Professional Documents
Culture Documents
Electrical Networks
MESP 012000-02
TECHNICAL SPECIFICATION FOR ELECTRIC
CABLE – 22 kV, SINGLE CORE, 95mm2 COPPER
Version: 1
Approved By:
George Marulli
PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION
ELECTRICAL NETWORKS SPECIFICATION
TECHNICAL SPECIFICATION FOR ELECTRIC CABLE
22 kV, SINGLE CORE, 95mm2 COPPER
MESP 012000-02
Version: 1 Effective from: 18th March 2014
L2-ELN-SPE-026
Approval
Amendment Record
Approving Manager: Electrical Network Asset Manager Approval Date: 18/03/2014 Next Review Date: 18/12/2016
PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 2 of 7
ELECTRICAL NETWORKS SPECIFICATION
TECHNICAL SPECIFICATION FOR ELECTRIC CABLE
22 kV, SINGLE CORE, 95mm2 COPPER
MESP 012000-02
Version: 1 Effective from: 18th March 2014
L2-ELN-SPE-026
Table of Contents
1. Purpose ............................................................................................................................. 4
2. Abbreviations.................................................................................................................... 4
3. Definitions ......................................................................................................................... 4
6. Testing .............................................................................................................................. 5
6.1 Type Test .......................................................................................................................... 5
6.2 Factory Tests .................................................................................................................... 5
6.3 Test Certificate .................................................................................................................. 5
6.4 Tests after Delivery ........................................................................................................... 5
7. Warranty ............................................................................................................................ 5
Approving Manager: Electrical Network Asset Manager Approval Date: 18/03/2014 Next Review Date: 18/12/2016
PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 3 of 7
ELECTRICAL NETWORKS SPECIFICATION
TECHNICAL SPECIFICATION FOR ELECTRIC CABLE
22 kV, SINGLE CORE, 95mm2 COPPER
MESP 012000-02
Version: 1 Effective from: 18th March 2014
L2-ELN-SPE-026
1. Purpose
This document is the MTM technical specification for a 22 kV, Single Core, 95 mm2 Copper
Conductor, XLPE Insulated, Screened and PVC/HDPE Sheathed Cable.
The primary use of the Cable is between equipment within an MTM Traction Substation,
where the fault rating is required to be 500 MVA. This may be indoors, or exposed
outdoors.
2. Abbreviations
MTM - Metro Trains Melbourne
3. Definitions
For all technical terms refer to AS/NZS 1429.1.
Shall Is used as the descriptive word to express a requirement that is
mandatory to achieve conformance to the standard.
Should Is used as the descriptive word to express a requirement that is
recommended in order to achieve compliance to the standard.
should can also be used if a requirement is a design goal but not
a mandatory requirement.
4.1 Standards
The cable shall comply with AS/NZS 1429.1 2006 Electric Cables – Polymeric Insulated,
Part 1: for working voltages 1/9/3.3 (3.6) kV up to and including 19/33 (36) kV.
Note: All materials and components shall comply with the relevant Australian Standard or,
where these do not exist, with the relevant IEC or EN Standard.
Approving Manager: Electrical Network Asset Manager Approval Date: 18/03/2014 Next Review Date: 18/12/2016
PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 4 of 7
ELECTRICAL NETWORKS SPECIFICATION
TECHNICAL SPECIFICATION FOR ELECTRIC CABLE
22 kV, SINGLE CORE, 95mm2 COPPER
MESP 012000-02
Version: 1 Effective from: 18th March 2014
L2-ELN-SPE-026
6. Testing
7. Warranty
The Cable shall be warranted by the Supplier against faulty design, materials, processing
and workmanship for a minimum of two years after delivery
Approving Manager: Electrical Network Asset Manager Approval Date: 18/03/2014 Next Review Date: 18/12/2016
PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 5 of 7
ELECTRICAL NETWORKS SPECIFICATION
TECHNICAL SPECIFICATION FOR ELECTRIC CABLE
22 kV, SINGLE CORE, 95mm2 COPPER
MESP 012000-02
Version: 1 Effective from: 18th March 2014
L2-ELN-SPE-026
Approving Manager: Electrical Network Asset Manager Approval Date: 18/03/2014 Next Review Date: 18/12/2016
PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 6 of 7
ELECTRICAL NETWORKS SPECIFICATION
TECHNICAL SPECIFICATION FOR ELECTRIC CABLE
22 kV, SINGLE CORE, 95mm2 COPPER
MESP 012000-02
Version: 1 Effective from: 18th March 2014
L2-ELN-SPE-026
Sheath
Material and Type ………………………
Colour ………………………
Thickness (mm) ………………………
Carbon Content (%) ………………………
Ultra-Violet Stabilised YES / NO
Current Rating of Cable
Continuous Current rating (A) ………………………
One Minute Current Rating (A) ………………………
Short Circuit Current Rating (1 second)
Conductor (kA) ………………………
Metallic Screen (kA) ………………………
Maximum Conductor Temperature
At Continuous Current Rating ( C) ………………………
At Short Circuit Current Rating ( C) ………………………
Maximum Metallic Screen Temperature
Screen Transient Maximum Temperature ( C) ………………………
Weights
Weight Of Cable (kg/m) ………………………
Weight of Drum (kg) ………………………
Dimensions of Drum
Outside Diameter (m) ………………………
Width (m) ………………………
Diameter of Barrel (m) ………………………
Nominal Length of Cable on Drum (m) ………………………
Approving Manager: Electrical Network Asset Manager Approval Date: 18/03/2014 Next Review Date: 18/12/2016
PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 7 of 7