Professional Documents
Culture Documents
*版权由坚宜佳公司所有,严禁翻版和影印。
*本公司产品已申请中国专利,严禁仿制,违者负法律责任。
*2019年1⽉印刷
智 能 家 居建 筑 五 ⾦
扫 ⼀ 扫,了 解 更 多 资 讯
·
点⽀式玻璃幕墙配件典型产品⽬录
Point-fixedGlassWallFittingsTypicalProductCatalogue
点⽀式玻璃幕墙配件典型产品⽬录
⼴东坚宜佳五⾦制品有限公司
GUANGDONGKINEXHARDWAREPRODUCTSCO.,LTD
⼴东省东莞市塘厦镇⼤坪⻓塘街10号
ADD:No.10Changtang Street,Daping,Tangxia Town,DongGuan
City,GuangDong Province,China
T: 0086-769-8299 8666 8989 0388
F: 0086-769-8295 5251 8989 0189
E: mail@kinex.com.cn
H: www.kinex.com.cn
www.kinex.com.cn
智能家居·建筑五⾦
产品材质Productmaterial:
不锈钢铸造件:CF8M、CF8(执行标准:美国ASTM A743/A743M) (CF8M、CF8性能分别对应316、304)
Cast stainless steel: CF8M and CF8 (The standard executed: American Standard ASTM A743/A743 M ).
(The performance of casting stainless steel CF8M is corresponding to SS316, while for casting stainless steel CF8
is corresponding to SS304).
不锈钢型材加工件:316、304(执行标准:美国ASTM A276)
⽬录 Items made of profile machining stainless steel or non-cast stainless steel: SS316 and SS304.
表面 处理 效 果 02 Items made of carbon steel: Q235 and Q235B, etc. (The standard executed: GB/T700).
The surface finish
其余:请咨询坚宜佳公司。
浮头 式驳 接 头 03-04
Flat Cap Routel Other customized materials:Please consult KINEX Company.
夹具 24-28
Glass Clamp
注意事项Remark:
不锈钢所指的“不锈”指的是其在大气、水、酸、碱、盐等溶液或其他腐蚀介质中具有一定 化 学 稳 定 性 , 不 易 腐 蚀 和 生
沉头 式驳 接 头 05 锈,但并不是完全不会生锈。是否生锈受到其分子结构、加工工艺、使用环境等各因素的 影 响 。 为 最 大 程 度 的 避 免 不 锈
Countersunk Routel
吊夹 29-30 钢生锈,应注意以下几点:
Suspending clamp
The non rust of the stainless steel means it can have certain chemical stability around the corrosion mediums of air、water、
acid、alkali、salt or others. But it does not mean the stainless steel will never rust. Whether the stainless steel will rust or not is
influenced by the molecular structures, the processing technic, the operating environment and so on. To prevent the stainless
steel from rusting extremely, please pay attention to the following factors:
缝用 式驳 接 头 及铝 圈 06
Splice routel and Alu sleeve 拉索支撑杆 31
The Strut Bar for the Tension Cable 铸造件应按要求进行固溶处理;
应根据使用环境合理选用不锈钢牌号;
选用合理的表面处理方式;
转接 件 07 施工中应做好产品保护措施;
Connector 拉杆支撑杆 32
The Strut Bar for the Tension Rod 产品的设计或应用应避免积灰、积水;
定期对产品进行清洁,避免长期脏污。
The die and casting parts should be carried out the solution treatment according to requirements.
Choosing the reasonable stainless steel mark according to the operating environment.
驳接 爪 08-17 拉杆 33-34
Spider Tension Rod Selecting the reasonable surface treatment
不锈钢点⽀配件表⾯处理效果 驳接头Spider
Thesurfacefinishofthestainlesssteelaccessoriesfor
thepoint-fixedglasscurtainwall
亚光
satin
镜光
mirror ●技术参数Technicalparameters
轴 向 承 载 力 推 荐 值(N)负 风 压 径 向 承 载 力 推 荐 值(N)自 重
序号 型号
The design value of axial bearing The design value of radial bearing 可 偏 转 角 度 不 小 于
No. Model
capacity(N)(Negative air pressure) capacity(N)(The glass weight)
1 ATF11X、ATF12X 3000 1500
2 ATF13 3500 2000
3 ATF14 4000 2500
±5°
珍珠砂 4 ATC11、ATC12 3000 1500
pearlsandfinish 5 ATC13 3500 2000
6 ATC14 4000 2500
7 TJ11 6000 2500
8 TJ15 6000 2000
氟碳涂层
Fluorocarboncoating
光亮喷丸
brightshotblastingfinish
注:
1、 驳 接 头 、 转 接 件类 产 品 通 常 为 机 加 工 纹 路 , 不进行上述表面处理; 当实际使用长度L大于本图册中L长度或实际荷载大于表中的推荐值时,该款产品可能不符合您的工程需要,详情请
件 局 部 表 面 可 能 无 法 正 常 抛 光 ,建议采用其他表面处理方式或咨询坚宜佳公司。
2、 形 状 复 杂 的 配 件局 咨询坚宜佳公司。
Remark: When actual length “ L” is longer than that in our catalogue or actual loading value is bigger than the
1. products like connectors and routels are normally by machining way, so above surface finish is not adopted.
recommended one in the parameter sheet, the product may not meet your requirement, Please consult
2.As for the accessories of complex appearance and difficulty in polishing, it is suggested to adopt the other
surface finish or consult KINEX Company. KINEX for more details.
