Professional Documents
Culture Documents
· Insert enclosed CD in drive · Open the operating manual via
the Start menu and read carefully
· Afterwards download the software.
During the installation on your PC a
“software manual” (pdf) is installed
automatically in the respective sub-
directory
· Unpack OPUS10 · Select SmartGraph 2 via the Start
· Press the push button with a ballpoint menu
pen until the green LED illuminates. · Select Communication from the
The unit is now ready for operation Measuring Instrument menu
(LED flashes every 10 seconds)
· Select interface and confirm · Connect the OPUS 10 to the PC
· Readout memory · The OPUS10 can be configured in
the menu:
Measuring Instrument/Manage
Measuring Instrument. In Logging
mode, select a sampling rate of more
than 1 Minute, as lesser sampling rates
reduce battery life.