You are on page 1of 2

Muhammad Waqas Afzal

 Email: vicky.engineer@yahoo.com .
 GSM: 0092-3335809693 & 3005580448
 Address: 21E Street 1 Phase 1 Ghauri Town Islamabad

SUMMARY:

Telecommunication Engineer with 10+ years of Experience on BTS/LTE, RNC/BSC & Core Network, Auto-CAD, LAN,
WAN, DSL and Routers

EXPERIENCE

Centre for Emerging Sciences, Engineering & Technology Islamabad (1st June 2016- 31st Dec 2019)
Worked as Telecom Engineer
Responsibilities/Skills Earned:
 Integrating BTS/LTE in the field and ensuring that basic tests are passed
 Designing and configuring the RNC/BSC and Interfaces
 Integrating BTS and BSC, BSC and Core network
 Monitoring the Performance of the network hardware and software
 Solving technical issues, working with radio planning as needed
 Setting and agreeing site design standards
 Working with all site supervisors and subcontractors to ensure their implementation
 Logistics
 Ensuring the rollout team & subcontractors have the required materials when needed

Hudson Antwerp, Belgium (23rd October 2015- 15th May 2016)


Worked as Electrical Supervisor
Responsibilities/Skills Earned:

 Perform Electrical Equipment sizing calculations and selection of equipment based on applicable standards
 Develop equipment specifications- cables, bulk materials, transformers, switchgears, control gear and all the necessary
supporting calculations and deliverables.
 Participate in Design Review Meetings, Vendor Meetings and lead technical workshops. Act as Technical Authority
on the
 Worked on making drawing of electrical wiring on Auto-CAD

COMWAVE Islamabad (5th September 2012- 15th October 2015)


Worked as Network Administrator
Responsibilities/Skills Earned:
 Maintenance of campus network incorporating LAN and WLAN last mile connectivity.
 Maintenance of access network based on Cisco 3560s, Cisco WLC 5800 and Cisco Aironet 1200/1400
series.
 Ensuring the connectivity with internet service providers to ensure fault tolerant 24/7 internet service and
maintained controlled network security with ASA 5550 and ASA 5520.
 Ensuring connectivity of computer labs to central data center with an uptime of 99.99 %.
 Analysis of growing user requirements and prepared expansion plans.
 Execution of assessment and acquisition of network hardware while ensuring support contracts with
vendors for quick resolution.
 Supervision of local IT technicians for routine troubleshooting.
 Designing network expansions and network deployment for new computer labs within the campus.
 Re-designing many network segments and VLANs ensuring reduced network congestions.
 Preparation of yearly expense plan for IT maintenance budget and presentation of annual report with next
year plans of recurring and development tasks.
 Delivering lectures of Computer Networks to Computer Science students.

Ministry of Information Technology, Islamabad (13th April 2011to 12th March 2012)
Worked under National Internship Program (Internee) in Data Communication Department

During this Period I received hands on Training in following areas:


 Providing Customers Support for DSL Related Issues
 Configuration and Trouble shooting at DSLAM, ATM Switch ect.
 Using Billing Software to get Customers Information

EDUCATION
 Masters of Science in EE(Comm. & Signal Processing) (2011 - 2012)
University Of Engineering & Technology, Taxila CGPA: 3.1/4

 Bachelors of Engineering Telecommunication (2005 - 2009)


Pakistan Engineering Council Registration No: TELE/2070 Marks: 77.18%

 DAE Electrical (2002 - 2005)


Govt. College of Technology Jhelum Marks: 68%
CERTIFCATIONS/WORKSHOPS

 Social Orientation Course (17th November 2015 to 17th February 2016)


Prisma Turnhut, Belgium
Topics: Society, Work, Self-reliance. Responsibility, Rights, Culture shock, Welfare, Knowledge, Values, Diversity,
Citizenship
 Dutch Language (Level 1.1 & 1.2) (9th November 2015 to 14th April 2016)
CVO Kempen Mol, Belgium

COMPUTER SKILLS
Working knowledge of

 MATLAB & Power World , MS-DOS, GW Basic & C-language,


 Microsoft Excel, Word & PowerPoint, Auto-CAD

You might also like