Professional Documents
Culture Documents
Technical data
Series C4i, C15i, C25i
Ordering key for single FRL modules or manifolded FRL units
How to order modules for "self assembling". Step 3: Add flanges with connection thread
Add 1 pair of flanges with connection thread (for inlet and outlet sides).
It is recommended to use the nom. dimension on the thread.
The tube dimension is then depending on the choosen fittings.
How to order modules for "self assembling". Step 4: Add connection keys
Add x number of connection keys for mounting the modules together.
x = number of modules -1.
How to order modules for "self assembling". Step 5: Choose pressure gauge
Detailed information about gauges: see separate section under FRL chapter.
1
Series C4i, C15i, C25i
Ordering key for single FRL modules or manifolded FRL units
Step 1: Choose size C15. Flow capacity 2200 l/min (78 SCFM).
Step 3: Add 1 pair of flanges G 1/2 for size C1 5,5 351 02602 0 from list above.
Step 4: Add 2 connections keys, (3 modules -1 = 2), 5351006072 from list above.
Step 5: Add a pressure gauge dia. 40 mm, 3530200100 from list above
Step 6: Choose a pilot valve 5420800390 + a silencer 5354011130 from list above.
2
Series C4i, C15i, C25i
Isolating valve 1/4 turn 3/2, C4i, C15i and C25i
Technical Data
Type Ball valve
Max. supply pressure 12 bar (174 psi)
Nominal flow
at 6 bar (87 psi), ∆p = 1 bar (15 psi)Qn See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight C4i, C15i, C25i 0,135 kg (0.298 lbs), 0,3 kg (0.661 lbs),
0,564 kg (1.243 lbs)
Diameter of exhaust port
C4i, C15i, C25i 1,4 mm, 1,9 mm, 1,9 mm
Materials: Body Zn-diecasting
Part no.
Symbol Series Version Nominal Flow Standard With padlock Lockable with key,
Qn [l/min] (SCFM) removable in both
positions
C4i Without flange 5352600000 5352600100 5352600200
G1/8 1170 (41) 5352601000 5352601100 5352601200
G1/4 1580 (56) 5352602000 5352602100 5352602200
G3/8 1900 (67) 5352603000 5352603100 5352603200
C15i Without flange 5352620000 5352620100 5352620200
G1/4 1700 (60) 5352622000 5352622100 5352622200
G3/8 4000 (141) 5352623000 5352623100 5352623200
G1/2 4900 (173) 5352624000 5352624100 5352624200
C25i Without flange 5352630000 5352630100 5352630200
G3/8 4280 (151) 5352633000 5352633100 5352633200
G1/2 6300 (222) 5352634000 5352634100 5352634200
G3/4 7350 (259) 5352635000 5352635100 5352635200
G1 7630 (269) 5352636000 5352636100 5352636200
Symbol 1) Lockable, Symbol 2) Non-lockable valves.
1
Series C4i, C15i, C25i
Isolating valve 1/4 turn 3/2, C4i, C15i and C25i
Scheme for versions C4i and C25i. Scheme for versions C15i.
Series A B C D E G H I J K M N P Q
C4i 47 37 81,5 20,5 41 33,5 25,5 23,5 46 60 4,2 27 42,5 31,5
C15i 63 60 101 31,5 63 36,5 31,5 31,5 82 88 5,1 39,1 64 44,5
C25i 80 68 117 36 72 27 43 40 84 102 6,3 40 73 50,5
2
Series C4i, C15i, C25i
Filter C4i and C4i Basic, G 1/8–G 3/8
Technical Data
Type Vortex system, with sintered filter and
semi-automatic or automatic drain
(optional)
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi), ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,3 kg (0.66 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Polycarbonate - without bowl guard
(basic)
Filter porosity 25 µm or 5 µm (optional)
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl/ min.] (SCFM)
G 1/8 800 (28) – 5351201000
G 1/4 1125 (40) – 5351202000
G 1/4 1125 (40) Metal bowl and manual drain 8901703570
G 3/8 1200 (42) – 5351203000
Without flange – – 5351200000
Without flange – Automatic drain 5351200020
Without flange – Filter 5 µm 5351200010
Without flange – Without bowl guard 5352200000
1
Series C4i, C15i, C25i
Filter C4i and C4i Basic, G 1/8–G 3/8
2
Series C4i, C15i, C25i
Filter C15i, G 1/4–G 1/2
Technical Data
Type Vortex system, with sintered filter and
semi-automatic or automatic drain
(optional)
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi), ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,5 kg (1.10 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Filter porosity 25 µm or 5 µm (optional)
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM)
G 1/4 2400 (85) – 5351222000
G 3/8 3480 (123) – 5351223000
G 3/8 3480 (123) Metal bowl and manual drain 8901703580
G 3/8 3480 (123) Metal bowl and manual drain 8901703580
G 1/2 3600 (127) – 5351224000
Without flange – – 5351220000
Without flange – Automatic drain 5351220020
Without flange – Filter 5 µm 5351220010
1
Series C4i, C15i, C25i
Filter C25i, G 3/8–G 1
Technical Data
Type Vortex system, with sintered filter and
semi-automatic or automatic drain
(optional)
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi) and ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F)
Medium Compressed air
Weight 1,1 kg (2.43 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Filter porosity 25 µm or 5 µm (optional)
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM)
G 3/8 3400 (120) – 5351233000
G 1/2 5000 (177) – 5351234000
Metal bowl with sight glass
G 1/2 5000 (177) 8901700610
and manual drain
G 3/4 5500 (194) – 5351235000
Metal bowl with sight glass
G 3/4 5500 (194) 8901700620
and manual drain
G1 5700 (201) – 5351236000
Without flange – – 5351230000
Without flange – Automatic drain 5351230020
Without flange – Filter 5 µm 5351230010
1
Series C4i, C15i, C25i
Filter C25i, G 3/8–G 1
2
Series C4i, C15i, C25i
Pre- & Coalescing filter C4i, G 1/8–G 3/8
Technical Data
Type Vortex system and sintered filter with
borosilicate micro-fibrous filter and semi-
automatic drain
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi) and ∆p = 0.140 bar (2 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,5 kg (1.10 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Filter porosity Pre-filter 5 µm
Filter 0,01 µm
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With option Part no.
