Professional Documents
Culture Documents
amigurumipatterns.picpin.pro/amigurumi-airplane-free-pattern
admin January 6,
2020
MATERIALS
– yarn x yarn, its analogue of different colors (for me: as in the photo):
– hook hey 2;
– scissors, needle;
1/9
abbreviations
İnc: increase
Dec: Decrease
PATTERN
2/9
Part no: 1
2-6inc = 12
3- (inc,3sc)*3= 15
4-5) 15sc
6)
(3sc,dec)*3=12sc
Part no: 2
2- (inc,sc)*3=9sc
3- (inc,2sc)*3=
12sc
4-6) 12sc
7) (dec,4sc)*2
=10sc
8)10sc
9) (dec,3sc)*2=
8sc
3/9
10) 8sc
11) (dec,2sc)*2
=6sc
12-13) 6sc
14) (inc,2sc)*2
=8sc
15) 8sc
16) (inc,3sc)*2
=10sc
17) 10sc
18) (inc,4sc)*2
=12sc
19-21) 12sc
22) (dec,2sc)*3
=9sc
23) (dec,sc)*3
=6sc
Do not stuff.
fasten, tighten
the hole. Cut the
thread, hide it.
Part 3 (2 pieces)
We knit white
yarn. Knit the
inside out
2-7inc = 14
3- (1sc, 1inc)*7 =
21
4/9
4- (2sc, 1inc)*7 =
28
5-7) 28sc
Do not stuff.
Fasten the
thread, cut,
5/9
leaving about 20
cm for threading.
Part no: 4 (2
pieces)
Knits yellow
ridges.
2-6inc = 12
3-(inc,5sc)*2=14
4-(inc,6sc)*2=16
5- (inc,7sc)*2=18
6- (inc,8sc)*2=20
7- (inc,9sc)*2=22
8- (inc,10sc)*2=24
9- 24sc
Fasten the
thread, cut. Stitch,
fold in half and
stitch. I make a
regular thread in
color. You can
sew the main
thread.
Part no: 5
6/9
We knit with yarn.
Knit lo circle.
Marker on the
side.
1) 9 ch, starting
from the second
loop 2 sc one
loop, 6sc, 3 sc 1st
loop, 6sc, sc = 18
2)
2inc,6sc,3inc,6sc,inc =24sc
3) (inc,sc)*2,6sc,(inc,sc)*3,6sc,inc,sc=30
4) (inc,2sc)*2,6sc,(inc,2sc)*3,6sc,inc,2sc=36
5) 4sc,inc,12sc,inc,4sc,inc,12sc,inc =40
6-58) 40sc
60) (dec,2sc)*2,6sc,(dec,2sc)*3,6sc,dec,2sc=30
61) (dec,sc)*2,6sc,(dec,sc)*3,6sc,dec,sc=24
If you have a cotton insole for shoes or its analogue up to 5 mm thick (you can use foam
rubber), then we cut out the part from it according to the shape of our part. Insert the
cut part into the knitted part, at the stage of knitting 59 rows. You can fill the beginning a
little and make the end a filler. If there is no insole, then you can simply fill the part in
half with a chalk, and the part should be flat.
Part no: 6
2-6inc = 12
7/9
3- (1sc, 1inc) 6 = 18
4- (2sc, 1inc) 6 = 24
5- (3sc, 1inc) * 6 = 30
6- (4sc, 1inc) 6 = 36
7- (5sc, 1inc) 6 = 42
8- 42sc
11-12) 45sc
Sew on part no: 2 n button. We look at the photo as it should be. The button is tight tight
!!!!
14-33) 48sc
34- (dec,14sc)*3 = 45
35-37) 45sc
39-41) 42sc
43-45) 39sc
47-48) 36sc
49- Change the color to red. Knit for the rear wall of the loop 36sc
8/9
45- 6dec =6sc
We stuff the detail as far as knitted. Lock the thread, tighten the hole, hide the nug.
Decoration Cut out a felt from a felt circle with a diameter of about 3-9 mm. We glue ah
on the detail of Ho 3. See photo.
To detail No: 5 was flatter it can be steamed iron. We sew parts no: 4 to part no: 6 inc
using a button; sew part no: 2 to part no: 6 See photo.
That’s all!!!
9/9