Professional Documents
Culture Documents
Preliminary Round-Set 1
1) Amplitude limiter essentially a
c. Clamper
2) Waveguide acts as
c. HPF
3) Reflection coefficient is zero , then the line is
b. Short ckt
cb
6) Differentiation of time domain is equal to
a. Division by s in freq domain b. Multiplication by s in freq domain
c. Multiplication by e-st d. Multiplication by 1/e-st
7)50ohms line matched to 200 ohms load through quarter wavelength transmission, the
characteristic impedance of matched line should be
a. 75ohms b. 100ohms c. 200ohms d. 50ohms
8) Transfer function 1-s/1+s , it is known as
c. High pass system
9. A generator is feeding power to a transmission line of characteristic impedance Z0. The
line is terminated in impedance ZL. Standing waves will be set up if
d. both (b) and (c)
14. A counter type A/D converter contains a 4 bit binary ladder and a counter driven by a 2
MHz clock. Then conversion time
d. 8 μ sec
16. ZL = 200 Ω and it is desired that Zi = 50 Ω The quarter wave transformer should have a
characteristic impedance of
a. 100 Ω b. 40 Ω c. 10000 Ω d. 4 Ω
c. about 50 V
20. The number of memory locations in which 14 address bits can access is
d.16384
function The steady state error of the system due to a unity step input is :
a. K b. 1/K c. infinite d. Zero
25. The analog signal given below is sampled at 1200 samples per second. m(t) = 2 sin
120wt + 3 sin 240 wt + 4 sin 360 wt + 5 sin 480 wt + 6 sin 600 wt + 7 sin 720 wt. The folding
(maximum) frequency is __________ .
The analog signal given below is sampled at 1200 samples per second. m(t) = 2 sin 120 t +
3 sin 240 t + 4 sin 360 t + 5 sin 480 t + 6 sin 600 t + 7 sin 720 t. The folding
(maximum) frequency is __________ .
A. 300 Hz
B. 360 Hz
C. 600 Hz
D. 480 Hz
Answer: Option C
Explanation:
Folding frequency (max.) = = 600 Hz.