ISO 228/1 Qn [Nl / min.] (SCFM)
G 1/8 150 (5.3) – 5351901810
G 1/4 190 (6.7) – 5351902810
G 3/8 190 (6.7) – 5351903810
Without flange – – 5351900810
Without flange – Automatic drain 5351900830
1
Series C4i, C15i, C25i
Pre- & Coalescing filter C15i, G 1/4–G 1/2
Technical Data
Type Vortex system and sintered filter with
borosilicate micro-fibrous filter and semi-
automatic drain
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi) and ∆p = 0.140 bar (2 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 1,2 kg (2.65 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Filter porosity Pre-filter 5 µm
Filter 0,01 µm
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With option Part no.
ISO 228/1 Qn [Nl / min.] (SCFM)
G 1/4 410 (15) – 5351922810
G 3/8 445 (16) – 5351923810
G 1/2 450 (16) – 5351924810
Without flange – – 5351920810
Without flange – Automatic drain 5351920830
1
Series C4i, C15i, C25i
Pre- & Coalescing filter C25i, G 3/8–G 1
Technical Data
Type Vortex system and sintered filter regulator with
borosilicate micro-fibrous filter and semi-
automatic drain
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi) and ∆p = 0.140 bar (2 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 2 kg (4.41 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Filter porosity Pre-filter 5 µm
Filter 0,01 µm
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With option Part no.
ISO 228/1 Qn [Nl / min.] (SCFM)
G 3/8 430 (15) – 5351933810
G 1/2 530 (19) – 5351934810
G 3/4 530 (19) – 5351935810
G1 530 (19) – 5351936810
Without flange – – 5351930810
Without flange – Automatic drain 5351930830
1
Series C4i, C15i, C25i
Filter regulator & Coalescing filter C4i, G 1/8–G 3/8
Technical Data
Type Diaphragm filter regulator, self-relieving
with sintered pre-filter - coalescing filter unit
with micro-fibrous borosilicate and
semi-automatic drain.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn See table
at primary pressure = 7 bar (102 psi)
secondary pressure = 6 bar (87 psi) and
∆p = 0.140 bar (2 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,6 kg (1.32 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Filter porosity Prefilter 5 µm
Filter 0,01 µm
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With option Part no.
ISO 228/1 Qn [NI / min.] (SCFM)
G 1/8 150 (5.30) – 5351901210
G 1/4 190 (6.71) – 5351902210
G 3/8 190 (6.71) – 5351903210
Without flange – – 5351900210
Without flange – Automatic drain 5351900230
1
Series C4i, C15i, C25i
Filter regulator & Coalescing filter C15i, G 1/4–G 1/2
Technical Data
Type Diaphragm filter regulator, self-relieving
with sintered pre-filter - coalescing filter unit
with micro-fibrous borosilicate and
semi-automatic drain.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn See table
at primary pressure = 7 bar (102 psi)
secondary pressure = 6 bar (87 psi) and
∆p = 0.140 bar (2 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 1,6 kg (3.53 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Filter porosity Prefilter 5 µm
Filter 0,01 µm
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With option Part no.
ISO 228/1 Qn [Nl / min.] (SCFM)
G 1/4 410 (14.4) – 5351922210
G 3/8 445 (15.7) – 5351923210
G 1/2 450 (15.9) – 5351924210
Without flange – – 5351920210
Without flange – Automatic drain 5351920230
1
Series C4i, C15i, C25i
Filter regulator & Coalescing filter C25i, G 3/8–G 1
Technical Data
Type Diaphragm filter regulator, self-relieving
with sintered pre-filter - coalescing filter unit
with micro-fibrous borosilicate and
semi-automatic drain.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn See table
at primary pressure = 7 bar (102 psi)
secondary pressure = 6 bar (87 psi) and
∆p = 0.140 bar (2 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 2,76 kg (6.19 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Filter porosity Prefilter 5 µm
Filter 0,01 µm
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Part no.
Symbol Threaded ports Nominal flow With option Part no.
ISO 228 / 1 Qn [NI / min.] (SCFM)
G 3/8 430 (15) 5351933210
G 1/2 530 (19) 5351934210
G 3/4 530 (19) 5351935210
G1 530 (19) 5351936210
Without flange 5351930210
Without flange Automatic drain 5351930230
1
Series C4i, C15i, C25i
Pressure Regulator C4i, G 1/8–G 3/8
Technical Data
Type Diaphragm regulating valve,
Max. supply pressure 12 bar (174 psi)
Secondary pressure range 0,5–10 bar (7–145 psi) or
0,1–3 bar (1–44 psi) (optional)
Nominal flow Qn
at primary pressure = 7 bar (102 psi)
secondary pressure = 6 bar (87 psi) and See table
∆p = 1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,3 kg (0.66 lbs)
Materials Body Zn-diecasting
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM)
G 1/8 850 (30) – 5351401200
G 1/4 1400 (49) – 5351402200
G 3/8 1400 (49) – 5351403200
Without flange – – 5351400200
Without flange – 0,1–3 bar (1–44 psi) 5351400300
With lockable control knob,
Without flange – 5351400210
without lock (1)
1
Series C4i, C15i, C25i
Manifold Regulator, C4i, G 1/4, G 3/8
Technical Data
Type Diaphragm regulator,
Max. supply pressure 12 bar (174 psi)
Secondary pressure range 0,5–10 bar (7–145 psi) or
0,1–3 bar (1–44 psi) (optional)
Nominal flow Qn
at primary pressure 7 bar (102 psi),
secondary pressure = 6 bar (87 psi) and See table
∆p = 1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,3 kg (0.66 lbs)
Materials Body Zn-diecasting
Pressure port G 1/8
Outlet port G 1/4
Technical information
These regulators permit a wide range of outlet pressures from a common supply (two ports).
Supplied without flanges or pressure gauge.
Part no.
