Professional Documents
Culture Documents
Add 80-90% water to the concrete based on Mix CAC-Hyperfluid R 100 ensures that concrete
Design by weight. The correct quantity of CAC- remains workable in excess of 3 hours at 200C.
Hyperfluid R 100 should be measured with Workability loss is dependent on temperature,
recommended dispenser and should be added to type of cement, nature of aggregates, the
the concrete with remaining mixing water. Allow method of transport and initial workability.
01 of 02
CAC‐Hyperfluid R 100
It is strongly recommended that concrete should The shelf life of the product is 1 year when
be properly cured particularly in hot and dry stored as recommended.
climates.
PACKAGING:
TECHNICAL PROPERTIES:
CAC-Hyperfluid R 100 is available in 260 kg
Appearance Light Brown Liquid drum and in tanker (9 MT) on demand.
Base material modified Poly-carboxylic
Ether STORAGE:
Specific Gravity 1.120 + 0.020
@250C CAC-Hyperfluid R 100 must be stored at
0
Chloride content Maximum 0.2% above 5 C temperature. Store under cover,
pH Minimum 6 protect it from direct sunlight. Failure to comply
with recommended storage condition may result
in premature deterioration of the product or
Mechanism of action:
packaging
Conventional Superplasticiser, based on
EFFECTS OF OVER-DOSAGE:
Sulphonated Naphthalene or Melamine
Formaldehyde condensates, at the time of A severe over-dosage of CAC-Hyperfluid R
mixing getting absorbed onto the surface of 100 will result in the following:
cement particles. This absorption takes place at
very early stage in the hydration process. The • Retardation of Setting Time
sulphonic groups of the polymer chains • Increase in workability / segregation
increases the negative charges on the surface of • Slight increase in air entrainment
the cement particle and the dispersion of the
SAFETY PRECAUTIONS:
cement occurs by Electrostatic Repulsion.
CAC-Hyperfluid R 100 is a non-toxic and
CAC-Hyperfluid R 100 is differentiated from
inflammable. When in contact with the skin, it
conventional superplasticisers in that it is based
should be washed with cold water.
on unique carboxylic ether polymer with long
lateral chains. This greatly improves the cement Disclaimer:
dispersion. At the start of the mixing process the The product information & application details given by the
company & its agents has been provided in good faith &
same electrostatic dispersion takes place as
meant to serve only as a general guideline during usage.
described above; but the presence of the lateral Users are advised to carry out tests and take trials to ensure
chains, linked to the polymer backbone, on suitability of products meeting their requirement prior to
full scale usage of our products. Since the correct
generate a Steric Hindrance which stabilizes the identification of the problems, quality of the other materials
cement particles capacity to separate & used and on-site workmanship are factors beyond our
control, there are no expressed or implied guarantee /
disperse. This mechanism provides fluid warranty as to the results obtained. The Company does not
concrete with greatly reduced water demand assume any liability or any consequential damage for
unsatisfactory results, arising from the use of our products.
with longer retention.
Ver.: CAC-H-R100/2/1112 02 of 02
Concrete Additives & Chemicals Pvt. Ltd.
Plot No.-W/11, TTC Industrial Area, MIDC,
Pawane, Navi Mumbai-400705.
Tel: +91-22-27681365 / 27632083, Fax:+91-22-27686787
Website: www.cac-admixtures.com AN ISO 9001 CERTIFIED COMPANY