Professional Documents
Culture Documents
UG-476
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
TABLE OF CONTENTS
Required Equipment ........................................................................ 1 Windows XP Installation Procedure...............................................3
Supported Evaluation Boards ......................................................... 1 SDP Evaluation Board ..................................................................4
Contents of Installation Package (MSI File) ................................. 1 ADF4xxx USB Board ....................................................................5
Introduction ...................................................................................... 1 Windows Vista/Windows 7 Installation Procedure......................6
Revision History ............................................................................... 2
REVISION HISTORY
2/2019—Rev. C to Rev. D 1/2014—Rev. 0 to Rev. A
Changes to Supported Evaluation Boards Section ....................... 1 Changes to Supported Evaluation Boards Section ........................1
Change to Windows XP Installation Procedure Section .............3
12/2018—Rev. B to Rev. C Change to Windows Vista/Windows 7 Installation
Changes to Supported Evaluation Boards Section ....................... 1 Procedure Section..............................................................................6
Rev. D | Page 2 of 8
PLL Software Installation Guide UG-476
11016-005
4. Click Next.
Figure 3. Confirm Installation
11016-006
5. Choose an installation directory and click Next.
Figure 4. Software Installation
8. Click Close.
11016-004
11016-007
11016-102
11016-100
Figure 6. Found New Hardware Wizard Figure 8. Completing the Found New Hardware Wizard
Rev. D | Page 4 of 8
PLL Software Installation Guide UG-476
ADF4xxx USB BOARD
1. Choose Yes, this time only and click Next. 3. Click Continue Anyway.
11016-103
11016-105
Figure 9. Found New Hardware Wizard Figure 11. Hardware Installation Complete
2. Choose Install the software automatically 4. Click Finish.
(Recommended) and click Next.
11016-106
11016-104
Rev. D | Page 5 of 8
UG-476 PLL Software Installation Guide
11016-010
Figure 15. Confirm Installation
7. Click Install.
11016-008
11016-011
Figure 16. Software Installation
11016-009
Rev. D | Page 6 of 8
PLL Software Installation Guide UG-476
8. Click Close.
11016-012
Figure 17. Installation Complete
Rev. D | Page 7 of 8
UG-476 PLL Software Installation Guide
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Rev. D | Page 8 of 8