Professional Documents
Culture Documents
Tutorials Manual
Designing a high heel sandal
Autodesk Crispin ShoeMaker
Copyright © 2008 - 2015 Delcam Ltd. All rights reserved.
Powered by PowerSHAPE, copyright © 1982 - 2015 Delcam Ltd. All
rights reserved.
Delcam Ltd has no control over the use made of the software
described in this manual and cannot accept responsibility for any
loss or damage howsoever caused as a result of using the software.
Users are advised that all the results from the software should be
checked by a competent person, in accordance with good quality
control procedures.
The functionality and user interface in this manual is subject to
change without notice in future revisions of the software.
The software described in this manual is furnished under licence
agreement and may be used or copied solely in accordance with the
terms of such licence.
Delcam Ltd grants permission for licensed users to print copies of
this manual or portions of this manual for personal use only.
Schools, colleges and universities that are licensed to use the
software may make copies of this manual or portions of this manual
for students currently registered for classes where the software is
used.
Acknowledgements
This documentation references a number of registered trademarks
and these are the property of their respective owners. For example,
Microsoft and Windows are either registered trademarks or
trademarks of Microsoft Corporation in the United States.
Patent Information
Emboss functionality is subject to patent number GB 2389764 and
patent applications US 10/174524 and GB 2410351.
Morphing functionality is subject to patent application GB 2401213.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual Designing a high heel sandal using advanced power tools • 1
1 Click Import Data to display the model at the correct stage.
2 • Designing a high heel sandal using advanced power tools Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
The tutorials Designing a court shoe and Designing a sport
shoe both show how to create and edit a stencil on a last.
7 Press and hold the Shift key and click the heel at the
position shown:
Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual Designing a high heel sandal using advanced power tools • 3
8 Click to create seven more points of the style line, as shown:
9 Press and hold the Shift key and click the final point on
the centre line.
4 • Designing a high heel sandal using advanced power tools Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
10 Click Select .
Remember to hold down Shift when clicking the start and end
points.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual Designing a high heel sandal using advanced power tools • 5
2. Offset style lines
1 Click the style line.
4 Click OK.
6 • Designing a high heel sandal using advanced power tools Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
5 Click the style line.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual Designing a high heel sandal using advanced power tools • 7
9 On the Views toolbar, deselect Stencil.
8 • Designing a high heel sandal using advanced power tools Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
11 Click and drag the point shown .
12 Hold down Shift and move the cursor over the centre line, click
when the cursor changes to display the perpendicular cursor .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials Manual Designing a high heel sandal using advanced power tools • 9
14 Repeat steps 10 to 13 for the style line shown below;
10 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
3. Sketch style lines - 2
1 Click Sketch style line .
2 Click to create the two points shown:
3 Click Select .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 11
7 Click the points shown:
8 Click Select .
9 Right-click to clear the selection.
12 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
Creating style lines using advanced
power tools
4. Copy style lines in the flattened view
The model will then be provided with the correct data and you will
be able to complete the tutorial.
You can view the AVI for this step to see how the commands would
work.
*In most cases selecting an icon will inform you that the necessary
licence is missing. In some modules of ShoeMaker the icon(s) may
be missing entirely.
Style lines from the flattening window are used in the advanced
power tools mode to create the design of the sandal.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 13
2 Press and hold the Shift key and click the two style lines
shown below;
14 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
5. Repoint a curve
The model will then be provided with the correct data and you will
be able to complete the tutorial.
You can view the AVI for this step to see how the commands would
work.
*In most cases selecting an icon will inform you that the necessary
licence is missing. In some modules of ShoeMaker the icon(s) may
be missing entirely.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 15
Keep clicking the button until the toolbar shown below is
displayed.
16 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
The curve is shortened.
6 Click Select .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 17
9 Click Apply.
10 Click Cancel.
18 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
13 Click the left mouse button and drag a box, as shown:
14 Click the point and drag it so that it is on the main outline curve,
as shown:
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 19
15 Right-click on the curve, select Free tangents and magnitudes.
6. Pattern Curves
The model will then be provided with the correct data and you will
be able to complete the tutorial.
You can view the AVI for this step to see how the commands would
work.
*In most cases selecting an icon will inform you that the necessary
licence is missing. In some modules of ShoeMaker the icon(s) may
be missing entirely.
1 Click Curve.
20 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
3 Click away from the last outline to position the first point.
5 Click Select .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 21
Keep clicking the button until the toolbar shown below is
displayed.
22 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
7 Click Offset items .
8 Enter a Distance of 6.
9 Press Enter.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 23
10 Click Select .
11 Click Line.
15 Click Select .
24 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
16 Click the first curve, then press and hold the Shift key and click
the second curve.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 25
Keep clicking the button until the toolbar shown below is
displayed.
26 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
18 Click Create pattern of items .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 27
20 Click and drag the origin marker.
28 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
22 Click the curve.
24 Click OK.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 29
25 Click anywhere in the graphics area to deselect
The model will then be provided with the correct data and you will
be able to complete the tutorial.
You can view the AVI for this step to see how the commands would
work.