02/03
智能家居·建筑五⾦
浮头式驳接头FlatCapRoutel 沉头式驳接头CountersunkRoutel
ATF11X ATC11
ATF12X ATC12
ATF13 ATC13
ATF14 ATC14
04/05
智能家居·建筑五⾦
缝⽤式驳接头Spliceroutel 转接件Connector
TJ11 Z12
注:L标准长度为90
Note: Standard L=90
TJ15 Z13
注:L标准长度为90
Note: Standard L=90
铝圈2 AZ15
Sleeve2
注:L标准长度为90
Note: Standard L=90
Z16
玻璃开孔参考图ReferrenceDrawingfortheholedrilling
注:L标准长度为90
Note: Standard L=90
注:括号内的为参考值。Note:The value between the parentheses is for reference only.
06/07
智能家居·建筑五⾦
驳接⽖Spider A160A系列Series
A160A4
A160A2
A160A21
●技术参数Technicalparameters
轴 向 承 载 力 推 荐 值( N )负 风 压 径 向 承 载 力 推 荐 值( N )自 重
序号 型号 The design value of axial bearing The design value of radial bearing
No. Model capacity(N)(Negative air pressure) capacity(N)(The glass weight) A160A1
A200A系列Series A220A系列Series
A200A4 A220A4
A200A2 A220A2
A200A21 A220A21
A200A1 A220A1
A200A11 A220A11
10/11
智能家居·建筑五⾦
A250A系列Series A300A(B300A)系列Series
A250A4 A300A4(B300A4)
A250A2 A300A2(B300A2)
A250A21 A300A21(B300A21)
A300A1(B300A1)
A250A1
A250A11 A300A11(B300A11)
12/13
智能家居·建筑五⾦
A3060H系列Series GZ200XFB系列Series
A3060H4 GZ200XFB4
A
A
A-A(旋转)
GZ200XFB2
A
A3060H21
A-A(旋转)
GZ200XFB21
A3060H25
GZ200XFB1
A
A3060H11
A-A(旋转 )
GZ200XFB11
14/15
智能家居·建筑五⾦
可调组合⽖系列AdjustableSpiderAssemble S250C系列Series
4706K S250C4
A5006K S250C2
S250C21
S250C1
S250C12
16/17
智能家居·建筑五⾦
L210A系列Series L220A系列Series
L210A4 L220A4
L210A1 L220A1
L210A12 L220A12
L210A2 L220A2
L210A25 L220A25
18/19
智能家居·建筑五⾦
L250A系列Series L220B系列Series
L250A4 L220B4
L250A1 L220B1
L250A12 L220B12
L250A2 L220B2
L250A25 L220B25
20/21
智能家居·建筑五⾦
L250B系列Series L300系列Series
L250B4 L300C
L250B1
L300CY
L250B12
L300CN
L250B2
L250B25
22/23
智能家居·建筑五⾦
夹具GlassClamp 花形系列Flower-ShapedSeries
J120A11
J120A32
J120A42
J120A52
●技术参数Technicalparameters
序号 型号 轴向承载力推荐值(N)负风压 径向承载力推荐值(N)自重
The design value of axial bearing The design value of radial bearing
No. Mode capacity(N)(Negative air pressure) capacity(N)(The glass weight)
⽅形系列Square-ShapedSeries 矩形系列Rectangle-ShapedSeries
J120B11 J160A11
J120B32 J160A32
J120B42 J160A42
J120B52 J160A52
26/27
智能家居·建筑五⾦
⽖形系列Spider-ShapedSeries 吊夹Suspendingclamp
J300A11
●技术参数Technicalparameters
序号 型号 竖 向承载 力 推荐 值( N) 水平方向承载力推荐值(N)
No. Model Capacity recommended vertival values(N) Capacity recommended horizontal values(N)
1 DY11 4000 —
2 DY11B 4000 —
3 DY12 7000
—
4 BL31 12000
12000
5 BL32 —
12000
6 BL35 15000 15000
7 BL36
J300A32 — 15000
DY11
J300A42
DY11B
J300A71
DY12
28/29
智能家居·建筑五⾦
吊夹Suspendingclamp ⽀撑杆Strut
拉索⽀承结构常⻅形式
BL31
Thecommonstylesofthetensioncablesupportingstructure
BL32
BL35
SSA-11
SSA-21
BL36
SSA-31
SSA-12
30/31
智能家居·建筑五⾦
不锈钢拉杆
拉杆⽀承结构常⻅形式
Stainlesssteeltensionrod.