Symbol Threaded inlet port Nominal flow With options [bar] (psi) Part no.
Qn [Nl / min.] (SCFM)
Without flange or pressure gauge – 5352400200
Without flange or pressure gauge 0,1-3 (1-44) 5352400300
G 1/4 without pressure gauge 1 400 (49) – 5352402200
G 1/4 without pressure gauge 0,1-3 (1-44) 5352402300
G 3/8 without pressure gauge 1 400 (49) – 5352403200
G 3/8 without pressure gauge 0,1-3 (1-44) 5352403300
1
Series C4i, C15i, C25i
Pressure Regulator C15i, G 1/4–G 1/2
Technical Data
Type Diaphragm regulator,
Max. supply pressure 12 bar (174 psi)
Secondary pressure range 0,5–10 bar (7–145 psi) or
0,1–3 bar (1–44 psi) (optional)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p = 1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,64 kg (1.41 lbs)
Materials Body Zn-diecasting
Part no.
Symbol Threaded port Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM) without pressure gauge
G 1/4 2500 (88) – 5351422200
G 3/8 2800 (99) – 5351423200
G 1/2 3500 (124) – 5351424200
Without flange – – 5351420200
Without flange – 0,1–3 bar (1–44 psi) 5351420300
With lockable control knob,
Without flange – 5351420210
without lock (1)
With lockable control knob,
Without flange – 8901701340
built-in lock (2) (E11 H1)
1
Series C4i, C15i, C25i
Pressure Regulator C25i, G 3/8–G 1
Technical Data
Type Diaphragm regulator,
Max. supply pressure 12 bar (174 psi)
Secondary pressure range 0,5–10 bar (7–145 psi) or
0,1–3 bar (1–44 psi) (optional)
Nominal flow Qn
at primary pressure =7 bar (102 psi)
secondary pressure = 6 bar (87 psi) and See table
∆p = 1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 1,5 kg (3.31 lbs)
Materials Body Zn-diecasting
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [NI / min.] (SCFM) without pressure gauge
G 3/8 3600 (127) – 5351433200
G 1/2 5250 (185) – 5351434200
G 3/4 5300 (187) – 5351435200
G1 5300 (187) – 5351436200
Without flange – – 5351430200
Without flange – 0,1–3 bar (1–44 psi) 5351430300
With lockable control knob,
Without flange – 5351430210
without lock (1)
With lockable control knob,
Without flange – 8901701350
built-in lock (2) (E11 H1)
1
Series C4i, C15i, C25i
Manifold Regulator C25i, G 3/8–G 1
Technical Data
Type Rolling diaphragm regulator,
[mm]
Max. supply pressure 12 bar (174 psi)
Secondary pressure range 0,5 to 10 bar(7 to 145 psi) or
0,1–3 bar (1–44 psi) (optional)
Nominal flow Qn
at primary pressure 7 bar (102 psi),
secondary pressure = 6 bar (87 psi) and (see table)
∆p = 1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,3 kg (0.66 lbs)
Materials Body Zn-diecasting
Pressure port G 1/8
Outlet port G 1/2
Technical information
These regulators permit a wide range of outlet pressures from a common supply (two ports).
Supplied without flanges or pressure gauge.
Part no.
Symbol Threaded inlet port Nominal flow With options [bar] (psi) Part no.
Qn [Nl / min.] (SCFM)
Without flange or pressure gauge – 0,5–10 (7–145) 5352430200
Without flange or pressure gauge – 0,1–3 (1–44) 5352430300
G 1/2 without pressure gauge 5300 (187) 0,5–10 (7–145) 5352434200
G 1/2 without pressure gauge – 0,1–3 (1–44) 5352434300
G 3/4 without pressure gauge 5300 (187) 0,5–10 (7–145) 5352435200
G 3/4 without pressure gauge – 0,1–3 (1–44) 5352435300
* Connection for pressure gauge: G 1/8.
** Connection for outlet pressure: G 1/2 ISO 228/1.
*** 2 connections for inlet pressure according to ISO 228/1 (corresponding to usable flange sizes.)
A = 29 mm + 68 mm x n.
B = 16 mm + 68 mm x n.
n = number of regulators.
Accessories
Gauges
Flanges (only for units without flange): see Accessories
Connecting flanges: see Accessories
Spare parts kit 5351430002
1
Series C4i, C15i, C25i
Filter regulator C4i and C4i Basic, G 1/8–G 3/8
Technical Data
Type Diaphragm regulator, self-relieving
with sintered filter and semi-automatic
or automatic drain
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure = 7 bar (102 psi),
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,37 kg (0.82 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Polycarbonate - without bowl guard (basic)
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [NI / min.] (SCFM) without pressure gauge
G 1/8 700 (25) – 5351301200
G 1/4 990 (34.95) – 5351302200
G 1/4 – Metal bowl and manual drain 8901701460
G 3/8 1000 (35) – 5351303200
Without flange – – 5351300200
Without flange – Automatic drain 5351300220
With lockable control knob,
Without flange – 5351300900
without lock (1)
Without flange – Filter 5 µm 5351300210
Without flange – Without bowl guard 5352300200
1
Series C4i, C15i, C25i
Filter regulator C4i and C4i Basic, G 1/8–G 3/8
2
Series C4i, C15i, C25i
Filter regulator C15i, G 1/4–G 1/2
Technical Data
Type Diaphragm regulator, self-relieving
with sintered filter and semi-automatic
or automatic drain
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi)
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Max. temperature +50 °C (+122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,9 kg (1.98 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [NI / min.] (SCFM) without pressure gauge
G 1/4 2100 (74) – 5351322200
G 3/8 2800 (99) – 5351323200
G 3/8 – Metal bowl and manual drain 8901702480
G 1/2 3300 (116) – 5351324200
Without flange – – 5351320200
Without flange – Automatic drain 5351320220
Without flange – Filter 5 µm 5351320210
With lockable control knob,
Without flange – 5351320900
without lock (1)
With lockable control knob,
Without flange – 8901701360
built-in lock (2) (E11 H1)
1
Series C4i, C15i, C25i
Filter regulator C15i, G 1/4–G 1/2
2
Series C4i, C15i, C25i
Filter regulator C25i, G 3/8–G 1
Technical Data
Type Diaphragm regulator, self-relieving
with sintered filter and semi-automatic
or automatic drain
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 1,8 kg (3.20 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM) without pressure gauge
G 3/8 3300 (116) – 5351333200
G 1/2 4000 (141) – 5351334200
Metal bowl with sight glass
G 1/2 – 8901700720
and manual drain
G 3/4 4440 (157) – 5351335200
Metal bowl with sight glass
G 3/4 – 8901700680
and manual drain
G1 4700 (166) – 5351336200
Without flange – – 5351330200
Without flange – Automatic drain 5351330220
Without flange – Filter 5 µm 5351330210
With lockable control knob,
Without flange – 5351330900
without lock (1)
With lockable control knob,
Without flange – 8901701370
built-in lock (2) (E11 H1)
1
Series C4i, C15i, C25i
Filter regulator C25i, G 3/8–G 1
2
Series C4i, C15i, C25i
Lubricator C4i and C4i Basic, G 1/8–G 3/8
Technical Data
Type Proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi) and ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Oil viscosity at 40 °C (104 °F) 9–11 mm²/s
Weight 0,3 kg (0.66 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Polycarbonate* - without bowl guard (basic)
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
This device is equipped with a system that permits the filling of the lubricator by means of a fitting
located at the lower part of the bowl which can be connected to a tank.
