Professional Documents
Culture Documents
Flajer Kovački Centar Eng PDF
Flajer Kovački Centar Eng PDF
Flajer Kovački Centar Eng PDF
Valjevo
" Kovački centar "d.o.o was founded in 2010. Yugoimport SDPR financed the construction and
it is a majority owner, and HK Krušik a.d. Valjevo provided the infrastructure, as a ownership
share.
• Hot forging and pressing on mechanical and hydraulic presses and hammers on steel
forgings , non-ferrous metals and their alloys through the deformation process of metals
by compression, deep punching or counter-extrusion and by passing through the rings.
Bushings are obtained with or without bottom, of the following dimensions:
− external diameter up to 180 mm
− internal diameter up to 140 mm
− length up to 700 mm
− mass up to 70 kg
• In addition to the above mentioned basic technologies, there are also accompanying
technologies:
− machining,
− heat treatment,
− cleaning of forgings surface by sand blasting and the like.
• All the products from the production programme during and after finished production
are are subjected to demanding quality checks, whereof quality certificates are issued
according to the valid standards.
KOVAČKI CENTAR d.o.o.
Vladike Nikolaja 59
14000 Valjevo
FORGINGS OF ALUMINIUM AND COPPER ALLOYS
ANTIAIRCRAFT AMUMUNITION 57 mm
MORTAR SHELLS 60 mm