Professional Documents
Culture Documents
CONFIX LV
Low Viscosity Concrete Epoxy for Horizontal Application
PRODUCT DESCRIPTION:
TABLE 2: PHYSICAL PROPERTIES: CURED STATE
CONFIX LV is basically designed to have a low
viscosity features. This consistency, pourable and Parameters Results Remarks
self-leveling, makes it suitable for large areas of Tensile strength 4,500 ± 5000 psi ASTM 638
application, i.e. elevating floorings and patching Flexural strength 8,000 ± 5000 psi ASTM D79
damaged or degraded concrete structures. The user Compressive 8,000 ± 5000 psi ASTM D695
may add inert fillers or aggregates to meet the desired Hardness 70-90 Shore D
consistency and extend its coverage. Cured CONFIX Shrinkage negligible
LV exhibits durable, tough, shock or impact resistant Tack Free Time 4-6 hours
qualities. It is also water and chemical resistant. Water Absorption 0%
As Flooring:
Spread mixture with spatula, knife or trowel into areas
to be applied. For skid proofing, sprinkle or cast silica
grit or carborundum on the still tacky surface of the
applied mixture. Allow seeded floor to cure until firm,
then sweep or vacuum excess grits. Remove
projecting or loose aggregates by scraping the floor
with the edge of the trowel.
Cleaning
HEALTH PRECAUTIONS
Important Note:
The information contained in this leaflet is published to the best of our knowledge and is
supported by current available data. Hence, subject to the care and method of
application, deviations (from published values) in performance may occur. Our
guarantee is therefore limited to the quantity of the supplied material.