You are on page 1of 2

Page 1 of 3

INSPECTION CHECKLIST FOR ACMV SERVICES

PROJECT :
Location : Conformance
to Specs./Stds
Start of Inspection Tick Cross Non-conformance Corrective Signature
Date : for for (with identity of Action / of Checker
Time : Yes/ No / Systems / Element/s) Taken & Date
End of Inspection OK! Not OK?
Date : OK! (Y/N)
Time :
Duct Work
Approved material (G.I.
1
sheet & insulation)
2 Install as per plan
3 Sufficient height
4 Correct sizes & gauges
5 Proper joint & seams
6 Type of support
Adequate support /
7
bracket
8 Proper insulation
9 method
Proper fire-rating (if
applicable)
10 Proper acoustic
treatment (if applicable)
Splitter, dampers, vents
11
provided
12 Leakage test
13 Balancing test
Pipe Work
1 Approved material
2 Install as per plan
3 Sufficient height/correct
level
4 Correct sizes
5 Proper joint
6 Type of support
Adequate support /
7
bracket
8 Proper insulation
9 Proper accessories
10 Painting
11 Hydraulic pressure test
12 Balancing test
Checked by : Date :
Name & Signature of Engineer / Foreman
Verified by : Date :
Name & Signature of Client's Representative

You might also like