Professional Documents
Culture Documents
For easy identification of popular pneumatic quick couplings use these actual size silhouettes
Industrial Interchange
Automotive Interchange
Quick Couplings
Lincoln Interchange
Aro Interchange
It is common to see quick couplings attached the tool and use the quick coupling between
directly to air tools so that users can quickly and the whip hose and the main supply hose (see
easily change tools. This is of course, the whole photo below). This isolates the tool vibration
point of quick couplings in the first place! However from the quick coupling.
if the tool vibrates (impact guns and chipping
hammers for example), the quick coupling nipple will Also shown in the picture is a G29R hose
“chatter” against the retaining balls in the coupler. restraint (also known as a whip check or
The hardened ball bearings will deform (dent) the safety cable), which is used to prevent the
ridge in the nipple—a process called brinnelling. supply hose whipping dangerously if the
Eventually the ridge will become high enough that coupling breaks or disconnects accidentally.
it will prevent the coupling from disconnecting. A
better practice is to attach a short whip hose to
Quick Couplings
Our Automotive Interchange quick couplers have been designed for superior
performance. These manual connect couplings are made from solid brass and
steel bar stock. Stainless steel balls and springs maximize corrosion resistance.
A tubular valve is standard for all body sizes for improved flow. Plugs are
machined from solid steel and brass. Steel plugs are hardened and zinc plated
to provide maximum service life.
Quick Couplings
CP1-42 J2S2 1/4" 1/4" $ 3.10 $ 2.80 10
CP1-44 J2S3 1/4" 3/8" 3.10 2.80 10
CP5-42 J3S2 3/8" 1/4" 5.10 4.60 10
CP5-44 J3S3 3/8" 3/8" 4.20 3.80 10
CP5-45 J3S4 3/8" 1/2" 5.10 4.70 10
CP9-45 J4S4 1/2" 1/2" 6.90 6.40 5
Quick Couplings
HOSE BARB NIPPLE
Hose
Size
CP21-42 D2S2 1/4" 1/4" $ 3.10 $ 2.80 10
CP21-42B(Brass) D2S2-B 1/4" 1/4" 3.70 3.40 10
CP21-43 D2S2.5 1/4" 5/16" 4.00 3.10 10
CP21-44 D2S3 1/4" 3/8" 3.10 2.80 10
CP21-44B(Brass) D2S3-B 1/4" 3/8" 4.20 3.90 10
CP25-42 D3S2 3/8" 1/4" 5.30 4.90 10
CP25-44 D3S3 3/8" 3/8" 4.40 4.00 10
CP25-45 D3S4 3/8" 1/2" 5.60 5.20 10
CP17-44 D4S3 1/2" 3/8" 5.40 4.90 5
CP17-45 D4S4 1/2" 1/2" 5.40 4.90 5
CP17-46 D4S6 1/2" 3/4" 8.50 7.60 5
Universal couplers are designed to accept the most common styles of 1/4”
nipples; Automotive, Industrial, and Aro. These couplers also interchange
with the European high-flow style offered by Cejn, OBAC, and Nitto.
The design of this coupler combines the easy push-to-connect feature
while still maintaining a sleeve coupler profile to prevent accidental
disconnection when hoses are dragged.
Injection mold couplings provide quick coupling for cooling and heating
hoses used on injection molding equipment. They are machined from solid
brass bar stock. Stainless steel balls, retaining ring, and spring provide
maximum service life. A high temperature silicone seal is standard.
Plugs are machined from solid brass and steel bar stock. Steel plugs are
zinc plated for superior corrosion resistance. Mold couplings are usually
installed by adding G21B or G2016 hose barb fittings - see Brass Section
of this Catalog. Where coupler must be valved, the valve and spring are
inserted and retained when the hose barb or other fitting is attached.
Our garden hose quick couplings are the heavy-duty answer to plastic
and brass residential garden hose quick disconnects. They are a straight-
through (no shut-off) design and feature brass bodies with garden hose
Quick Couplings
threads. The design utilizes an o-ring for more positive sealing compared
to other styles which use the same garden hose washer that seals the
threaded end. The sleeve is plated brass.