By pressing the filling button the operator opens a venturi which creates a vacuum in the upper
part of the bowl, this enabling the oil in the tank to be sucked up.
* Note! Polycarbonate does not withstand oils with aggressive compounds, e.g alcohols. We
recommend oil of the ATF-DEXRON type (part no. 8982000010)or oil with an aniline point of 93
°C ±5 °C.(199 °F ±41 °F)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM)
G 1/8 1000 (35) – 5351501000
G 1/4 1600 (56) – 5351502000
G 3/8 1700 (60) – 5351503000
Without flange – – 5351500000
Without flange – Basic 5352500000
1
Series C4i, C15i, C25i
Lubricator C4i and C4i Basic, G 1/8–G 3/8
2
Series C4i, C15i, C25i
Lubricator C15i, G 1/4–G 1/2
Technical Data
Type Proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi) and ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Oil viscosity at 40 °C (104 °F) 9–11 mm²/s
Weight 0,5 kg (1.10 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
This device is equipped with a system that permits the filling of the lubricator by means of a fitting
located at the lower part of the bowl which can be connected to a tank.
By pressing the filling button the operator opens a venturi which creates a vacuum in the upper
part of the bowl, this enabling the oil in the tank to be sucked up.
Part no.
Symbol Threaded ports ISO 228/1 Nominal flow Qn [NI / min.] (SCFM) Part no.
G 1/4 2500 (88) 5351522000
G 3/8 3600 (217) 5351523000
G 1/2 4100 (145) 5351524000
1
Series C4i, C15i, C25i
Lubricator C25i, G 3/8–G 1
Technical Data
Type Proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi) and ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Oil viscosity at 40 °C (104 °F) 9–11 mm²/s
Weight 1,1 kg (2.43 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
This device is equipped with a system that permits the filling of the lubricator by means of a fitting
located at the lower part of the bowl which can be connected to a tank.
By pressing the filling button the operator opens a venturi which creates a vacuum in the upper
part of the bowl, this enabling the oil in the tank to be sucked up.
Part no.
Symbol Threaded ports Nominal flow Qn [Nl / min.] (SCFM) Part no.
ISO 228/1
G 3/8 4500 (159) 5351533000
G 1/2 6700 (237) 5351534000
G 3/4 6800 (240) 5351535000
G1 6800 (240) 5351536000
Without flange – 5351530000
1
Series C4i, C15i, C25i
Combination FR+L unit C4i and C4i Basic, G 1/8–G 3/8
Technical Data
Type Diaphragm regulator, self-relieving
with filter with semi-automatic drain
(manual and automatic drain as option)
and proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,57 kg (1.26 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Polycarbonate - without bowl guard
Bowl capacity Filter 4 cl (1.35 U.S.Fl.oz)
Lubricator 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM) with pressure gauge
G 1/8 620 (22) - 5351001000
G 1/4 900 (32) - 5351002000
G 3/8 910 (32.12) - 5351003000
Without flange - automatic drain 5351000020
without flange without bowl guard 5352000000
1
Series C4i, C15i, C25i
Combination FR+L unit C4i and C4i Basic, G 1/8–G 3/8
2
Series C4i, C15i, C25i
Combination FR+L unit C15i, G 1/4–G 1/2
Technical Data
Type Diaphragm regulator, self-relieving
with filter with semi-automatic drain
(manual and automatic drain as option)
and proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 1,43 kg (3.15 psi)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity Filter 15 cl (5.1 U.S.Fl.oz)
Lubricator 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM) with pressure gauge
G 1/4 1200 (42) – 5351022000
G 3/8 2100 (74) – 5351023000
G 1/2 2500 (88) – 5351024000
Without flange – Automatic drain 5351020020
1
Series C4i, C15i, C25i
Combination FR+L unit C25i, G 3/8–G 1
Technical Data
Type Diaphragm regulator, self-relieving
with semi-automatic drain
(manual and automatic drain as option)
filter and proportional mist lubricator.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at supply pressure = 7 bar (102 psi);
delivery pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 3,0 kg (6.61 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity Filter 25 cl (8.5 U.S.Fl.oz)
Lubricator 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow With options Part no.
ISO 228/1 Qn [Nl / min.] (SCFM) with pressure gauge
G 3/8 2900 (102) – 5351033000
G 1/2 3700 (131) – 5351034000
G 3/4 3800 (134) – 5351035000
G1 3800 (134) – 5351036000
Without flange – Automatic drain 5351030020
1
Series C4i, C15i, C25i
Combination F+R+L unit C4i and C4i Basic, G 1/8–G 3/8
Technical Data
Type Diaphragm regulator,
with semi-automatic drain
(manual and automatic drain as option)
filter and proportional mist lubricator.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure = 7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 0,73 kg (1.61 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Polycarbonate - without bowl guard (Basic)
Bowl capacity Filter 4 cl (1.35 U.S.Fl.oz)
Lubricator 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow Part no.