*In most cases selecting an icon will inform you that the necessary
licence is missing. In some modules of ShoeMaker the icon(s) may
be missing entirely.
30 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
1 Click Interactively Limit Wireframes .
3 Click Select .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 31
The curves are trimmed to the toe strap curve.
4 Press and hold the Shift key and click the curves shown:
5 Click Delete .
32 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
6 Click the curve.
10 Click Select .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 33
11 Drag a box around the curves.
34 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
14 Click OK.
The model will then be provided with the correct data and you will
be able to complete the tutorial.
You can view the AVI for this step to see how the commands would
work.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 35
*In most cases selecting an icon will inform you that the necessary
licence is missing. In some modules of ShoeMaker the icon(s) may
be missing entirely.
2 Click Wrap.
3 Click Yes.
4 Right-click to clear the selection.
36 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
5 Click Shoe modelling .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 37
8 Drag a box around the area shown:
10 If the point isn't on the style line, click and drag the point onto
the style line.
11 Repeat for the other end points.
38 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
9. Mirror style lines
1 Drag a box around the last to select all the style lines.
2 Press and hold the Ctrl + Shift keys and click the two style lines
shown below;
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 39
5 Click View ISO 1
8 Click Cut .
40 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
9 Click the style line where the other style line intersects it.
10 Click Select .
11 Repeat steps 7 to 10 for the style line shown:
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 41
Creating shoe pieces
10. Create shoe pieces
Pieces are created from the wrapped style lines.
1 Click Piece .
A piece is created.
42 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
5 Click the position shown:
7 Click Select .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 43
9 Click the positions shown:
44 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
12 Click Select outer face material.
If the red triangle isn't visible then the selected material will
be applied to all faces of the piece.
16 Drag and drop Autumn06 into the graphics window away from the
last.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 45
17 Double-click the piece.
18 Enter a Thickness of 1.
19 Click OK.
20 Click Paste attributes from Clipboard .
The Attribute Selection dialog is displayed.
46 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
21 Click all the options.
23 Click Select .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 47
24 Right-click to clear the selection.
25 Use the steps above to create the rest of the pieces on the
sandal.
If you have trouble creating the objects you can click Import
Data on the next step to open a model with the correct objects in it.
48 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
Creating folds
11. Create edge folds on the pieces
Folds will be added to the pieces to round the edges off, by using
the edges of the pieces.
1 Click Piece .
5 Click Fold .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 49
6 Click Select .
7 Repeat the steps above to add edges to all the other pieces
except the one shown:
50 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
If you have trouble creating the objects you can click Import
Data on the next step to open a model with the correct objects in it.
Creating stitches
12. Create edge stitches
The edges of the pieces are used to create stitches on the pieces.
2 Click Stitch .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 51
4 Click the piece.
52 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
7 Click Increase separation
8 Click Smaller .
9 Right-click to finish the command.
The stitch is created on the piece.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 53
11 Click the piece.
15 Click Smaller .
54 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
16 Right-click to finish the command.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 55
18 Click and drag a box around all of the stitches.
22 Drag and drop Autumn06 into the graphics window away from the
last.
56 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
23 Right-click to clear the selection.
Adding accessories
13. Add a buckle
Add a buckle accessory onto the ankle strap from a library of
accessories.
2 Click Piece .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 57
3 Click the piece.
5 Click Accessory .
6 Click Display mode below Stitch.
58 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
11 Click on the piece shown:
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 59
15 Click Smaller several times until it looks as shown:
16 Click Unblank .
17 Right-click to clear the selection.
1 Click Accessory .
60 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
6 Click Round.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 61
You may need to zoom-in.
11 Click Select .
The first and last points are not on the edge of the piece
but slightly inside the piece.
62 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
15 Click Metal tab.
16 Drag and drop material Metal 14 onto the accessory.
2 Press and hold the Shift key and click the piece (Solid
Piece_4) and the buckle.
3 Click Blank all but selected .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 63
5 Right-click to clear the selection.
64 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
9 Click near the centre of the buckle, on the piece:
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 65
11 Release the mouse when it is in the position shown:
12 From the Status Bar at the bottom of the screen, click the Z
principal plane.
66 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
16 Click Create a morph feature .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 67
17 Click Bezier curve .
19 Click Finish.
20 Click Finish.
68 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
21 Press and hold the Shift key and drag a box around the six points
shown:
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 69
The single point is now selected.
26 Click OK.
70 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
The strap has been morphed to create the lift for the buckle.
29 Click Delete .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 71
30 Click Accept changes and finish.
72 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
2 Drag a box around the area shown:
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 73
5 Click the three edges.
6 Click Fold .
7 Click Select .
8 Right-click to clear the selection.
1 Click Stitch .
Zoom into the buckle area if you have clicked Import data.
74 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
4 Click the edges.
8 Click Select .
9 Right-click to finish the command.
10 Drag a box over the stitches to select them.
14 Drag and drop Autumn06 into the graphics window away from the
last.
15 Right-click to finish the command.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 75
16 Click Accessory .
17 Click the buckle.
21 Click OK.
22 Right-click to clear the selection.
Zoom into the buckle area if you have clicked Import data.
