Professional Documents
Culture Documents
reviewer4@nptel.iitm.ac.in ▼
How to access 1) The signal xc (t) = sin(2π(100)t) (t in seconds) was sampled with sampling frequency 1 point
the portal of 400 Hz to obtain a discrete time signal x[n] . What is the resulting signal x[n] ?
s in(3πn/4)
Week 0
0 f or all n
Week 1
No, the answer is incorrect.
-Introduction,
Sampling and Score: 0
Reconstruction Accepted Answers:
s in(πn/2)
Quiz :
Assignment 1 2) The continuous-time signal xc (t) = sin(20πt) + cos(40πt) is sampled with a sampling 1 point
Introduction to period T to obtain a discrete time signal x[n] = sin(πn/5) + cos(2πn/5) . Which of the following
Multirate DSP values of T is consistent with this information?
(Part-1)
Introduction to
9/100
Multirate DSP 10/100
(Part-2)
11/100
Sampling and
Nyquist 12/100
criterion
(Part-1) No, the answer is incorrect.
Score: 0
Sampling and
Nyquist Accepted Answers:
criterion 11/100
(Part-2)
3) xc (t) is passed through a C/D converter and the discrete signal obtained is passed 1 point
Signal through an ideal low pass filter with cutoff π /8 radians/s. If xc (t) is bandlimited to 5 kHz, what is the
Reconstruction
maximum value of T that will avoid aliasing in the C/D converter?
(Part-1)
© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
Signal 1/5000
A project of
Reconstruction In association with
(Part-2) 1/20000
Reconstruction 1/15000
filter (Part-1) Funded by
1/10000
Week 2 4) In the above question, if 1/T = 10 kHz, what will the cutoff frequency of the effective 1 point
continuous-time filter be?
Week 3
125 Hz
Week 625 Hz
4-Polyphase
Decomposition 500 Hz
and Properties
of DFT 1000 Hz
Week 9
x[n] = sin(2πn/5)
Week 10
x[n] = sin(πn/5)/(πn/5000)
Week 11
Week 12
x[n] = 5000sin(2πn/5)
q
∫p δ(τ)dτ = 1 for p < 0 < q
q
∫p δ(τ)dτ = 1 for p < q < 0
q
∫p δ(τ)dτ = 1 for pq > 0
q
∫p δ(τ)dτ = −1 for q < 0 < p
Time reversal
Advance operation
Delay operation
8) xc (t) = sin(5t) is input to a C/D converter with T = 1/3 seconds. Let x[n] be the discrete 1 point
time signal at the output. What is the period of x[n] ?
3/5
5/3
x[n] is aperiodic
1/2
10)We often use the Z-transform to understand digital filters. In the Z-plane, with the real axis 1 point
being X and the imaginary axis being Y, some locations of poles are less favorable than the others.
Please choose from the following options, a pole location so that we obtain a well-behaved
implementable high pass filter.
z = 0.1e−jπ
z = 1e−jπ
z = 0.95e−jπ
z = 0.95e−jπ/2
No, the answer is incorrect.
Score: 0
Accepted Answers:
z = 0.95e−jπ
11)What is the periodicity of the discrete time signal x[n] =sin(πn/5) + cos(πn/3)? 1 point
10
15
30
x[n] = δ[n]
x[n] = nu[n]
No, the answer is incorrect.
Score: 0
Accepted Answers:
x[n] = a where a is a constant
x[n] = δ[n]
x[n] = u[n]
x[n] = nu[n]
No, the answer is incorrect.
Score: 0
Accepted Answers:
x[n] = δ[n]
14)Which of the following signals is neither an energy nor a power signal? 1 point
x[n] = δ[n]
x[n] = u[n]
x[n] = nu[n]
No, the answer is incorrect.
Score: 0
Accepted Answers:
x[n] = nu[n]
Xc (jΩ) = 0 for
15)Consider a discrete time system with input x[n] and output y[n], with 1 point
2
|Ω| ≥ 2π(1000) radians/second, the discrete time squarer i.e.y[n] = x [n] . What is the largest
value of T (in seconds) such that yc (t) = x2c (t)?
1/3000
1/2000
1/1000
1/4000
16)Which of the following statements regarding C/D and A/D converters is TRUE? 1 point
17)Three signals, x1 (t) = cos(6πt) , x2 (t)= cos(14πt) ,and x3 (t) = cos(26πt) are 1 point
sampled at 10 Hz. Let the resulting discrete time signals be x1 [n] , x2 [n] and x3 [n] respectively.
Then,
100 Hz
200 Hz
300 Hz
400 Hz
250 Hz
125 Hz
150 Hz
50 Hz
200 Hz
400 Hz
300 Hz
600 Hz