Professional Documents
Culture Documents
User manual
MN.00308.E - 001
The information contained in this handbook is subject to change without notice.
Property of Siae Microelettronica. All rights reserved according to the law and according to the international
regulations. No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without written permission from Siae Microelettronica S.p.A.
Unless otherwise specified, reference to a Company, name, data and address produced on the screen dis-
played is purely indicative aiming at illustrating the use of the product.
MS-DOS®, MS Windows® are trademarks of Microsoft Corporation.
HP®, HP OpenView NNM and HP–UX are Hewlett Packard Company registered trademarks.
UNIX is a UNIX System Laboratories registered trademark.
Oracle® is a Oracle Corporation registered trademark.
Linux term is a trademark registered by Linus Torvalds, the original author of the Linux operating system.
Linux is freely distributed according the GNU General Public License (GPL).
Other products cited here in are constructor registered trademarks.
Contents
Section 1.
ODU ASN FLANGES 3
Section 2.
LISTS AND SERVICES 7
3 ASSISTANCE SERVICE............................................................................................... 9
MN.00308.E - 001 1
2 MN.00308.E - 001
Section 1.
ODU ASN FLANGES
Purpose of this document is to explain how changing the flange mounted on a ASN ODU in order to mount
a different one.
Both flanges are mounted on ASN ODU using four M6 screws, SIAE code M06614 (part C in Fig.1 and Fig.2).
1.2 TOOLS
The tool necessary for flange mounting is a 10mm spanner, the coupling torque is 9.25 Nm.
MN.00308.E - 001 3
1.3 MOUNTING A FLANGE ON THE ASN ODU
As in Fig.1, align the flange A with the four holes on the ODU near the waveguide flange.
As in Fig.2, align the flange B with the four holes on the ODU near the waveguide flange.
Unscrews the four screws that secure the Standard Lock flange to the ODU and proceed as in paragraph
1.3.2 Fast Lock flange.
Unscrews the four screws that secure the Fast Lock flange to the ODU and proceed as in 1.3.1 Standard
Lock flange
4 MN.00308.E - 001
A
MN.00308.E - 001 5
6 MN.00308.E - 001
Section 2.
LISTS AND SERVICES
2 LISTS OF FIGURES
MN.00308.E - 001 7
8 MN.00308.E - 001
3 ASSISTANCE SERVICE
For more information, refer to the section relevant to the technical support on the Internet site of the com-
pany manufacturing the product.
MN.00308.E - 001 9
10 MN.00308.E - 001