Professional Documents
Culture Documents
DESCRIPTION
The ECM constantly generates a 5 V power source voltage from the battery voltage supplied to the +B (BATT) terminal to
operate the microprocessor. The ECM also provides this power source voltage to the sensors through the VC output circuit.
cardiagn.com
When the VC circuit has a short circuit, the CPU in the ECM and sensors that are supplied power through the VC circuit are
deactivated because power is not supplied from the VC circuit. When the system is in this condition, it will not start.
WIRING DIAGRAM
cardiagn.com
cardiagn.com
CAUTION / NOTICE / HINT
Note
After replacing the ECM, the new ECM needs registration (See page ) and initialization Click here.
PROCEDURE
PROCEDURE
1. CHECK CONNECTION BETW EEN GTS AND ECM
R esu lt
Condition Proceed to
Communication is not possible A
Communication is possible B
cardiagn.com
2. CHECK TER M INAL VO L TAGE (P OW ER SOUR CE OF ECM )
Component with harness connected
*a
(ECM)
St an dard Vo lt age
Specified
Tester Connection Condition
Condition
G84-1 (+B) - C56-
IG ON 11 to 14 V
7 (E1)
R esu lt
Proceed to
OK
NG
Tech Tips
If the result is not as specified, since current is not flowing to the +B terminals of the ECM, the system may
not be started.
OK
a. Discon n ect t h e t h rot t le posit ion sen sor con n ect or.
cardiagn.com
b. Tu rn t h e ign it ion sw it ch t o ON.
c. Tu rn t h e GTS on .
d. Ch eck t h e com m u n icat ion bet w een t h e GTS an d ECM .
Tech Tips
It can be checked using the "Engine" item of the Data List.
R esu lt
Result Proceed to
Communication is possible A
Communication is not possible B
e. R econ n ect t h e t h rot t le posit ion sen sor con n ect or.
Tech Tips
It can be checked using the "Engine" item of the Data List.
It can be checked using the "Engine" item of the Data List.
R esu lt
Result Proceed to
Communication is possible A
Communication is not possible B
e. R econ n ect t h e m an ifold absolu t e pressu re sen sor con n ect or.
cardiagn.com
b. Tu rn t h e ign it ion sw it ch t o ON.
c. Tu rn t h e GTS on .
d. Ch eck t h e com m u n icat ion bet w een t h e GTS an d ECM .Ch eck t h e M IL .
Tech Tips
It can be checked using the "Engine" item of the Data List.
R esu lt
Result Proceed to
Communication is possible A
Communication is not possible B
e. R econ n ect t h e accelerat or posit ion sen sor con n ect or.
Tech Tips
It can be checked using the "Engine" item of the Data List.
It can be checked using the "Engine" item of the Data List.
R esu lt
Result Proceed to
Communication is possible A
Communication is not possible B
a. Discon n ect t h e t h rot t le posit ion sen sor con n ect or.
cardiagn.com
b. Discon n ect t h e m an ifold absolu t e pressu re sen sor con n ect or.
c. Discon n ect t h e fu el pressu re sen sor con n ect or.
d. Discon n ect t h e accelerat or pedal posit ion sen sor con n ect or.
e. Discon n ect t h e ECM con n ect or.
f. M easu re t h e resist an ce accordin g t o t h e v alu e(s) in t h e t able below .
St an dard R esist an ce
Specified
Tester Connection Condition
Condition
C55-18 (VC) - Body 10 kΩ or
Always
ground higher
C56-2 (VCS) - Body 10 kΩ or
Always
ground higher
G84-26 (VCPA) - 10 kΩ or
Always
Body ground higher
G84-27 (VCP2) - 10 kΩ or
Always
Body ground higher
g. R econ n ect t h e t h rot t le posit ion sen sor con n ect or.
h . R econ n ect t h e m an ifold absolu t e pressu re sen sor con n ect or.
i. R econ n ect t h e fu el pressu re sen sor con n ect or.
j. R econ n ect t h e accelerat or pedal posit ion sen sor con n ect or.
k . R econ n ect t h e ECM con n ect or.
R esu lt
Proceed to
OK
NG
cardiagn.com
cardiagn.com