ISO 228/1 Qn [Nl / min.] (SCFM) With pressure gauge
G 1/8 590 (21) 5351101000
G 1/4 860 (30) 5351102000
G 3/8 890 (31) 5351523000
Basic without flange – 5352100000
1
Series C4i, C15i, C25i
Combination F+R+L unit C15i, G 1/4–G 1/2
Technical Data
Type Diaphragm regulator, filter with
semi-automatic drain
(manual and automatic drain as option)
and proportional mist lubricator.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure = 7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 1,7 kg (3.75 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity Filter 15 cl (5.1 U.S.Fl.oz)
Lubricator 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow Part no.
ISO 228/1 Qn [Nl / min.] (SCFM) With pressure gauge
G 1/4 1800 (64) 5351122000
G 3/8 1900 (67) 5351123000
1
Series C4i, C15i, C25i
Combination F+R+L unit C25i, G 3/8–G 1
Technical Data
Type Diaphragm regulator, filter
with semi-automatic drain
(manual and automatic drain as option)
and proportional mist lubricator.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F)
Medium Compressed air
Weight 3,85 kg (8.59 lbs)
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity Filter 25 cl (8.5 U.S.Fl.oz)
Lubricator 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm (optional)
Part no.
Symbol Threaded ports Nominal flow Part no.
ISO 228/1 Qn [Nl / min.] (SCFM) With pressure gauge
G 3/8 2600 (92) 5351133000
G 1/2 3300 (116) 5351134000
G 3/4 3400 (120) 5351135000
G1 3500 (124) 5351136000
1
Series C4i, C15i, C25i
Emergency stop valve C4i, C15i, C25i
Technical Data
Type Poppet valve
Supply pressure 4 to 10 bar (58 to 145 psi)
Nominal flow Qn
at 6 bar (87 psi), ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air, lubricated or non-lubricated
Weight See table
Materials Body Zn-diecasting
Seals Nitrile rubber
Actuation can be :
1. Pneumatic by means of pilot port Part no. 5351602302
2. Solenoid (CNOMO connection) by means of pilot valve
Application
Integration of a pneumatic or solenoid 3/2 emergency stop valve into the compressed air
preparation unit.
This valve is used as a shut-off and rapid exhaust valve and for start-up of compressed air by
remote signal.
Part no.
Symbol Series Weight [kg] (lbs) Nominal flow Part no.
Qn [l/min] (SCFM) without flange or pilot
C4i 0,3 (0.66) 1000 (35) 5351600500
C15i 0,6 (1.32) 3200 (113) 5351620500
* Mounting surface.
Series A B C D E F G H I J L M N P R
C4i 73 37 20,5 41 47 23,5 8,5 40 46 60 4,2 27 42,5 G 1/4 10
C15i 99 60 31,5 63 63 31,5 3 64,5 82 88 5,1 39,1 64 G 1/2 18
C25i 107,5 68 36 72 80 40 1,5 60 84 102 6,3 40 73 G 1/2 21
1
Series C4i, C15i, C25i
Adjustable progressive start-up valve, C4i, C15i, C25i
Technical Data
Type Poppet valve, spring-loaded, adjustable,
with integral throttle
Supply pressure 4 to 10 bar (58 to 145 psi)
Nominal flow Qn
at 6 bar (87 psi), ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air, lubricated or non-lubricated
Weight See table
Materials Body Zn-diecasting
Technical information
Function:
1. Secondary pressure builds up gradually in the system. The moving parts in the system
advance slowly to their initial position.
2. On reaching the threshold pressure, the start-up valve diverts the full primary pressure into the
system.
Application
System for progressive increase of pressure:
- Adjustable pressure build-up via removable integral throttle (throttle 0,8 mm dia.; 5 additional
larger throttles supplied).
- Full pressure threshold from 4 to 7 bar (58 to 102 psi) (at pv = 10 bar (145 psi)).
- Adjusting knob lead-sealed.
Part no.
Symbol Series Weight [kg] (lbs) Nominal flow Part no.
Qn [l/min] (SCFM) without flange
C4i 0,2 (0.44) 1150 (41) 5351600100
C15i 0,6 (1.32) 3800 (134) 5351620100
Series A B C D E F G H I K L M N
C4i 91,5 37 41 41 47 23,5 68 46 60 4,2 27 42,5 0
C15i 156 60 31,5 63 63 40 134 81 88 5,1 39,1 73 3
C25i 174 68 72 72 80 31,5 121 84 102 6,3 40 64 0
1
Series C4i, C15i, C25i
Adjustable progressive start-up valve, C4i, C15i, C25i
2
Series C4i, C15i, C25i
Piloted progressive start-up Valve and Unit Series C25i
Technical Data
Type Poppet valve with throttle preceded by 3/2 NC
Poppet valve in unit
Supply pressure Valve: 0,5–10 bar (7–145 psi) (extern. pilot),
3–10 bar (44–145 psi) (intern. pilot)
Unit: 4–10 bar (58–145 psi)
Nominal flow
at 6 bar (87 psi), ∆p = 1 bar (15 psi)Qn See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight See table
Materials Zn-diecasting, Al
NBR (Nitrile Butadiene Rubber)
Technical information
Function:
- Valve: Secondary pressure builds up gradually due to a nozzle (one of 0,8 mm dia. is built-in
and a further 5 nozzles with greater diameters are supplied).
Max. flow is only attained when the piloting system is activated by a control component and all
conditions defined by the user are satisfied (Programmable controller for example).
- Unit: Associates the function of the emergency stop valve and of the piloted progressive start-
up valve (see above).
Pilot control can be either solenoid (with CNOMO interface) or pneumatic pilot port.
Control pressure is 3 to 10 bar (44 to 145 psi).