Typicalstylesoftensionrodsupportsystem
拉杆截⾯参数与⼒学性能
Sectionparametersandmechanicalperformanceoftensionrod
GA-1
GA-2
GA-31
GA-32
注:如果客户有需求,可生产其它直径拉杆,详情请咨询坚宜佳公司。
Remarks:The other diameter of tension rods are available, and for more details, please consult KINEX company.
32/33
智能家居·建筑五⾦
压制型不锈钢拉索
Thestainlesssteelcableofsuppression
材质 Material
配件
Product 钢绞线 索锚具、销轴 索头 生产范围
型号 Steel strand Swaged end with adjustor、Lock pin Anchor Production range
用户订购该产品时,其产品长度为如上图中两销钉中心距的尺寸。 Type
L is the length as your requirement (L means pin to pin)
34/35
智能家居·建筑五⾦
调节端 Adjustable swaged end: A01 球铰调节端 Adjustable ending of spherical hinge: C01
2205锚具(A01/B01) 2205锚具(M01/C01)
D d g h1 e f h L1 L2 L4 D M L L5 φD 1 H L2 L3
订货须知 各类扳⼿
Orderinformation Kindsofwrenches
用户订购该产品时,需注意以下事项:
1、其产品长度为上图中两销钉中心距的尺寸(L)。
2、一个调节端(A01)一般情况下可调拉索长度(L)参考下表格,如所需拉索L长度尺寸超出下表中的可调
拉索长度L值时,需增加调节套或咨询坚宜佳公司。
拉索直径ΦD φ8 φ10 φ12 φ14 φ16 φ18 φ20 φ22 φ24 φ26 φ28 φ30 φ32 φ34 φ36
可调拉索长度L(米) 5 5 10 10 10 10 16 16 16 16 20 25 25 25 25
3、需提供索施工时的预拉力值。
4、Φ8及Φ10钢索的索锚具压制外形为六角形。
When customers order the products, please pay attention to the following:
1. L is the length as your requirement (L means pin to pin).
2. The below format is the cable length that one adjusting and (A01) normally can adjust(L), if the needed cable length
is more than L of the below format, it need add adjusting anchors or consult KINEX company.
3. When purchasing this product, please supply the pretension of cable on site.
4. For Ф8 and Ф10 cable, the anchor is hexagon.
拉索常⽤组合样式如下图 声明:
1、 在 编 写 该 产 品 图 册 时 , 我 们 非 常 认 真 谨 慎 。 基 于 现 阶 段 对 产 品 的 认 识 和 理 解 , 我 们 认 为 图 册 中 所 提 供 的 信 息 是 正 确
样式一 Type I: A01-B01
可靠的。如果您认为有不妥之处,欢迎与我们联系。
2、 本 图 册 的 内 容 和 以 往 的 版 本 存 在 一 些 不 同 , 敬 请 谅 解 。 建 议 您 尽 量 根 据 我 们 的 最 新 图 册 选 用 产 品 。 如 果 您 认 为 某 些
原因必须选用我们以前版本中的产品,请事先与我们驻当地的办事机构联系,以便了解我 们 的 生 产 和 销 售 状 况 。
3、 在 该 图 册 出 版 之 后 , 我 公 司 可 能 会 对 某 些 产 品 进 行 改 进 , 不 影 响 使 用 功 能 时 , 恕 不 另 行 通 知 。 如 果 您 在 选 用 产 品
样式二 Type II: A01-A01 时,本图册中的产品不适合您的需要或存在一些疑问,请与我们驻当地的办事机构联系或访问我公司网站查询最新的
产品信息。
4、本图册的设计和信息受到版权保护,未经本公司的事先书面许可,其它厂商不得以任何 方 式 进 行 影 印 或 复 制 。
Statement:
1.We compiled this brochure carefully, and based on familiarity and understanding to our products at this stage, we
样式三 Type III : B01-M01-B01 think the information in this brochure is correct and workable, but if any dissidence exist in this brochure, welcome to
contact us.
2.Please kindly be informed that some information in this version is different from those in the previous versions, and
we propose that the product selection should be based on the latest version of KinEx brochures. If the product model
in the previous versions is needed, please contact the local KinEx office to get the latest information of our production
and sales.
样式 四 Type IV: A01-M01-A01 3.After issuing the current brochure version, KinEx will go on improving some of the products without prior
notification. If the product performance can't fulfill your requirement or you have some query about our products,
please contact the local KinEx office or visit KinEx website to get the latest product information.
4.The design & information on this brochure has been covered by the copyright protection and the printing & copy will
be forbidden without KinEx authorized documents.
38/39