Professional Documents
Culture Documents
3.1 Introduction
Statistical process control (SPC) is one method of statistical quality control, and its content
control charts (Variables and Attributes).The figure (3.1) discuses some statistical tools that use
in quality control as shown below;
Tools For
Tools For Organization Determine
Tools Analysis And Check And Analysis The problems
And Sulution
Quality control process is start from design the product pass through the production producers
to customer. The list of these levels as below: -
1) Estimate the quality control characteristics (Design level).
In this level we are determine the types of characteristics and the most important
characteristics, and we can do this by the some statistical methods as Pareto diagram or flow
diagram.
2) Measure characteristics of product (Production level).
This is done by take samples from protection line, and applied the required measurements.
3) Evaluation and Analysis the variation between the result values and take the solution
(Evaluation and Solution Level).
This is done by quality control chart, to estimate the causes.