This valve is supplied without flanges.
Application
System for progressive increase of pressure and slow motion during start-up:
- Adjustable pressure build-up via removable integral nozzle (nozzle 0,8mm dia.; 5 additional
larger nozzles supplied).
Unit for same application including an emergency stop valve allowing fast shut-off of the system.
Part no.
Symbol Description Weight [kg] (lbs) Nominal flow Part no.¹)
Qn [l/min] (SCFM)
1
Series C4i, C15i, C25i
Piloted progressive start-up Valve and Unit Series C25i
Valve Unit
* 2 threads M4.
** CNOMO/AFNOR E49-066 mounting surface.
2
Series C4i, C15i, C25i
Progressive start-up units C4i, C15i, C25i
pneumatic or solenoid actuation
Technical Data
Type 3/2-way piloted valve, with progressive
start-up valve
Supply pressure 4 to 10 bar (58 to 145 psi)
Nominal flow Qn
at 6 bar (87 psi), ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air, lubricated or non-lubricated
Weight See table
Materials Body Zn-diecasting
Technical information
Function:
1.) 3/2 valve is actuated (solenoid or pneumatic)
2.) Secondary pressure builds up gradually in the system.
The moving parts in the system advance slowly to their initial position.
3.) On reaching the pressure threshold, the start-up valve diverts the full primary pressure into
the system.
Application
System for progressive increase of pressure:
- Adjustable pressure build-up via removable integral throtte (throttle 0,8 mm dia.; 5 additional
larger throttles supplied).
- Full pressure threshold from 4 to 7 bar (58 to 102 psi) (at pv = 10 bar (145 psi)).
- Adjusting knob can be lead-sealed.
Part no.
Symbol Series Weight [kg] (lbs) Nominal flow Part no.
Qn [l/min] (SCFM) without pilot, flange or
pressure gauge
C4i 0,5 (1.10) 900 (32) 5351600150
C15i 1,4 (3.09) 3000 (106) 5351620150
* Removable throttle.
1
Series C4i, C15i, C25i
Progressive start-up units C4i, C15i, C25i
pneumatic or solenoid actuation
Series A B C D E F G H I J K
C4i 100 37 37 20,5 41 47 23,5 73 91,5 83 97
C15i 155,5 60 60 31,5 63 63 31,5 99 152,5 142 148
C25i 175 68 68 36 72 80 40 107,5 173,5 152 170
Series M N P Q R (L) G1/8 (L) G 1/4 (L) G 3/8 (L) G 1/2 (L) G 3/4 (L) G1
C4i 4,2 27 42,5 G 1/4 10 94 99 99 – – –
C15i 5,1 39,1 64 G 1/2 18 – 141 152 152 – –
C25i 6,3 40 75 G 1/2 21 – – 165 172 172 193
2
Series C4i, C15i, C25i
Sequencing and balancing valve, C4i and C25i
Technical Data
Type Poppet valve, spring-loaded, switchable
Supply pressure range 1 to 12 bar (15 to 174 psi),
Threshold pressure (adjustable)
1....8 bar (15 .. 116 psi)
Nominal flow Qn
at 6 bar (87 psi), ∆p = 1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air, lubricated or non-lubricated
Weight See table
Materials Body Zn-diecasting
N.B.: After setting the required pressure level the adjusting knob can be wire-locked and lead-
sealed.
Technical information
Sequencing valve (supply at port 1).
- Supply pressure at port 1 builds up.
- Check valve blocks air passage to port 2.
- When the pressure at port 1 exceeds the threshold pressure, determined by the spring setting, the valve switches and air flows to port 2.
Balancing valve (supply at port 2).
- Supply pressure at port 2 builds up.
- Air flows via the check valve to port 1.
- Delivery pressure builds up.
- When the pressure at port 1 exceeds the threshold pressure determined by the spring setting, the valve switches. The air flows via the two
circuits to port 1.
- If the supply pressure at port 2 drops and if the delivery pressure drops to a level below the threshold pressure, the valve switches and the
preset pressure in the system is maintained.
Part no.
Symbol Series Weight [kg] (lbs) Nominal flow Part no.
Qn [l/min] (SCFM) without flange
C4i 0,2 (0.44) 1300 (46) 5351600300
Series A B C D E F G H I K L M J J J J J J
(G1/8) (G 1/4) (G 3/8) (G 1/2) (G 3/4) (G 1)
C4i 91,5 37 20,5 41 47 23,5 68 46 60 4,2 27 42,5 57 62 62 – – -
C25i 173,5 68 36 72 80 40 133,5 84 102 6,3 40 73 – – 97 104 104 125
1
Series C4i, C15i, C25i
Oil remover and silencer C25i, G 1/2 (Purquiet)
Technical Data
Type Oil filter with silencer
Multi-air connection 2 x threaded ports G 1/2
5 x connnections for tubes with
ext. dia. 10 mm in diaphragm cover
Max. supply pressure 12 bar (174 psi)
Nominal flow Qn
at 6 bar (87 psi) and ∆p=1 bar (15 psi) 1500 l/min (53 SCFM)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Weight 1,4 kg (3.19 lbs)
Materials Body Zn-diecasting
Useful capacity 25 cl (8.5 U.S.Fl.oz)
Technical information
Bores for tube connection by piercing the upper diaphragm.
Function :
- With this oil remover and silencer all the exhaust air in the system can be collected and
replaced with clean, non-lubricated air (oil filtering up to 99%), which is then released into the
atmosphere.
- Simultaneous silencing of up to 30 dB (A) is also achieved.
- The differential pressure gauge supplied shows the pressure head (level of pressure head
corresponds to degree of clogging in the cartridge).
Part no.
