This document provides technical data for Confix Epoxy Cement, a three-part, epoxy-modified cementitious mortar for thin self-smoothing floor screeds between 1.5-3 mm thick. It can be used as a temporary moisture barrier or self-smoothing screed applied to concrete. The product has a pot life of 30 minutes, can be walked on after 15 hours, and fully cures within 7 days. It provides a smooth, protective finish and strong bond with concrete substrates.
This document provides technical data for Confix Epoxy Cement, a three-part, epoxy-modified cementitious mortar for thin self-smoothing floor screeds between 1.5-3 mm thick. It can be used as a temporary moisture barrier or self-smoothing screed applied to concrete. The product has a pot life of 30 minutes, can be walked on after 15 hours, and fully cures within 7 days. It provides a smooth, protective finish and strong bond with concrete substrates.
This document provides technical data for Confix Epoxy Cement, a three-part, epoxy-modified cementitious mortar for thin self-smoothing floor screeds between 1.5-3 mm thick. It can be used as a temporary moisture barrier or self-smoothing screed applied to concrete. The product has a pot life of 30 minutes, can be walked on after 15 hours, and fully cures within 7 days. It provides a smooth, protective finish and strong bond with concrete substrates.
3-part cement and epoxy combination mortar for self-smoothing floor screeds of 1.5 to 3mm
PRODUCT DESCRIPTION: Good leveling properties
RECOMMENDED FOR CONFIX EPOXY CEMENT is a three part; epoxy modified cementitious, fine textured mortar for self- As a Temporary Moisture Barrier (min. 2 mm thick) smoothing floor screeds in thin layers of 1.5 to 3 mm. allowing the application of Epoxy, Polyurethane and It is easy and quick to apply and forms an ideal resin floors requiring dry substrates, over high substrate for the application of self-leveling coatings. moisture content substrate, even green concrete, for a lasting solution. CONFIX EPOXY CEMENT may be coated after just As a self-smoothing screed for: 24 hours with epoxy or polyurethane systems, even if Leveling or patching horizontal concrete applied on concrete, which is not fully cured, damp or substrate subject to rising capillary damp. It impedes and prevents the formation of blisters and detachment of Leveling layer on rough concrete flooring or successive resin coatings. concrete flooring roughened by grinding Smoothing over damp concrete surface CONFIX EPOXY CEMENT is a solvent free product before applying epoxy or polyurethane supplied in pre-dosed packaging and is easy to apply coatings. to form a flat, smooth finish. Thin repair layers on the surface of damp The final performance characteristics of CONFIX substrates which do not require a EPOXY CEMENT guarantee an excellent bond with particularly attractive finish hardened concrete, even when not fully cured and still Repair and maintenance work on monolithic damp. or steam-cured concrete floors. The product is also particularly strong and has good PRODUCT SPECIFICATION resistance to chemicals in general. CONFIX EPOXY Appearance CEMENT offers excellent resistance to water and oil Part A–resin: Clear colorless liquid and resists attack from de-icing salts. It has improved Part B-hardener: Light amber opaque liquid chemical resistance over plain concrete in aggressive Part C-filler: Off-white aggregate powder environments, but is not designed as a chemical Finish Colour: Matte Light grey protection. CUSTOMER BENEFITS Chemical Base: Epoxy modified cementitious Rapid, easy application to form a smooth mortar finish, for internal and external use. Density: Part A: 1.16 kg/L Protective action against attack from de- Part B: 0.97 kg/L icing salts. Part C: 1.67 kg/L May be coated after just 24 hours with Part A+B+C mixed: 1.64 kg/L epoxy or polyurethane resin formulates Pot Life : ~30 min. Waiting Time: Excellent adhesion to concrete Can be walked on after : 15hrs Promote good adhesion with successive Light Mechanical loading after: 2days resin coatings. Fully cured after : 7 days Reduce the risk of blisters and/or Can be over coated with epoxy detachment of successive waterproof based materials as soon as coatings, even if applied on damp surface moisture content of substrates. CONFIX EPOXY CEMENT Excellent mechanical strength. is less than 4%, however not Solvent-free. earlier than : 1day Important Note: The information contained in this leaflet is published to the best of our knowledge and is supported by current available data. Hence, subject to the care and method of application, deviations (from published values) in performance may occur. Our guarantee is therefore limited to the quantity of the supplied material.
CONFIX EPOXY CEMENT Ver00: Date 04/11/2017 Page 1
TECHNICAL DATA SHEET CONFIX EPOXY CEMENT 3-part cement and epoxy combination mortar for self-smoothing floor screeds of 1.5 to 3mm
INSTRUCTION FOR USE
protecting from strong wind and do not expose to SURFACE PREPARATION: direct sunlight while fresh. Concrete surface must be free of dirt, paint, oil grease, lose materials and other contaminants. On oil PACKAGING surfaces, wash with soap and water or acid etching CONFIX EPOXY CEMENT is supplied in 3 (10% muriatic acid or hydrochloric acid) is components consisting of base, hardener, and filler. recommended. COVERAGE MIXING: Self-smoothing screed: Pour Part A and Part B in a suitable mixing container. CONFIX EPOXY CEMENT ~1.64 kg/m2/mm Mix well until uniform color are obtained. Add ~3.28 kg/m2 for a 2mm thick application gradually Part C to the solution while stirring with a slow speed electric mixer. Mix thoroughly until a Extended mortar mix uniform mix has been achieved with no lumps. CONFIX EPOXY CEMENT ~ 1.80 kg/m2/mm Mix only full units of A+B+C components. Do not mix These figures are theoretical and do not allow for any smaller amounts. Do not add water. additional material due to surface porosity, surface METHOD: profile, variations in level or wastage, etc. After thorough blending of mixture has been done, placed mixed CONFIX EPOXY CEMENT onto the STORAGE AND HANDLING primed substrate and spread evenly to the required Shelf Life thickness uniformly with a rubber or metal trowel or CONFIX EPOXY CEMENT has a shelf life of 1 year if spatula and immediately roll with a spike roller to stored in a dry cool place unopened. remove entrapped air obtain an even thickness layer. Storage Conditions Workability can be adjusted by varying slightly the Store in a dry condition away from sources of heat amount of Part C. and naked flames. If stored at high temperatures the Do not use additional water, which would disturb the shelf life will be reduced. surface finish and cause discolouration. HEALTH AND SAFETY CLEAN UP If skin contact occurs, wash with soap and water. If Clean all tools and application equipment with water skin irritation persists, seek medical attention. If immediately after use. Hardened / cured material can material contacts the eyes, flush thoroughly with water only be removed mechanically. and get medical attention immediately. Do not take internally. Keep material out of children’s reach LIMITATIONS FIRE If CONFIX EPOXY CEMENT is used as TMB CONFIX EPOXY CEMENT is non-flammable. (Temporary Moisture Barrier), a layer of a minimum 2 mm thick must be applied. Disposal Always ensure good ventilation when using CONFIX Spillages of component products should be absorbed EPOXY CEMENT in a confide space to remove into earth, sand or other inert material and transferred excess moisture. to a suitable container. Disposal of such spillages Freshly applied CONFIX EPOXY CEMENT must be should be in accordance with local waste disposal protected from damp, condensation, and water for at regulations. least 24 hours. Prevent premature drying by Important Note: The information contained in this leaflet is published to the best of our knowledge and is supported by current available data. Hence, subject to the care and method of application, deviations (from published values) in performance may occur. Our guarantee is therefore limited to the quantity of the supplied material.