Professional Documents
Culture Documents
1ST INTERNAL em
1ST INTERNAL em
CO 1:Learned about the basic transducer, terminating devices and methods , calibration principles
CO 2:Knowledge about the strain measurements and force measurement and torque measurement.
CO 3Knowledge about pressure measurement, temperature measurement , flow measurement.
CO 4: Knowledge about the displacement measurement and motion measurement.
CO 5: Knowledge about the digital techniques in mechanical measurement.
Knowledge level: K1 – Remember, K2 – Understand, K3 – Apply, K4 – Analyse& K5 - Evaluate
PART- A 10 X 2 = 20
1.what are the different types of crystal structure? [CO1, K3]
2. what are the steps involved for preparing a specimen. [CO1, K3]
3.what are the types of solid solution. [CO1, K3]
4. what is the necessity of etching while preparing a speicimen. [CO1, K3]
5. define atomic packing factor. [CO1, K3]
6. define microstructure & advantages of gamma ray radiography over X-Ray radiography? [CO2, K3]
7. what is meant by phase diagram. [CO2, K3]
8. state the types of equilibrium phase diagram. [CO2, K3]
9. define peritectic and eutectoid reaction. [CO2, K3]
10. what is mean cooling curves? [CO2, K3
PART- B 3 X 10 = 30
Answer any THREE Questions
1. Describe with a neat sketch explain the B.C.C with Unit cell and atomic packing factor. [CO1, K2,K3]
2. what is mean solid solution and explain types of solid solutions with a neat sketch. [CO1, K2,K3]
3. explain the following types of reactions [CO2,K2, K3]
a) Eutectic b) eutectoid c) Peritectic iv) peritectoid.
4. with a neat sketch explain the phase diagram of the pure substance. & write any 5 terminology used in
phase diagram. [CO2, K2, K3]
***** There is no substitute for hard work- All the best*****