You are on page 1of 16

KILL

With Benzalkonium Chloride. (1,000ppm)


KILL

Active ingredient is recommended by :

Singapore

Benzalkonium Chloride.
Dosage recommended to effectively kill
coronavirus is 500ppm.
Sihat Virucidal Disinfectant dosage:
1,000ppm.
RUST 不具腐蚀性于任何金属表面
Non-Corrosive on any metal surface

FIGHT C VID-19
Concentrate Ready To Use
(Mixing Ratio 1 : 10)

 Kills 99.9% bacteria


 Kills viruses, fungi and algae
 Non-alcohol (Water Base)
 Non-flammable
 Non-corrosive
 Neutral pH level of 7-8
Packing : 5L & 20L
 Based on quaternary ammonia compound
(QAC)/ Benzalkonium Chloride.

 Active ingredient is recommended by NEA


(National Environment Agency) Singapore or
ECDC (European Centre for Disease
Prevention and Control) to kill coronavirus.
Dosage recommended to effectively kill
coronavirus is 500ppm. Sihat Virucidal
Disinfectant dosage: 1000ppm.

 In case of any slight irritation on body or eyes,


just rinse with water.
 Non-corrosive The advantages compared to
sodium hypochlorite which is corrosive.
Sodium hypochloride may cause corrosion to
machineries, electronic & electrical
equipments, furnitures and etc.

 Non-flammable (can be widely used in most


areas (it does not contain alcohols or any
combustion elements which is HIGHLY
flammable.)
• Not recommended to be mixed with other
chemicals, in order to avoid any negative
influences on the active ingredients.

• Avoid anionic compounds.

• Sihat Virucidal Disinfectant (Concentrated) has


to be diluted before used. The mixing ratio with
water is 1:10 (refer next page)
Concentrate

Packing : 5L & 20L


School Use

Retail / Shop Use

Factory Use

Clinic Use

Kindergarten Use
Concentrate Ready To Use
Public Transport Use *Avoid contact with food
DIY Disinfectant
消毒防护,您也可以做到

FIGHT C VID-19
FIGHT C VID-19
FIGHT C VID-19
 Kills 99.9% bacteria
 Kills viruses, fungi and algae
 Non-alcohol (Water Base)
 Non-flammable
 Non-corrosive
 Neutral pH level of 7-8

FIGHT C VID-19
FIGHT C VID-19
FIGHT C VID-19

You might also like