (ASTM standard). The discrete distance of
two clamps is 200 mm (ISO standard) or 75 mm (ASTM). Nonwoven fabric
samples typically contribute a maximum force before rupture occurs in the
web layers. In the strip test, the fabric specimen is held between two clamps.
In this case, the specimen width is 50 mm (ISO standard) or 50 mm (ASTM
standard), though the stretch rate and clamp distance will be kept the same
as in the grab test.
Nonwovens 283
Bibliography
Agarwal, B. D., L. J. Broutman, and K. Chandrashekhara. Analysis and Performance of
Fiber Composites. John Wiley & Sons, Wiley Publishers, Hoboken, NJ, 2006.
Albrecht, W., H. Fuchs, and W. Kittelmann. Nonwoven Fabrics: Raw Materials, Manufacture,
Applications, Characteristics, Testing Processes. John Wiley & Sons, Wiley Publishers,
Hoboken, NJ, 2006.
Berman, M. H. S., D. D. Doshi, and T. F. Gilmore. Nonwoven continuously-bonded
trilaminate. Google Patents, 1989, U.S. Patent No. 9,572,721.
Bhat, G. S. and S. R. Malkan. Extruded continuous filament nonwovens: Advances in
scientific aspects. Journal of Applied Polymer Science 83(3) (2002): 572–585.
Butin, R., J. Harding, and J. Keller. Non-woven mats by melt blowing. Google Patents,
1974, U.S. Patent No. 9,572,721.
Chatterjee, P. K. and B. S. Gupta. Chapter I—Porous structure and liquid flow models.
Textile Science and Technology 13 (2002): 1–55.
Chhabra, R. Nonwoven uniformity-measurements using image analysis. International
Nonwoven Journal 12(1) (2003): 43–50.
Everhart, C. H., D. O. Fischer, F. R. Radwanski, and H. Skoog. High pulp content
nonwoven composite fabric. Google Patents, 1994, U.S. Patent No. 9,572,721.
Hartmann, L. Process of producing non-woven fabric fleece. Google Patents, 1970,
U.S. Patent No. 9,572,721.
Hearle, J. W. S. and M. A. I. Sultan. 19—A study of needled fabrics. Part I: Experimental
methods and properties. Journal of the Textile Institute 58(6) (1967): 251–265.
Hsieh, Y. -L. and B. Yu. Liquid wetting, transport, and retention properties of fibrous
assemblies. Part I: Water wetting properties of woven fabrics and their constitu-
ent single fibers. Textile Research Journal 62(11) (1992): 677–685.
284 Advanced Textile Testing Techniques