Professional Documents
Culture Documents
Monolithic Linear IC
Functions
• 5W × 2 channels (VCC = 18V, RL = 8Ω)
• Standby function
• Pop noise reduction function
• Ripple filter
• Thermal protection circuit
LA42000 series is power IC which made Pin compatible altogether in 5 to 15W. They consist of four kinds of power ICs
(mono, stereo, mono with volume function, stereo with volume function. They realized PCB layout communalization of an
audio power block of TV).
Channel
Model name PO Volume
Monaural Stereo
LA42051 5W {
LA42052 5W {
LA42351 5W { {
LA42352 5W { {
LA42071 7W {
LA42072 7W {
LA42152 15W {
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer' s products or
equipment.
Package Dimensions
unit : mm
3107B
Pd max - Ta
18
Al heat sink Mounting
Allowable power dissipation, Pd max - W
10
(11.8)
11.2
50×50×1.5mm3
6
5.8
4.5
4
No heat sink.
1.0 min
1 13
2
0.5 1.15 0.4
2.0 1.2 0
-20 0 20 40 60 80 100 120 140 160
(0.8) Ambient temperature, Ta - °C
SANYO : SIP13H
No.A0314-2/7
LA42052
Block Diagram
Standby VCC
5 7
IN1 2
12 OUT1
PRE Power
3 Thermal protection circuit 10
GND GND
REF amplifier
8 OUT2
IN2 4
Input amplifier Output amplifier
1 6
Ripple P.P
Filter
LA42052
No.A0314-3/7
LA42052
External Components
4. P.P (Pin 6)
The Pin 6 is Terminal for there being small pop sound
at the time of power supply ON/OFF. VCC
C4 recommends 4.7µF.
When capacitance is higher 10µF, the sound will not
be cut off when setting the power supply OFF. 5kΩ
6
C4 + 5kΩ
VCC – VCE (about 0.3V) – 5.6V 4.7μF
Pin 6 voltage = 2 +5.6V
No.A0314-4/7
LA42052
Usage Notes
1. Lightening (power supply - output short-circuit) and ground fault (GND - output short-circuit) protective circuits are
not incorporated. Due care must be taken during handling of the product.
2. The thermal protective circuit is incorporated and activated when the junction temperature (Tj) rises above about
160°C.
This circuit controls the output gradually to the attenuated condition.
3. Always ensure the sufficient margin for the supply voltage, etc. to operate the product within the area where the
maximum rating will never be exceeded. Namely, the maximum rating may be exceeded due to the slight change in
conditions, resulting in damage, if the product is used around the maximum rating.
No.A0314-5/7
LA42052
ICCO – VCC PO – VCC
80 10
RL = 8Ω Rg = 600Ω
Rg = 0 f = 1kHz
THD = 10%
Quiescent current, ICCO – mA
8
60
Output power, PO – W
6
40
20
2
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 4 6 8 10 12 14 16 18 20 22
Supply voltage, VCC – V Supply voltage, VCC – V
THD – PO THD – f
100 100
7 VCC = 18V 7 VCC = 18V
5 RL = 8Ω 5 RL = 8Ω
Total harmonic distortion, THD – %
1 1
7 10kHz 7
5 5
3 3
2 1kHz 2
– 10
–2
Rg = 10kΩ
– 20
–4
Response – dB
– 30
–6
–8 – 40
ch2
– 10 →c
– 50 h1
ch1
– 12 →c
VCC = 18V h2
RL = 8Ω – 60
– 14 Rg = 600Ω
– 16
VO = 0dBm (at f = 1kHz) – 70
10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k
Frequency, f – Hz Frequency, f – Hz
VNO – Rg SVRR – VCC
0.3 0
VCC = 18V RL = 8Ω
RL = 8Ω Rg = 0Ω
Output noise voltage, VNO – mVrms
VCCR = 0dBm
– 20 CVCC = 1μF
0.2
– 30
– 40
– 50
0.1
– 60
– 70
0 – 80
100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7 100k 4 6 8 10 12 14 16 18 20 22 24
Resistance for signal generation, Rg – Ω Supply voltage, VCC – V
No.A0314-6/7
LA42052
SVRR – fr SVRR – VCCR
0 0
VCC = 18V VCC = 18V
RL = 8Ω RL = 8Ω
– 10 – 10
Rg = 0Ω Rg = 0Ω
Ripple rejection ratio, SVRR – dB
– 40 – 40
– 50 – 50
– 60 – 60
– 70 – 70
– 80 – 80
10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2
Ripple frequency, fr – Hz Power supply ripple voltage, VCCR – Vrms
Pd – PO
8
RL = 8Ω
Rg = 600Ω
7 f = 1kHz
Power dissipation, Pd – W
0
0.1 2 3 5 7 1 2 3 5 7 10
Output power, PO – W
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of May, 2008. Specifications and information herein are subject
to change without notice.
PS No.A0314-7/7