Professional Documents
Culture Documents
Repair Facility
624 RAM-J WHISPAIR PD Blower Visit us online: www.fraserwoods.ca
Call 1-780-962-1827 for technical, application and sales support. Specifications
RAM™ WHISPAIR™ rotary blowers are heavy-duty units designed with Flow Range To 3244 CFM
integral-shaft ductile iron impellers having an involute profile. WHISPAIR Max ΔPressure 10 PSI
blowers reduce noise and power loss by utilizing an exclusive wrap-around Max ΔVacuum 16” Hg
plenum and proprietary WHISPAIR jet to control pressure equalization- Maximum RPM 3000
feeding backflow in the direction of impeller movement, thereby aiding Minimum RPM 1170
rotation. Max ΔT 230ᵒF
Inlet Connection Size 10” FLANGE
• Heavy‐duty unit with integral‐shaft ductile iron Discharge Connection Size 6” FLANGE
• impellers with an involute profile Shaft Dia. 2”
• Rigid one‐piece casing and headplates are grey iron Min Sheave Dia. 8.5”
• Drive end cover and end cover are aluminum Drive End Lubrication Oil
Carburized and ground alloy steel spur timing gears Gear End Lubrication Oil
• Cylindrical roller bearings Oil Sump Horiz Config 145 oz
• Piston rings reduce air leakage Oil Sump Vert Config 83 oz
• Lip type oil seals prevent lubrication from entering the Bare Unit Weight 975 lbs
air chamber Shipping Weight 1005 lbs
• Hydrodynamic seal on the drive shaft prevents oil leaks Shipping Container Wood Skid
• Splash oil lubricated gears on drive and gear ends Container Size (L x W x H) 54” x 32” x 36”
• Detachable steel mounting feet Shipping Options Ground Freight, Air or Sea
• Horizontal and vertical configurations available Also, available in:
RAM, RAM-GJ GAS WHISPAIR, RAM-VJ WATER SEALED EXHAUSTER
WHISPAIR and RAM, RAM-J, RAM-GJ with Plugged Impellers
© 2017 Fraserwoods Fabrication & Machining Ltd. 120 - 10293 276 Street, Acheson, Alberta, Canada T7X 6A5
T: +1(780) 962-1827 F: +1(780) 962-1830 E: sales@fraserwoods.ca www.fraserwoods.ca
Item Number Part Name Quantity
19 Key Square 1
21 Breather 2
22 Plug, Pipe 12
23 Screw, Cap Hex Hd. *
Call 1-780-962-1827 for technical, application and sales support. 27 Seal, Lip Headplate 4
28 Piston, Ring-Seal 4
624 RAM-J Approximate Oil Fill Amounts 29 Washer, Wavy Spring 2
Model No. / Gear Box Drive End 31 Gear Nut 2
Drive Shaft Location Fl. Oz. Liters Fl. Oz. Liters 32 Scr, Cap Hex Hd. 16
400 (Horizontal) 36 1.06 19 0.56 33 Seal, Lip Drive 1
400 (Vertical) 18 0.52 9 0.27 34 Brg. Clamp Plate – D.E. 2
600 (Horizontal) 95 2.81 50 1.48 35 Lock Washer – Spring 16
37 Sight Plug – Oil Level 2
600 (Vertical) 55 1.63 28 0.83
38 Sleeve, Shaft 4
These capacities are provided to assist stocking the correct amount of oil. Exact sump
capacity may differ slightly. Review the proper filling instructions in OEM Manual. 40 Slinger – D.E. (Top Drive) 1
46 Slinger – G.E. 1
Recommended Oil Grades 49 Oil Leader L/S 1
Ambient* Temp. ᵒF (ᵒC) ISO Viscosity No. 50 Oil, Leader – R/S 1
Above 90ᵒ (32ᵒ) 320 54 Brg Clamp Plate – G.E. 2
32ᵒ to 90ᵒ (0ᵒ to 32ᵒ) 220 60 Screw, Cap Butt. HD. 1
0ᵒ to 32ᵒ (-18ᵒ to 32ᵒ) 150 64 Pin, Spring 1
Below 0ᵒ (-18ᵒ) 100 66 Screw, Cap Hex HD. *
*Ambient temperature is defined as the temperature of the space blower and drive are 66.1 WHISPAIRTM, Spring Lock 3/8M *
located. 70 Shims D.E. Brg. 1
624 RAM-J Parts List: 4” and 6” Gear Diameter 75 Screw, Cap – Hex HD. *
Item Number Part Name Quantity 76 Blower Foot - RH 2
1 Headplate 2 77 Blower Foot - LH 2
3 Gearbox 1 85 Elb, Pipe-Black 2
4 Timing Gears 2 85.1 Plug, Pipe 2
5 End Cover 1 87 Scr, Cap BH 2
7 Gasket – Gearbox/Cover 2 88 Anti Rotation Ball 4
10 Shims LOT 90 BSHG-RDCG 2
11 Cylinder 1 91 Washer, Plain Flat 2
92 Washer, Plain Flat 2
12 Impeller & Shaft Drive 1
93 Washer 2
13 Impeller & Shaft Driven 1 94 Oil Leader 2
14 Bearing Roller 4 95 Cap Screw 4
16 Pin, Dowel (Pull Out) 4
17 Pin, Dowel 2
© 2017 Fraserwoods Fabrication & Machining Ltd. 120 - 10293 276 Street, Acheson, Alberta, Canada T7X 6A5
T: +1(780) 962-1827 F: +1(780) 962-1830 E: sales@fraserwoods.ca www.fraserwoods.ca
© 2017 Fraserwoods Fabrication & Machining Ltd. 120 - 10293 276 Street, Acheson, Alberta, Canada T7X 6A5
T: +1(780) 962-1827 F: +1(780) 962-1830 E: sales@fraserwoods.ca www.fraserwoods.ca
FRAME SPEED 4 PSI 6 PSI 8 PSI 10 PSI 12 PSI 15 PSI 18 PSI MAX. VACUUM
SIZE RPM CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP “HGV CFM BHP
1170 1006 25.1 921 37.1 849 49.1 786 61.1 - - - - - - 13.0 751 38.8
616 RAM-J 1750 1693 39.3 1608 57.2 1536 75.0 1473 92.8 - - - - - - 14.0 1394 63.0
3000 3173 77.6 3088 107.3 3016 137.1 2953 166.8 - - - - - - 16.0 2777 124.8
© 2017 Fraserwoods Fabrication & Machining Ltd. 120 - 10293 276 Street, Acheson, Alberta, Canada T7X 6A5
T: +1(780) 962-1827 F: +1(780) 962-1830 E: sales@fraserwoods.ca www.fraserwoods.ca
SPECIFICATIONS
HORIZONTAL
CONFIGURATION
(Vertical Air Flow)
VERTICAL CONFIGURATION
(Horizontal Air Flow)