Symbol With differential pressure gauge and threaded ports G 1/2 ISO 228/1
5351634900
1
Series C4i, C15i, C25i
Metal bowl with sight glass series C25i
Technical Data
Visibility 65% of height of bowl
Max. primary pressure 12 bar (174 psi)
Materials Bowl Aluminum
Sight glass Borosilicate glass
Volume 25 cl (8.5 U.S.Fl.oz)
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator is
aimed at helping designers meet machinery safety standards in accordance with European
Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator is
aimed at helping designers meet machinery safety standards in accordance with European
Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator is
aimed at helping designers meet machinery safety standards in accordance with European
Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
and poppet valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Seals Nitrile rubber
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator and
emergency stop valve is aimed at helping designers meet machinery safety standards in
accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
and poppet valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator and
emergency stop valve is aimed at helping designers meet machinery safety standards in
accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
and poppet valve
Wire color pink-brown brown-red
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Valve
position 1 1
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Pin c1 b1
Filter porosity 25 µm or 5 µm
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C4i G1/8, G1/4, G 3/8 - Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
poppet valve and spring loaded
adjustable valve.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Seals Nitrile rubber
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
emergency stop valve and start up valve is aimed at helping designers meet machinery safety
standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C4i G1/8, G1/4, G 3/8 - Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C15i G 1/4, G 3/8, G 1/2 - Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
poppet valve and spring loaded
adjustable valve.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
emergency stop valve and start up valve is aimed at helping designers meet machinery safety
standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C15i G 1/4, G 3/8, G 1/2 - Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1 - Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
poppet valve and spring loaded
adjustable valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
emergency stop valve and start up valve is aimed at helping designers meet machinery safety
standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1 - Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
and proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator and
lubricator is aimed at helping designers meet machinery safety standards in accordance with
European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
and proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator and
a lubricator is aimed at helping designers meet machinery safety standards in accordance with
European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional)
and proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator and
a lubricator is aimed at helping designers meet machinery safety standards in accordance with
European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
proportional mist lubricator and poppet valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Seals Nitrile rubber
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
lubricator and emergency stop valve is aimed at helping designers meet machinery safety
standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
proportional mist lubricator and poppet valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
lubricator and emergency stop valve is aimed at helping designers meet machinery safety
standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
proprtional mist lubricator and poppet valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
lubricator and emergency valve is aimed at helping designers meet machinery safety standards
in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C4i G 1/8, G 1/4, G 3/8 - Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
proportional mist lubricator, poppet valve
and spring loaded adjustable valve.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
Valve
position 1 1
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Seals Nitrile rubber
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Valve
position 7 7
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
lubricator, emergency stop valve and progessive start up valve is aimed at helping designers
meet machinery safety standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C4i G 1/8, G 1/4, G 3/8 - Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C15i G 1/4, G 3/8, G 1/2 - Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
proportional mist lubricator, poppet valve
and spring loaded adjustable valve.
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
lubricator, emergency stop valve and start up valve is aimed at helping designers meet
machinery safety standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C15i G 1/4, G 3/8, G 1/2 - Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+FR+L+Emergency Stop Valve
+ Adjustable Progressive Start up Valve Unit
Series C25i G3/8, G1/2, G 3/4, G 1 - Security series
Technical Data
Type Ball valve, diaphragm filter-regulator,
self-relieving with sintered filter and
semi-automatic or automatic drain (optional),
proportional mist lubricator, poppet valve
and spring loaded adjustable valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter-regulator,
lubricator, emergency stop valve and start up valve is aimed at helping designers meet
machinery safety standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
Technical Data
Type Ball valve, filter with semi-automatic drain
(manual or automatic drain as option),
diaphragm regulator
and proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Oil viscosity 9–11 mm²/s
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter, regulator and
lubricator is aimed at helping designers meet machinery safety standards in accordance with
European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
Technical Data
Type Ball valve, filter with semi-automatic drain
(manual or automatic drain as option),
diaphragm regulator
and proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Oil viscosity 9–11 mm²/s
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter, regulator and
lubricator is aimed at helping designers meet machinery safety standards in accordance with
European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
Technical Data
Type Ball valve, filter with semi-automatic drain
(manual or automatic drain as option)
diaphragm regulator
and proportional mist lubricator
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Connecting nipple G 1/8, G 1/4 (adapter for pressure gauges Ø 40, G 1/8), 1823391388
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Oil viscosity 9–11 mm²/s
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter, regulator and
lubricator is aimed at helping designers meet machinery safety standards in accordance with
European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L+Emergency Stop Valve Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
Technical Data
Type Ball valve, filter with semi-automatic drain
(manual or automatic drain as option)
diaphragm regulator, proportional
mist lubricator and poppet valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Oil viscosity 9–11mm²/s
Materials Body Zn-diecasting
Bowl Polyamide - with composite bowl guard
Seals Nitrile rubber
Bowl capacity 4 cl (1.35 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter, regulator,
lubricator and emergency stop valve is aimed at helping designers meet machinery safety
standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L+Emergency Stop Valve Unit
Series C4i G 1/8, G 1/4, G 3/8
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L+Emergency Stop Valve Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
Technical Data
Type Ball valve, filter with semi-automatic drain
(manual or automatic drain as option)
diaphragm regulator, proportional
mist lubricator and poppet valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and See table
∆p=1 bar (15 psi)
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Oil viscosity 9–11mm²/s
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 15 cl (5.1 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter, regulator,
lubricator and emergency stop valve is aimed at helping designers meet machinery safety
standards in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L+Emergency Stop Valve Unit
Series C15i G 1/4, G 3/8, G 1/2
Security series
2
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L+Emergency Stop Valve Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
Technical Data
Type Ball valve, filter with semi-automatic drain
(manual or automatic drain as option)
diaphragm regulator, proportional
mist lubricator and poppet valve
Max. supply pressure 12 bar (174 psi)
Secondary pressure 0,5–10 bar (7–145 psi)
Nominal flow Qn
at primary pressure =7 bar (102 psi);
secondary pressure = 6 bar (87 psi) and
∆p=1 bar (15 psi) See table
Ambient temperature range +5 °C to +50 °C (+41 °F to +122 °F)
0 °C to +50 °C (+32 °F to +122 °F) with dry air
Medium Compressed air
Oil viscosity 9–11mm²/s
Materials Body Zn-diecasting
Bowl Polyamide - with metal bowl guard
Seals Nitrile rubber
Bowl capacity 25 cl (8.5 U.S.Fl.oz)
Filter porosity 25 µm or 5 µm
Technical information
This air preparation unit, which includes a lockable isolating valve as well as a filter, regulator,
lubricator and emergency valve is aimed at helping designers meet machinery safety standards
in accordance with European Directives.
