Professional Documents
Culture Documents
We knit the body from the bottom to the roof. We start from the base rectangle.
we cut, and continue to knit in a spiral, starting from the short side:
1p.-19sc, 3sc in next track, 41sc, 3sc in one, 40sc, 3sc in one (130)
3-18R.-sc (130)
Hood
With a ruby-red thread, we collect a chain of 20 wp and knit 22 p. sc. thread not
we crop, and continue to knit sc, starting from the short side of the rectangle:
1p. -19sc, 3sc in 1p, 21sc, 3sc in 1.18sc, 3sc in 1p, 21sc, 2sc in 1p (90)
Using sewing pins, place the hood in the hole in the body so that the base loops
bonnet adjacent to the front part of the body of the machine. We sew the side and
front of the hood
Knit in a spiral with a white thread around the remaining body hole:
1 pp. -78sc
2-16p.-sc (78)
Fasten and cut the thread.
Roof
Using a dark gray thread, we collect a chain of 20p and knit a 16p rectangle. tall.
We do not cut the thread, but bind the entire rectangle sc, starting from the long
side:
1p.-19sc, 3sc in 1p, 15sc, 3sc in 1p, 18sc, 3 sc in 1p, 15sc, 2sc in 1p (78)
Without cutting the thread, we place the roof over the opening of the body so that
the beginning of the roof coincides with
with the front of the hole, fasten with pins and tie the parts together sc, stuffing
body, as needed.
We knit directly from the edges of the roof with a ruby-red thread.
We knit strips into magic ring every corner of the roof 7sc wide and 12 rows long.
If the strips are connected correctly, then between the front and rear frames should
be
10sc.Sew frames to the body at the junction of the color change (see photo).
In dark gray we knit 5 rows for 22 s. At the end of the 5th row we tie the whole roof
around sc, making double increases into the magic ring at each corner to maintain
sharp corners.
knits from top to bottom. To avoid opening at the beginning of this part, we start
knitting with
magic ring (MR)
8p-sc (42)
Sew the grate to the body so that all sides of the grate coincide with the front
body. Embroider 2 columns of 5 rows into magic ring each lying letter with a dark
gray thread
“L”. The distance between the columns is 2-3sc, and 3 rows between each “L” (see
photo)
2p.-inc * 6 (12)
4-6p.-sc (18)
7p .- (sc, dec) * 6 (12)
8p.-dec * 6 (6)
Fasten the thread. Close the hole. Sew to the top of the grill.
2p .- (2sc in one loop) * 2, (2hdc in one loop) * 2, (2sc in one loop) * 2 (12)
Fasten the thread, cut. Sew on the windshield at a distance of 3sc from
friend. Embroider flare with white thread. Embroider eyebrows with black thread,
sky blue embroider
2p.-inc * 6 (12)
9p.-osc (48)
12 R.-Osc (48)
19 R.-dec * 6 (6)
Fasten the thread, cut it, sew the hole. Embroider on the tires with a tan thread
vertical lines from 4 to 7 rows and loops on top of 7 rows (see photo)
Sew wheels to the body of the machine. The front wheels are behind the grille, the
rear ones are in the corner of the rear
body parts so that the center of the wheels is above the bottom of the body.
2p.-inc * 6 (12)
3R.-sc (12)
5-64R.-sc (14)
66R.-dec * 6 (6)
To make the wings flat, ask around with a dark gray thread at a distance of 1sc
from
edges. (see photo) .Sew wings on both sides of the machine body at a distance of
2sc from
wheels.
Headlight (2pcs)
It consists of two parts: the front part is white and the back is ruby red.
2p.-inc * 6 (12)
3p.-white: (sc, inc) * 3, change the thread to sky blue and continue: (sc, inc) * 3
(18)
4-7R.-sc (18)
knit. Sew the headlights to the front of the machine, embroider details sky blue
Horn
Dark gray:
2p.-inc * 5 (10)
4R.-sc (15)
7-10R.-sc (8)
11 R.-inc * 8 (16)
Fasten, cut the thread. Fill with filler only until the 6th row and with a needle
close the hole at the level of the 6th row (so that the filler remains inside).
Silver thread:
2p.-inc * 5 (10)
3-28R.-sc (10)
29R.-dec * 5 (5)
Fasten and cut the thread. Close the hole. Sew the bumpers to the front and rear.
car body, making stitches only at the ends of the bumper (see photo)
Mirror (2 parts)
The mirror consists of 3 parts: the front is white, the rear is silver and the mirror
holder is silver.
White thread:
2p.-inc * 6 (12)
3p.-white: (sc, inc) * 3, change to a sky-blue thread and continue: (sc, inc) * 3 (18)
silver thread:
4R.-sc (18)
Connect the parts in 2 rows of silver sc. Stuff in the knitting process.
Mirror holder.
Silver thread:
2-7p.-sc (6)
Fasten, cut the thread. Fill in. Sew open hole to the center of the back.
mirrors. Attach both mirrors to the machine body between the front window frame
and