CST-GHT
Hose
Size
20SH 1/4" 1/4" $ 9.90
30SH 1/4" 3/8" 9.90
40SH 1/4" 1/2" 14.00
SH 400SH 1/2" 1/2" 38.60
600SH 1/2" 3/4" 41.90
800SH 1/2" 1" 48.20
20SH-SS 1/4" (Stainless) 1/4" 42.50
30SH-SS 1/4" (Stainless) 3/8" 45.00
40SH-SS 1/4" (Stainless) 1/2" 49.20
400SH-SS 1/2" (Stainless) 1/2" 83.00
600SH-SS 1/2" (Stainless) 3/4" 86.00
800SH-SS 1/2" (Stainless) 1" 139.30
Quick Couplings
800PH 1/2" 1" 13.90
20PH-SS 1/4" (Stainless) 1/4" 10.70
30PH-SS 1/4" (Stainless) 3/8" 11.90
40PH-SS 1/4" (Stainless) 1/2" 14.90
400PH-SS 1/2" (Stainless) 1/2" 29.60 PH
600PH-SS 1/2" (Stainless) 3/4" 34.50
800PH-SS 1/2" (Stainless) 1" 53.00
CPST1SS
STAINLESS STEEL MALE NIPPLE
CPST1SS E1M1-SS 1/8" $ 11.50 1
CPST3SS E2M2-S 1/4" 12.60 1
CPST5SS E3M3-S 3/8" 17.70 1
CPST7SS E4M4-S 1/2" 25.90 1
CPST2
PLATED STEEL FEMALE NIPPLE
CPST2 E1F1 1/8" $ 2.60 $ 2.30 5
CPST4 E2F2 1/4" 1.50 1.30 5
CPST6 E3F3 3/8" 1.60 1.40 5
CPST8 E4F4 1/2" 3.80 1
CPST10 E6F6 3/4" 9.30 1
CPST12 E8F8 1" 18.30 1 CPST2B
Quick Couplings
CPST10B E6F6-B 3/4" 8.70 1
CPST12B E8F8-B 1" 18.00 1
C100 couplings are compliant with the ISO-7241-B standard. They also
interchange with the following Manufacturer's: Snaptite 72, Hansen HK,
Parker 60, Faster HNV, & Areoquip FD45. Larger sleeves on this manual
connect and disconnect provide rugged resistance to deformation. Steel
sleeves are hardened to provide maximum service life. Machined from
solid brass, steel, and 303 stainless steel bar stock. Stainless steel
balls, retaining rings, and springs provide maximum service life. Steel
and stainless steel units incorporate a Teflon back-up ring to withstand
dynamic impulse. A backup o-ring seal is standard in all brass and 1-1/4"
size units and above. Buna-N (Nitrile) seals are standard. Steel Plugs are
hardened and zinc plated to provide heavy duty performance.
Quick Couplings
C109-16 8HDC 1" Polyurethane 6.00 5
These couplers and nipples come equipped with special seals for steam
service. The coupler is also provided with a zinc plated steel flanged
sleeve for ease of handling with gloved hands. C111B
C112B
C200 couplings are compliant with the ISO-7241-A standard. They also
interchange with the following Series: Snaptite 61, Hansen IA, Parker
6600, Faster ANV, & Aeroquip FD56(5600). The manual connect and
disconnect are machined from solid steel bar stock. Steel sleeves are
hardened to provide maximum service life. Stainless steel balls, retaining
rings, and springs provide maximum service life. All units incorporate
a Teflon backup ring to withstand dynamic impulse. Buna-N (Nitrile)
seals are standard. Steel Plugs are hardened and zinc plated to provide
heavy duty performance.
C302
C308
Quick Couplings
C309-04 T2DC 1/4" $ 12.50 $ 11.20 5
C309-06 T3DC 3/8" 12.70 11.40 5
C309
C401
C401… AGRICULTURAL INTERCHANGE COUPLER
C401-04 S25A-2 1/4" 1/4" $ 16.70 $ 15.10 5
C401P-04 S25A-2P 1/4" 1/4" 17.50 15.90 5
C401-06 S25A-3 3/8" 3/8" 19.40 17.60 5
C401-08 S25-4 1/2" 1/2" 19.20 17.60 5
C401P-08 S25-4P 1/2" 1/2" 24.40 22.00 5
C401-12 S25F-6 3/4" 3/4" 48.80 1
C401-16 S25-8 1" 1" 63.70 1
C406
C404… O-RING BOSS NIPPLE
Female ORB
Quick Couplings
C4O2
C404
C406MR
Our connect under pressure Wing Nut style couplings are interchangeable
with the following Manufacturers: Parker 6100, Faster FB, Areoquip 5100,
Snaptite 78, and Hansen 96. Stainless steel retaining rings maximize
corrosion resistance and extend service life. The internal sleeve seal
incorporates a Teflon back-up ring on the valve sleeve to extend service
life. This Non Spill coupling provides minimal air inclusion and fluid
loss.
C500H Heavy-Duty Wing Nut couplings are found in oilfield and mining
applications where high pressure, shockloads, or external abuse make
other couplings unsuitable. These robust couplings are rated to 5000 psi
and interchange with Snap-Tite 75 series and Hydraulics Inc 5TV style.
Seals can easily be replaced in the field (even the valve seal). C500H
couplings comply with Det Norske Veritas North Sea standards.
Quick Couplings
years. They interchange with Parker/Bruning SM series and Aeroquip
FD48 series and are often found on material handling equipment, small
tractors, and hydraulic presses. This series is rated at 3 GPM flow rate
and for 6000 psi maximum operating pressure.
C700
C710 series Flush -Face couplings interchange with Snap-Tite 71 series C711
and comply with Det Norske Veritas North Sea standards for coupling
application.
C719
Our C800 design interchanges with the following Series: Snaptite H, and
Faster TNV. This manual connect and disconnect is machined from solid
steel bar stock (also available in Brass and 316 stainless steel). Stainless
steel balls, retaining rings, and springs maximize corrosion resistance
and extend service life. All units incorporate a Teflon backup ring to
withstand dynamic impulse. Also available in valved and non-valved,
NPTF, BSPP, ORB, and larger sized configurations. Buna-N (Nitrile) seals
are standard. Steel plugs are induction hardened and zinc plated to
provide heavy duty performance.
Quick Couplings
Part Cross Body Thread PRICE
Number Reference Size Size EACH