Professional Documents
Culture Documents
* 3 ROLL BENDING
www.canadoilgroup.com
Canadoil Pipe Ltd.
LSAW Pipes
PIPES
LSAW PIPES (Longitudinal Slam Submerged Arc Welded)
Diameter Range : 250 mm. (10”) to 3048 mm. (120”)
Thickness Range : 6.4 mm. (0.25”) to 100 mm. (4.0”)
Lengths : 3 meters (72” to 120”)
12 meters (10” to 72”)
15 meters (16” to 72”)
Materials : Carbon Steel, Stainless Steel, Alloy Steel,
and Stainless or Alloy Clad Steel
www.canadoilgroup.com
Canadoil Pipe Ltd.
Plate Plate Edge Roll Bending Post Bending Tack Welding Welding Tabs
Beveling
Marking
Plate Plate Edge Pre Bending JCO Press Tack Welding Welding Tabs
Beveling
www.canadoilgroup.com
Canadoil Pipe Ltd.
Quality Control
At all stages of our business and manufacturing fully comply with international quality standards, such as:
Specification Title
API 5L Line pipe
2B Specification for the Fabrication of Structural Steel Pipe
ASTM A53 Welded and Seamless Steel Pipe
A134 Electric-Fusion (Arc) - Welded Steel Plate Pipe
A139 Electric-Fusion (Arc) - Welded Steel Pipe
A252 Welded and Seamless Steel Pipe Piles
A671 Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperature
A672 Electric-Fusion-Welded Steel Pipe for High Pressure Service at Moderate Temperature
B5 3601 Steel Pipes and Tubes for Pressure Purpose Carbon Steel : Ordinary Duties
3602 Steel Pipes and Tubes for Pressure Purpose Carbon Steel High Duties
3604 Steel Pipes and Tubes for Pressure Purpose Low and Medium - alloy Steel
DIN 1626 Welded Circular Unalloyed Steel Tubes Subject to special requirement
1628 High performance Welded Circular Unalloyed Steel Tube
17172 Steel Pipes for Pipe lines for the Transport of Combustible Fluids and Gases Technical Conditions of Delivery
DIN G3444 Carbon Steel Tubes for General Structural Purposes
G3457 Electric-Arc-Welded Carbon Streel Pipe
CSA Z245.1 General Requirements for Plain-End Welded and Seamless Steel Line Pipe
AWWA C200 Steel Water Pipe 6 Inches and Larger
www.canadoilgroup.com
Canadoil Pipe Ltd.
Physical Requirement
Standard PSL1/PSL2
Specification C Mn P S Ti Tensile Yield Elongation Gauge
MAX MAX MAX MAX MAX Strength Strength (Min %) Length (in)
e = 625,000 x A 0.9
Min. 48,000psi Min. 30,000psi 0.2
A 0.22/ - 0.90/ - 0.03/0.025 0.03/0.015 - 2
(33.7 kg/mm2) (21.1 kg/mm2) U
e = 625,000 x A 0.9
Min. 60,000psi Min. 35,000psi 0.2
B 0.26/0.22 1.20 0.03/0.025 0.03/0.015 0.04 2
(42.2 kg/mm2) (24.6 kg/mm2) U
Min. 60,000psi Min. 42,000psi e = 625,000 x A 0.9
0.2
X 42 0.26/0.22 1.30 0.03/0.025 0.03/0.015 0.04
(42.2 kg/mm2) (29.5 kg/mm2) U 2
Pipe furnished to this specification shall be fabricated from steel plate specified by the purchaser.
TENSILE TESTS - Longitudinal, Transverse and Weld TensileTests shall be carried out at the frequency of one test per inspection lot.
GUIDED BEND TESTS - Guided Bend Tests of longitudinal seam weld shall be carried out for each lot of 50 lengths or less, of each combination
of specified outside diameter, specified wall thickness and grade.
HYDROSTATIC TESTS - Each length of pipe shall pass a Hydrostatic Test of at least the minimum test pressure and duration specified in API 5L.
FRACTURE TOUGHNESS TESTS - CHARPY tests shall be carried out at the frequency of one test per heat per combination of pipe size and
specifies wall thickness.
www.canadoilgroup.com
Canadoil Pipe Ltd.
