Professional Documents
Culture Documents
EXPERIMENT 1
Name:______________________________________________________________ Class: __________
3. Label the following measuring instrument, and state their unit and sensitivity.
Name Name
Unit Unit
Sensitivity Sensitivity
Name Name
Unit Unit
Sensitivity Sensitivity
4. Complete the table below with the best possible answer.
Type of
Physical Quantities Measuring Instrument
measurement
Length of metal rod
Length and width of lab manual
Mass of ball bearing
Diameter of ball bearing
Diameter of coin
External diameter of the glass rod
7. The diameter of a slotted mass is 3.15 cm, measured by using a vernier calliper.
How do you record this data in your report?
(i)
Main scale :
Vernier scale :
Actual scale :
(ii)
Main scale :
Vernier scale :
Actual scale :
(iv)
Main scale :
Vernier scale :
Actual scale :
(v)
Main scale :
Vernier scale :
Actual scale :
10. Given that the diameter of a ball bearing, measured using a micrometer screw
gauge is 2.51 mm. Determine the volume of the ball bearing and express your
answer as (V ± ΔV).