76 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
1 Click the piece.
3 Click Punch .
4 Click Display mode below Accessory.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 77
Ensure the second is at the base of the prong.
7 Click Select .
78 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
12 Click Display mode below Punch.
1 Click Piece .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 79
5 Click the feather line in the two positions shown:
8 Click Sole .
80 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
10 Click Display mode below Last and Style line.
11 Drag a box over the end of the insock and insole to select them.
15 Drag and drop Autumn06 into the graphics window away from the
last.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 81
16 Right-click to clear the selection.
82 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
*\PS-TutorialsXXXXX\common_files\
dcshoe\h_sandal\dgk
(where XXXXX is the version number of the Tutorials and
* is the drive and path in which the Tutorials are installed.)
6 Select the following file:
Logo.bmp
7 Click Open.
8 Press and hold the Shift key, click and drag the node to
make the image smaller.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 83
10 Click the top surface of the insole.
2 Click Sole .
84 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
3 Click Create Heel .
4 Click No.
The Heel Creation dialog is displayed.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 85
A heel is added to the sandal.
6 Enter -4.3 in Scale the heel top-piece along the length of last.
7 Enter -7.9 in Scale the heel top-piece along the width of last.
8 Enter 16.9 in Top-piece stretching amount.
86 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
9 Click Side curvature tab.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 87
15 Drag and drop Autumn06 onto the main face of the heel.
88 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
The basic sandal is complete.
1 Click Levels .
The Level dialog is displayed.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 89
2 In Level 6 enter heel1.
3 Click OK.
4 Click the heel.
90 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
Creating a platform sole using
advanced power tools
23. Copy a surface from the midsole
Using advanced tools, you will copy a face from the solid used to
create the midsole and use it to create a platform sole.
6 Click Copy the selected faces from the Solid Edit toolbar.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 91
7 The surface is copied out of the midsole.
4 Click View.
5 Click Blank.
92 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
6 Click Blank Except.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 93
Ctrl + K is the short cut for Blank except.
7 Press and hold the ALT key and click the edge of the surface.
A composite curve is created around the edge of the surface
8 From the Status Bar at the bottom of the screen, click the Z
principal plane.
94 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
9 Click Surface.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 95
10 Click Extrusion .
96 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
The Extrusion dialog is displayed
12 Enter 20 in Length 2.
13 Enter 0 in Length 1.
14 Click OK.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 97
The direction of the extrusion surface is changed.
98 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
17 Click Accept changes and finish.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 99
8 Enter a Distance of 15.
9 Click Select .
10 Click Lateral 8.
100 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
11 Click Delete the Curve .
12 Click Lateral 3.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 101
14 Click Delete the Curve .
15 Click Lateral 2.
19 Click Select .
20 Click Lateral 2.
102 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
21 Press and hold the Ctrl key and click Lateral 5.
22 Click OK.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 103
26 Click Free tangents.
27 Click OK.
104 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
29 Click Show General Edits Options using the right mouse
button.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 105
30 Click Show the model fixing options .
The Model Fixing toolbar is displayed.
106 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
31 Click Surface trim region editing .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 107
32 Click the boundary curve.
33 Click Explode .
108 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
34 Click Surface trim region editing .
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 109
Keep clicking the button until the toolbar shown below is
displayed.
110 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
The Limit flyout is displayed.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 111
38 Click the extrusion surface.
40 Click Select .
112 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
42 Drag a box over the two surfaces.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 113
47 Right-click to clear the selection.
1 Click Levels .
The Level dialog is displayed.
114 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
2 In Level 7 enter heel2.
3 Click OK.
4 Drag a box across the two surfaces.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 115
1 Click Level 6 and 7 to turn them on.
2 Click the heel.
3 Click Delete .
116 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
8 Click View ISO 1
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 117
13 Drag and drop Autumn06 onto the back heel surface and then the
front heel surface.
14 Click Manufacture .
15 Click Display mode below Punch, Last, and Style-line.
118 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
Rendering an image of the shoe
28. Render the sandal
The model will then be provided with the correct data and you will
be able to complete the tutorial.
You can view the AVI for this step to see how the commands would
work.
*In most cases selecting an icon will inform you that the necessary
licence is missing. In some modules of ShoeMaker the icon(s) may
be missing entirely.
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 119
4 Click OK.
Summary
You have created a high heeled sandal from a last
You have done the following:
Sketched style lines on the last
Edited the style lines
Created new style lines using Advanced modelling tools
Created pieces with different thickness and offsets
Changed the materials of pieces
Created stitches
Created edge folds
120 • Designing a high heel sandal using advanced power toolsAutodesk Crispin ShoeMaker 2016 R1 Tutorials Manual
Created punches
Created accessories
Created a lifter for the buckle using Advanced modelling tools
Created an insock and midsole
Created and edited a standard heel
Used different levels to organize the heels
Created a platform sole using Advanced modelling tools
Created a second heel to match the platform sole
Created a rendered image of the completed shoe design
Autodesk Crispin ShoeMaker 2016 R1 Tutorials ManualDesigning a high heel sandal using advanced power tools • 121