* VACUUM LIFTER HANDLING OF PLATES * RAW MATERIAL STOCK FOR SHORT DELIVERY TIMES
Weight Formula
Definition: A more accurate constant of 0.0246615 is
D Diameter in millimetre or inch used in EN 10208 and ISO 3183.
D1 Small diameter
D2 large diameter For weights per meter of pipe and tube
of other materials, replace the constant
t Wall thickness in millimetre or inch (0.02466) in the formula above as follows:
Weight per meter = (D - t) × t × 0.02466 in kgs. Weight per foot = (D - t) × t × 10.68 in lbs.
www.canadoilgroup.com
Canadoil Pipe Ltd.
www.canadoilgroup.com
Canadoil Pipe Ltd.
* HEAT TREATMENT
www.canadoilgroup.com
Canadoil Pipe Ltd.
X70 483 N / mm² X52 & X56 359 & 386 N / mm²
Max Pipe Length 12.2 m. (40’) Material / Yield
X65 448 N / mm² X35 & X42 241 & 290 N / mm²
PIPE WALL THICKNESS IN MM
MM INCH 8.00-16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 27.00 28.00 29.00 30.00 31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 39.00 40.00
406.40 16”
457.20 18”
508.00 20”
558.00 22”
609.60 24”
660.40 26”
711.20 28”
762.00 30”
812.80 32”
863.60 34”
914.40 36”
965.20 38”
1,016.00 40”
1,066.80 42”
1,117.60 44”
1,168.40 46”
1,219.20 48”
1,270.00 50”
1,320.00 52”
1,371.60 54”
1,422.40 56”
1,473.20 58”
1,524.00 60”
www.canadoilgroup.com
Canadoil Pipe Ltd.
WALL THICKNESS
ACCORDING TO ASME B 36.10 M
Nominal Outside
Pipe Size Diam. Wall Thickness in mm.
inches mm. Sch 5 Sch 10 Sch 20 Sch 30 Std Sch 40 XS Sch 60 Sch 80 Sch 80S Sch 100 XXS Sch 120 Sch 140 Sch 160
10” 273.1 3.40 6.35 7.80 9.27 9.27 12.70 12.70 15.09 12.70 18.26 25.40 21.44 25.40 28.58
12” 323.9 3.96 6.35 8.38 9.53 10.31 12.70 14.27 17.48 12.70 21.44 25.40 25.40 28.58 33.32
14” 355.6 3.96 6.35 7.92 9.53 9.53 11.13 12.70 15.09 19.05 23.83 27.79 31.75 35.71
16” 406.4 4.19 6.35 7.92 9.53 9.53 12.70 12.70 16.66 21.44 26.19 30.96 36.53 40.49
18” 457.0 4.19 6.35 7.92 11.13 9.53 14.27 12.70 19.05 23.83 29.36 34.93 39.67 45.24
20” 508.0 4.78 6.35 9.53 12.70 9.53 15.09 12.70 20.62 26.19 32.54 38.10 44.45 50.01
22” 559.0 4.78 6.35 9.53 12.70 9.53 12.70 22.23 28.58 34.93 41.28 47.63 53.98
24” 610.0 5.54 6.35 9.53 14.27 9.53 17.48 12.70 24.61 30.96 38.89 46.02 52.37 59.54
26” 660.0 7.92 12.70 9.53 12.70
28” 711.0 7.92 12.70 15.88 9.53 12.70
30” 762.0 6.35 7.92 12.70 15.88 9.53 12.70
32” 813.0 7.92 12.70 15.88 9.53 17.48 12.70
34” 864.0 7.92 12.70 15.88 9.53 17.48 12.70
36” 914.0 7.92 12.70 15.88 9.53 19.05 12.70
38” 965.0 9.53 12.70
40” 1016.0 9.53 12.70
42” 1067.0 9.53 12.70
44” 1118.0 9.53 12.70
46” 1168.0 9.53 12.70
48” 1219.0 9.53 12.70
52” 1321.0
56” 1422.0
60” 1524.0
64” 1626.0
68” 1727.0
72” 1829.0
www.canadoilgroup.com