Professional Documents
Culture Documents
RELEASE
FOR IMMEDIATE RELEASE
August 8, 2017
Marketing contact:
Martin Van Der Linde
As expected, this information and control is all available for remote SCADA
through any of the inbuilt communications RTU protocols supplied as
standard in the NOJA Power Recloser. Whether you use DNP3, IEC 61850 or
the IEC 870-101/104 protocols, the NOJA Power Recloser Control Cubicle is
ready for integration into any control system.
NOJA Power's implementation of the Fault Locator standard allows for both
local (controller panel) forecast of the distance to fault, and the remote
reporting of fault parameters. This remote reporting of fault parameters
allows for the RC to be integrated into a more complex centralised system for
calculation of the distance to the fault. A selection of the available signals are
presented in Table 1 below.
1
PRESS RELEASE
NOJA Power’s OSM Recloser is supplied standard with a class leading sensor
array, including phase Current Transformers (CTs) and Voltage Transformers
(VTs) on all phases on both sides of the interrupter. These VTs are a
deployment of advanced engineering, providing exceptional accuracy across
the protection range and providing a myriad of automation capabilities as
standard. Not only does this precision allow for Fault Location, it even allows
the NOJA Power OSM Recloser to also deploy Synchronism Check as a
standard product feature available in every device.
“Fault location, either locally or centralised, is now possible using the RC10
and RC15 controls as a firmware upgrade,” reports NOJA Power Group
Managing Director Neil O’Sullivan. “If you have RC01 controls, you may like to
consider upgrading them to RC10 or RC15 controls connected to the 200
series OSM tanks to take advantage of all the RC10 and RC15 functionality
available.”