Professional Documents
Culture Documents
COURSE PROSPECTUS
Duration: 6 Months
Preamble: Emergence of India as a global economy has opened up a huge demand for
electronic products. National Policy on Electronics and Make in India initiative of
Government of India has resulted in setting up of many industries in the Electronics Sector
and has led to a huge demand for trained man power in Electronics System Design and
Manufacture (ESDM).
Outcome of the Course: On successful completion of the Course, the Participants shall
Be able to specify, Design, Develop and Test electronic Products.
Get exposure to Industrial Design of Electronic Products
Course Structure: This course consist of nine modules including 6 months internship. After
successful completion of first six modules (PD 901 to PD 906), Students will undergo a 6
months internship either at the associated industries of Maker Village or any other industry
in electronic sector.
The modules are as follows:
PD 500 Module Name Duration
(Weeks)
PD 501 Industrial Design of Electronic Products 2
PD 502 Electronic Circuit Design 3
PD 503 Electronic board design and bring up 4
PD 504 Processor based System Design 5
PD 505 Networking & IOT 4
PD 506 Project Work 6
Page 1/5
National Institute of Electronics and
Information Technology, Calicut
CDS/CA/7.5.1/F 40/R11
Other Contents
a. Course Fees :
General Candidates: Course fee is Rs. 70,000/- + GST at actuals
SC/ST Candidates: Tuition Fees are waived for SC/ST students admitted under
SCSP/TSP. However they are required to remit an amount of Rs. 8500/- as Advance
caution/security deposit. This amount will be considered as caution/security deposit
and will be refunded after successful completion of the course. If the student fails to
complete the course successfully this amount along with any other caution/security
deposits by the student will be forfeited.
However above the registration fee shall be refunded on few special cases as given
below
Student register and pay fee for more than one course and join for any one course,
fee paid for remaining shall be refunded
Course postponed and new date is not convenient for the student
Course cancelled in advance, well before the admission date
c. Course Fee Installment Structure: Students can pay the full fees of Rs. 82600/-
(Rs. 70000/- + GST) in advance or as installments as given below
Fees *Amount for General Amount for SC/ST Due Date (on or
Candidates Candidates before)
**Advance Rs. 10000/- Rs. 8500/- 11/02/2019
Fee (refundable after
successful completion
of course)
1st Rs. 31,300/- (if Nil 18/02/2019
Installment advance deposit paid)
else Rs. 41,300/-
2nd Rs. 41,300/- Nil 24/04/2019
Installment
* Above fees is inclusive GST @actuals (18%) and revision if any will be applicable at the
time of payment.
** Advance fee - After publication of first selection list, the students in the first selection list
have to pay the Advance Deposit within one week to take the provisional
admission. Students in the additional selection list should pay both
Advance and First installment fee together on or before counseling day
Page 2/5
National Institute of Electronics and
Information Technology, Calicut
CDS/CA/7.5.1/F 40/R11
d. Eligibility:
M.E/M.Tech/BE/B.Tech(ECE/EEE/AEI/CSE/IT/Mechatronics/Biomedical and
allied branches)
Or
M.Sc (Electronics/CS and allied branches).
e. Number of Seats : 20
The Institute will not be responsible for any mistakes done by either the bank concerned
or by the depositor while remitting the amount into our account.
i. Counseling/Admission : 18/02/2019
j. Spot Admission: Unfilled/vacant seats are filled through spot admission. Spot
admission (if open) will close within 15 days of Counseling/Admission of a particular
course. On spot admission students should provide an undertaking saying that he/she
is fully aware that he/she missed so much days of class and will not ask for extra
classes or further extension of course. (only 5 days for certificate courses)
Page 3/5
National Institute of Electronics and
Information Technology, Calicut
CDS/CA/7.5.1/F 40/R11
SC/ST Certificate (Original and two attested copies, if applicable)
Govt. issued photo id card (Aadhaar mandatory for SC/ST candidates.
Original and one copy)
l. Discontinuing the course: No fees (including the caution/security deposit) under any
circumstances, shall be refunded in the event of a student discontinuing the course. No
certificate shall be issued for the classes attended.
m. Course Timings: This program is a practical oriented one and hence there shall be
more lab than theory classes. The classes and labs are from 9.30 am to 12.45 pm and
1.30 pm to 5.00 pm Monday to Friday. During project work, the timings are from 9.15
am to 5.15 pm. The theory to lab proportion is 30:70.
n. Location and how to reach: NIELIT Calicut is located very close to NIT campus and
is about 22Kms from the Calicut (Kozhikode) city. A number of buses (Buses to NIT
via Kunnamangalam) are available from "Palayam Bus Stand and KSRTC Bus Stand".
The bus stop at our Institute is called "Panthrand" and is one stop before NIT. The bus
fare is around Rs.20/- from Calicut City to NIELIT.
Calicut (Kozhikode) is well connected by Rail, Road and Air form different parts of
the country. The maximum and minimum temperatures range between 350C and 20oC.
o. Course enquiries: Students can enquire about the various courses either on telephone
or by personal contact between 9.15 A.M. to 5.15 P.M. (Lunch time 1.00 pm to 1.30
pm) Monday to Friday.
p. Important Dates:
Last date for receiving completed First selection list will be prepared
application forms based on the applications received on
or before 04.02.2019. The additional
selection list will be prepared based
on the applications received on or
before 11.02.2019, and excluding the
applicants, included in the first
selection list.
Publication of first selection list in the 04.02.2019
Website http://calicut.nielit.gov.in/
Page 4/5
National Institute of Electronics and
Information Technology, Calicut
CDS/CA/7.5.1/F 40/R11
r. Hostel facilities: Hostel accommodation is available for boys and girls on monthly or
daily chargeable basis. The hostel fee varies from Rs.1,400 /- to Rs.1,500/- per month
depending on the type of accommodation. However, students are required to pay the
hostel fees for the entire duration of the course for which they are seeking admission
at the time of joining the course itself.
s. Boarding facilities : Canteen & Mess facility is available for both boys & girls,
students, those who avail mess facility should pay monthly mess fee @Rs.130/*- per
day. An amount of Rs.1,000/- should be paid as mess advance to the Canteen
Contractor at the time of joining the mess which will be adjusted in the last month
mess fee.
An amount of Rs.3,000/- should be paid as caution deposit (hostel & mess) at the time
of joining the hostel which will be refunded/adjusted at the end of the course. For
students not availing hostel facility, Rs.1,000/- will be the caution deposit
Lab Facilities: CREO CAD Design tools, 3D Printer, PCB design tools such as
OrCAD Capture, OrCAD PCB Layout Plus, PROTEUS VSM, Digital Storage
Oscilloscopes, SMD soldering station, Power Harmonic Analyzer, High Precision
Digital Multi meters, PCB Fab Lab, PCB Prototyping Machine, SMT Assembly setup
(Stencil Printing, Pick & Place, Reflow oven etc), Thermal Imaging Camera, AC/DC
Electronic Load; ARM Based development kits for IOT like Raspberry Pi, esp32,
Network Protocol Analyzers,
t. Course Contents : Please click in the link for the detailed syllabus
Page 5/5