Professional Documents
Culture Documents
SOLUTION
IntelliSAW CAM platform offers real-time,
82% of Asset breakdown / loss
continuous monitoring with non-invasive,
are due to random failures.
wireless, passive sensors.
Majority of currently installed Asset Failure Mode Measurement
critical assets are 25+ years old
Poor Connections Temperature
and beyond design life.
Insulation Degradation Partial Discharge
Nearly 20% of refinery power
Air Dielectric Breakdown Humidity
disruptions are the result of
electrical equipment failures.
APPLICATIONS
One arc flash incident could
Critical Assets in the 1kV - 60kV range:
cost up to $15 million including
• Switchgear
employee health care, asset • Bus Ducts
replacement, and lost production. • Generator Circuit Breakers
• Transformers
• Rectifier Stacks
• Capacitor Banks
HOW IT WORKS
Temperature Monitoring
Wireless, passive Surface Acoustic Wave
(SAW) sensors are directly mounted to critical
measurement locations while antennas
are mounted to the walls of the asset. RF
interrogation signals between monitoring unit and
sensors are used to determine the temperature.
Reduce manual rounds / truck rolls Optimize asset performance Predict and prevent
Minimize downtime Proactive planning and repair Monitor limited access areas
920.00359.0001 R2.1