Part no.
1
Series C4i, C15i, C25i
Combination Isolating Valve+F+R+L+Emergency Stop Valve Unit
Series C25i G 3/8, G 1/2, G 3/4, G 1
Security series
2
Series C4i, C15i, C25i
Accessories for modular Ci and Ecoline series
Flanges with threaded ports (in pairs) and flanges with push-in connectors
Series Part no. Part no. Part no. Part no. Part no. Part no.
G1/8 G 1/4 G 3/8 G 1/2 G 3/4 G1
C4i 5351006002 5351006012 5351006022 – – –
C15i – 5351026002 5351026012 5351026022 – –
C25i – – 5351036002 5351036012 5351036022 5351036032
Materials: Zn-diecasting for G 1/8 to G 3/4, aluminum for G 1.
Series Part no. Part no. Part no. Part no. HGØ8 H G Ø 10 H G Ø 12 H G Ø 14
Tube Tube Tube tube
8 mm dia. 10 mm dia. 12 mm dia. Ø 14 mm
C4i 5351006082 5351006092 – – 22,5 27,5 – –
C15i – – 5351026082 5351026092 – – 25,5 27,5
C25i – – – – – – – –
Materials: Zn-diecasting - thermoplastic - Screws galvanized steel - Seals nitrile.
Series Part no. Part no. Part no. Part no. Part no. Part no.
NPT 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1
C4i 8901700002 8901700012 8901700022 – – –
C15i – 8901700032 8901700042 8901700052 – –
C25i – – 8901700062 8901700092 8901700072 8901700082
Series A B C D E F G I J K H H H H H H
G1/8 G 1/4 G 3/8 G 1/2 G 3/4 G1
C4i 44 22 18,5 37 40,5 5 11,5 4,2 27 4,5 10 12,5 12,5 – – –
C15i 60 30 30,5 61,5 64 7 14 5,1 39,1 11 – 12 16 16 – –
C25i 72 36 34 68 71 8,5 17 6,3 40 8 – – 14,5 18 18 28,5
1
Threaded ring
1
Mounting bracket
1
Silencer, sintered bronze, with thread
1
Silencer, porous polyethene, with thread
Part no. G to ISO 228/1 L1 L2 Ø D [mm] Sound pressure level Reduction in flow %
to DIN 45 635
4381000000 M5 17 4,5 6,5 55 3,5
4381100000 G 1/8 24 5 13 69 1
4381200000 G 1/4 31 7 17 68 8,5
4381250000 G 3/8 53 11 19 69 27
4381300000 G 1/2 53 11 26,5 68 17
4381400000 G 3/4 113 16,5 38 72 31
4381500000 G1 136 20 49 76 18
Materials; PP, PE porous.
Working pressure p max.: 10 bar. (145 psi)
Ambient temperature range: –25 °C to +50 °C (–13 °F to 122 °F).
1
Self-cleaning silencer
Thread ISO 228/1 Part no.
G 1/8 8901702890
G 1/4 8901702900
G 3/8 8901702910
G 1/2 8901702920
G 3/4 8901702930
G1 8901702940
1
Diverting module (1 port) - Series C4i and C25i
1
Pneumatic pilot port G 1/4
1
Locking system with key
1
Connecting flange for assembly of two units
Series Part no.
C4i 5351006072
C15i 5351026072
C25i 5351036072
1
Clip for fixing into DIN rail
Series Fig. Part no.
C4i 1 5351003502 ¹)
C15i 2 5351023502 ²)
¹) - Set of 2 clips for an air
processing unit.
²) - Set of 4 clips for an air
processing unit.
For fixing an air processing unit
onto a DIN rail EN 50022
1
Support bracket (to be used when more than 3 modules in an assembly)
Series Part no.
C4i –
C15i –
C25i 3595828508
1
Extra accessories for flanges (Series C 15i only) - Plug
Series Part no.
C4i –
C15i 5351020404
C25i –
Material: Thermoplastic.
1
Extra accessories for flanges (Series C15i only) - Connection G1/8
Series Part no.
C4i –
C15i 5351022314
C25i –
Material: Brass.
1
Extra accessories for flanges (series C15i only) - Push-in connector 6 mm dia.
Series Part no.
C4i –
C15i 5351022322
C25i –
1
Ecoclip (for mounting an Ecoline unit)
Series Part no.
Ecoline 5351701004
Material: Thermoplastic.
1
Air inlet C4i (2 ports)
1
Air inlet C15i (2 ports)
1
Air inlet C25i (2 ports)
1
Automatic drain
Series Part no.
C4i 8901700102
C15i, C25i 8901700142
1
Series C4i, C15i, C25i
CAD library
Technical Characteristics
A library of products designed for the preparation of compressed air and in particular of "FRL
modules" sizes C4i, C15i, C25i.
This system, consisting of "dwg" indexes, is compatible with AutoCAD 10 and later versions. This
library uses the processes described in Autolisp and requires at 640 kB memory.
It consists of three 3"1/2 diskettes and a manual. The menus and the manual are written in three
languages "English, German, French".
It is possible for the user of AutoCAD LT to use the AutoCAD processes to insert the blocks
representing the different products. A ".txt" index gives the list of indexes representing the
different products in the function of the selected menu.
The drawings of the air treatment products are also contained in the general library 2D.
This library is presented on CD-ROM and usable with AUTOCAD starting version 12 and
AUTOCAD LT version 3 and 97. This library on CD-ROM contains also the files in DXF format.
1
Bosch Rexroth AG
Pneumatics
Ulmer Straße 4
DE-30880 Laatzen
Deutschland
Tel. +49 (0)511-21 36-0
Fax. +49 (0)511-21 36-269
sales-pneumatics@boschrexroth.de
www.boschrexroth.de